ページ1に含まれる内容の要旨
4-084-117-13(1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-TG21
KV-PG14
M90
M72
© 2001 Sony Corporation
ページ2に含まれる内容の要旨
b b A Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components. (See E) Step 3 Plug in the power cord, then press ! on the TV to turn it on. SELECT Step 4 Press SELECT and PROGR + on the TV at the same time for one to two seconds to preset the channe
ページ3に含まれる内容の要旨
B WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately w
ページ4に含まれる内容の要旨
WARNING (continued) Do not plug in too many appliances to the same Do not place any objects on the TV. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned Install the TV on a stable TV stand and floor off, it is still connected to the AC power source which can support the TV set weight. Ensure that (mains) as long as the power cord is plugged in. the TV stand surface is flat and its area is larger Unplug
ページ5に含まれる内容の要旨
D TV front and rear panels TV rear panel 0 R L(MONO) qa qs TV front panel ! (MONO) R L SELECT PROGR 9 8 7 6 5 4 321 Button Function 1 ! Turn off or turn on the TV. 2 Remote control sensor. 3 1 Standby indicator. 3 Stereo/bilingual indicator. (KV-TG21M90 only) 3 Bilingual indicator. (KV-PG14M72 only) 3 Wake Up indicator. 4 PROGR +/– Select program number. 5 2 +/– * Adjust volume. 6t Select TV or video input. 7 SELECT Select the desired item. 8 i Headphone terminal. (KV-TG21 only) 8 Earphone t
ページ6に含まれる内容の要旨
E Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) R L Audio/Video cable (not supplied) Camcorder TV rear panel Video game equipment R L(MONO) Antenna cable (not supplied) Audio/Video cable (not supplied) VCR Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) TV rear pane
ページ7に含まれる内容の要旨
F Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Symptom Solutions Snowy picture, • Check the antenna cable and connection on the TV, VCR and on the wall. noisy sound • Preset the channel manually again. (See J) • Check the antenna setup. Contact a Sony dealer for advice. Good picture, • Select the appropriate TV system. (See J) noisy sound • Press A/B until the sound is optimal. (KV-TG21M90
ページ8に含まれる内容の要旨
G Specifications KV-TG21M90 KV-PG14M72 Note Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM,NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual NICAM Bilingual B/G, I, D/K B/G, I, D/K; A2 Stereo/ Bilingual B/G Channel coverage B/G VHF : E2 to E12 UHF: E21 to E69 CATV : S01 to S03, S1 to S41 I UHF : B21 to B68 CATV : S01 to S03, S1 to S41 D/K VHF: C1 to C12, R1 to R12 UHF
ページ9に含まれる内容の要旨
H Remote control Button Function See 0 1 ?/1 Turn off temporarily or – qa 1 turn on the TV. – 2 a Display the TV program. qs 2 – qd 3 JUMP Jump to previous 1 2 3 program number. 4 PROGR +/– Select program number. – 4 6 5 qf 5 2 +/– Adjust volume. – 7 8 9 – 6 SELECT Select the desired item. JUMP - 0 3 7 PIC MODE Select picture mode. K SOUND PROGR 2 MODE 4 9 +/– Adjust items. – qg 0 Display on-screen – 5 information. qh qa % Mute the sound. – qj 6 – qd t Select TV or video input. – qf 0 – 9, ÷ Inp
ページ10に含まれる内容の要旨
I Setting the timers You can turn on and off your TV by using the and buttons respectively. Setting the Wake Up timer \/1 Press until the desired period of time appears 1 on the screen. 1 3 2 4 5 6 WAKE UP TIMER:0H10M (After 10 minutes) 7 8 9 - JUMP 0 SOUND 2 PROGR MODE WAKE UP TIMER:OFF WAKE UP TIMER:12H00M (No Wake Up timer) (After 12 hours) The Wake Up timer starts immediately after you FAVORITE have set it. Select the program number or video input you 2 want to wake up to. TV Press \
ページ11に含まれる内容の要旨
J Presetting channels You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. Presetting channels automatically from a specified program number Press SELECT until “AUTO PROGRAM” appears 1 2 3 1 on the screen. Number 4 5 6 buttons 7 8 9 Press + or – once to enter the “AUTO 2 JUMP - 0 PROGRAM” mode. SOUND 2 PROGR MODE The on-screen display will start flashing. Press PROGR
ページ12に含まれる内容の要旨
Presetting channels (continued) To change the TV system setting If the picture or sound is abnormal when receiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears on the screen. (2) Press + or – to select the appropriate TV system until the picture or sound quality is optimal. B/G I D/K M To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) terminal (1) Pr
ページ13に含まれる内容の要旨
K Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. Selecting the picture mode Press PIC MODE to select the desired picture mode. Select To 1 2 3 “DYNAMIC” view high contrast pictures. 4 5 6 7 8 9 “STANDARD” view normal contrast pictures. JUMP - 0 SOUND PROGR “SOFT” view mild pictures. 2 MODE SOUND MODE Selecting the sound mode SELECT + or – B KV-TG21M90 only Press SOUND MODE to select the desired sou
ページ14に含まれる内容の要旨
Good morning! L Adjusting the picture position B KV-TG21M90 only If the picture is slanting, you can adjust the picture position using the “PIC ROTATION” function until it is optimal. Slanting Optimal Good morning! Press SELECT repeatedly until “PIC ROTATION” 1 appears on the screen. + or – Press + or – to adjust the picture position. FAVORITE 2 SELECT + The or icon on the screen flashes while adjusting. Note • To reduce the slanting picture, keep external speake
ページ15に含まれる内容の要旨
M Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) NICAM MONO 1 2 3 NICAM t stereo (Regular sound) (Stereo sound) 4 6 5 (KV-TG21M90 only) 7 8 9 - JUMP 0 NICAM SOUND 2 PROGR MODE NICAM MAIN NICAM SUB MONO tt bilingual (Main sound) (Sub sound) (Regular sound) A/B NICAM MONO NICAM MAIN t monaural FAVORITE (Regular sound) (Main
