ページ1に含まれる内容の要旨
AVT-1928
The serial number is located on the rear of the set.
For future reference, please copy the number here.
Serial No._________________________________
19” COLOR TELEVISION
INSTRUCTION MANUAL
PPLICATIONS, L.L.C. PECIALIZED UDIOVOX
ページ2に含まれる内容の要旨
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to important operating and servicing instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of produ
ページ3に含まれる内容の要旨
Table of Contents Important Safeguards……………………………………………………………..2 Chapter1: Overview of Your equipment………………………………………..4 Your TV’s Front Panel……………………………………………………….4 Your TV’s Back Panel……………………………………………………….4 ontrol………………………………………………………...5 Installing your remote control batteries……………………………….6 Notes……………………………………………………………………..6 Chapter 2: Connecting an Antenna or Cable to your TV…………………….7 Connecting an Antenna……………………………………………………...7 ing a Cable System………………………………………………...8 Safet
ページ4に含まれる内容の要旨
the like. 2- Important Safeguards lightning and power line surges. damage to the equipment due to cable system. This will prevent outlet and disconnect the antenna or periods of time, unplug it from the wall unattended and unused for long lightning storm, or when it is left television equipment during a blocked, or covered. The 12. For added protection for this overheating, these openings must not be marked on the television eq
ページ5に含まれる内容の要旨
c) f) Important Safeguards-3 a need for service. in performance this indicates exhibits a distinct change When the television equipment damaged. dropped or the cabinet has been If the television equipment has been e) to its normal operation. technician to restore the TV receiver extensive work by a qualified result in damage and will often require adjustment of other controls may operating instructions as an improper those controls that are covered by
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Your Remote Control 1. Use this button to turn your TV on or off. 2. CH Use these buttons to change channels on your TV, or select items in the menu 3. VOL Use these buttons to change your TV’s volume, to activate selections in the menu system, or to change audio and video settings. 4. system on and off. 5. RECALL Press this button to display the channel 6. Use this button to add a channel to the 7. MUTE Use to turn the TV’s sound on and off. 8. 0-9 Use these buttons to change channel
ページ8に含まれる内容の要旨
Installing your remote control batteries 1. Open the battery compartment on the back of the remote control. 2. Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-“ terminals are oriented correctly. 3. Replace the cover. Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire. Point your remote at
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
Chapter 2: Connecting to an Antenna or Cable to your TV- 7 Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300 ohm leads, combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner onto the antenna terminal on
ページ11に含まれる内容の要旨
If your cable system requires you to use a converter box for all channels, cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. If your cable system only requires you to use a converter box for some channels (i.e. pay-TV follow these steps: Find the primary incoming coaxial cable. Plug this cable into the splitter available at your local electronics store). Connect the one coaxial cable between
ページ12に含まれる内容の要旨
3 Operating Your TV Once you have connected your TV to an antenna or cable system, unplugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of the available channels. Turning Your TV On 1. To turn on your TV, press the POWER button on the remote control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV’s Channel M
ページ13に含まれる内容の要旨
You can change channels in three ways: 1. The CH buttons take you through all memorized channels, one by one. The Ch buttons will not access channels that have not been information about programming channels into memory, see the section “Programming your TV’s Channel Memory,” above. 2. The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter it’s number; the TV will tune to the new channel when you enter the second digit of the
ページ14に含まれる内容の要旨
1. Tune to the channel you want to erase. 2. Press the ADD/ERA button on the remote control. The channel will turn from green to magenta to show it has been erased. 1. 2. Use the CH buttons to select SETUP and press VOL . 3. Use the CH buttons to select EDIT PROGRAM. If the channel is in memory, it will be labeled “ADD”, and the number in the corner will be green. If the channel is not in memory, it will be labeled “ERASE”, and the number in the corner will be magenta. 4. Use the VO L
ページ15に含まれる内容の要旨
Adjusting Video Settings You may wish to adjust the video settings (e.g. contrast or color) to obtain the most pleasing picture. To do so follow these directions: 1. With the TV on, press the MENU button. 2. Use the CH buttons to select PICTURE. 3. Press the VO L button. The picture menu will appear. 4. The AUTO feature will be selected. Use the VOL button to turn AUTO to OFF. This will allow you to manually adjust the video settings. 5. Use the CH buttons to select the video setting
ページ16に含まれる内容の要旨
Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps: 1. Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page. 2. Press the VO L button to set the AUTO setting to ON. This will return all video settings to their default levels, as set at the factory. 3. You can also return to the factory settings during normal TV viewing by pressing the AUTO.PICT button on the remo
ページ17に含まれる内容の要旨
4 Using Timer Functions Your TV has a built in clock, and you can set the TV to turn on and off at times that you select. 1. With the TV turned on, press the MENU button. 2. Use the CH buttons to select TIMER. 3. Press the VO L button. The TIMER menu will be displayed. Setting the Clock 1. Follow steps 1-3 in “Accessing the Timer Menu”, above. 2. Press CH buttons to select CLOCK. 3. Press the VO L button to set the hours (including AM/PM); press the VOL button to set quickly. 4. When t
ページ18に含まれる内容の要旨
Setting the On Timer 1. Follow steps 1-3 in ”Accessing the Timer Menu” on the previous page. 2. Use the CH buttons to select ON TIME. 3. Press the VOL button to set the hours (including AM/PM); press the VOL button to set quickly. 4. When the setting is correct, use the C H buttons to select another timer function, or use Setting the Off Timer 1. Follow steps 1-3 in “Accessing the Timer Menu” on the previous page. 2. Use the CH buttons to select OFF TIME. 16- Chapter 4: Using Timer Funct
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
