ページ1に含まれる内容の要旨
4-081-775-22
TM
Operating Instructions
KV-32FV27 KV-36FV27
© 2001 by Sony Corporation
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
WARNING NOTIFICATION To reduce the risk of fire or shock hazard, do not expose the TV to This equipment has been tested and found to comply with the rain or moisture. limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy CAUTION and, if not installed and used in accordance with the in
ページ4に含まれる内容の要旨
Important Safeguards For your protection, please read these instructions completely, and Cleaning keep this manual for future reference. Unplug the set from the wall outlet before Carefully observe and comply with all warnings, cautions and cleaning or polishing it. Do not use liquid instructions placed on the set or described in the operating cleaners or aerosol cleaners. Use a cloth lightly instructions or service manual. dampened with water for cleaning the exterior of the set. WARNING I
ページ5に含まれる内容の要旨
Power-Cord Protection Service Do not allow anything to rest on or roll over the power cord, and do not place the set where the Damage Requiring Service power cord is subject to wear or abuse. Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: Antennas ❑ When the power cord or plug is damaged or frayed. Outdoor Antenna Grounding If an outdoor antenna is installed, follow the precautions below. An ❑ If liquid has been spilled
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Contents Introducing the FD Trinitron Wega Using the Features Overview................................................................1 Overview..............................................................29 Presenting the FD Trinitron Wega......................2 Using Favorite Channels....................................30 Package Contents..................................................3 Using Picture in Picture (PIP) ...........................31 Using the Remote Control ...................
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Introducing the FD Trinitron Wega Overview This chapter defines the contents of your Wega TV and provides an overview of how to set up and use basic features. Topic Page Presenting the FD Trinitron Wega 2 Package Contents 3 Using the Remote Control 3 1
ページ10に含まれる内容の要旨
Introducing the FD Trinitron Wega Presenting the FD Trinitron Wega The FD Trinitron Wega (pronounced VAY-GAH) is characterized by outstanding contrast, uncompromising accuracy, and corner-to- corner detail. You’ll recognize the superiority of Wega technology almost immediately. The first thing you probably will notice is minimal glare from the flat picture tube. This flat-screen technology improves picture detail without distortion, unlike conventional curved screens. The FD Trinitron de
ページ11に含まれる内容の要旨
Introducing the FD Trinitron Wega Package Contents Along with your new Trinitron TV, the packing box contains a remote control, a pair of wireless headphones, and three AA batteries (two for the remote control, one for the headphones). These items are all you need to set it up and operate the TV in its basic configuration. Most peripherals come with the necessary cables to connect them. If you want to set up special configurations, you may need to buy extra cables or connectors. It is best
ページ12に含まれる内容の要旨
Introducing the FD Trinitron Wega Button Descriptions The POWER button on the remote control (no. 13 in the illustration below) activates both the remote control and the TV. Outside Panel Button Description 1 MUTING Press to mute the sound. Press again or press VOL + to restore the sound. qd 1 2 SYSTEM OFF Powers off all Sony equipment at once. (This feature may not work with older Sony equipment.) qf 2 3 SLEEP Press repeatedly until the TV displays the time in minutes 3 qg (15, 30, 45, 60,
ページ13に含まれる内容の要旨
Introducing the FD Trinitron Wega Button Description qg TV/VIDEO Cycles through the video equipment connected to the TV’s video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4. qh ANT Changes between the VHF/UHF input to the AUX input. qj 0 – 9 and ENTER Press 0 - 9 to select a channel, the channel changes after 2 seconds. Press ENTER to select immediately. qk SWAP Switches the position of the main picture with the window picture. ql Turns on/off PIP. For details, see “Using Picture in Picture
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
Installing the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Page TV Controls and Connectors 8 Basic Connections (Connecting a Cable or Antenna) 10 Connecting a VCR and Cable 14 Connecting a VCR and Cable Box 15 Connecting Two VCRs for Tape Editing 18 Connecting a Satellite Receiver 19 Connecting a Satellite Receiver with a VCR 20 Connecting an Audio Receiver 22 Connecting a DVD Player with Component Video 23 Connectors Connecting a DVD Player with A/V
ページ16に含まれる内容の要旨
Installing the TV TV Controls and Connectors Front Panel Menu The front panel menu controls allow access to the on-screen menus without the use of a remote control. Pressing the MENU button brings Controls up the on-screen menus. The arrow buttons (Vv) move the on-screen cursor in the menus and the ( ) button selects the menu item. TV Rear Panel Model KV-36FV27 4 9 1 2 5 3 7 6 8 Back Panel Descriptions Connection Description 1 AUX Allows you to view local and cable channels if your cable
ページ17に含まれる内容の要旨
Installing the TV Connection Description 4S VIDEO Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped video component. Provides better picture quality than the VHF/UHF jacks or the Video IN jack. 5MONITOR OUT Lets you record the program you are watching to a VCR. When two VCRs are connected (see page 18), you can use your TV as a monitor for tape-to-tape editing. 6AUDIO (L/R)/ Connects to the audio and video OUT jacks on your VCR VIDEO or other video component. A third
ページ18に含まれる内容の要旨
Installing the TV Basic Connections (Connecting a Cable or Antenna) Connecting Directly The connection you choose depends on the cable found in your home. to Cable or to an Antenna Newer homes usually have standard coaxial cable: VHF Only or VHF/UHF or Cable VHF/UHF 75-ohm coaxial Rear of TV cable Older homes may have 300-ohm, twin-lead cable: VHF Only or UHF Only or VHF/UHF 300-ohm twin VHF/UHF lead cable Rear of TV Antenna connector Other homes may have both: VHF and UHF 75-ohm coaxial c
ページ19に含まれる内容の要旨
Installing the TV Cable and Antenna If your cable provider does not feature local channels, you may find this set-up convenient. AUX CATV cable Rear of TV TO CONVERTER (No connection to TO CONVERTER) VHF/UHF Antenna cable To receive channels using an antenna, instead of using the CATV cable 1 Select antenna mode by pressing the ANT button on the remote control. (This is a toggle: pressing the button once selects antenna mode; pressing the button again selects cable mode.) 2 Turn the Cable to
ページ20に含まれる内容の要旨
Installing the TV (Continued from the previous page) 1 Connect the Cable TV cable to the TV’s VHF/UHF jack. 2 Using a coaxial cable, connect the TV’s TO CONVERTER jack to the cable box’s IN jack. The TV’s internal converter allows you to switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter. 3 Using a coaxial cable, connect the cable box’s OUT jack to the TV’s AUX jack. 75-ohm coaxi
