ページ1に含まれる内容の要旨
2-687-422-E2 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-AZ212
M91
© 2006 Sony Corporation
01GB01COV-SOEMRus.p65 1 5/15/07, 2:05 PM
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
ページ2に含まれる内容の要旨
A Specifications KV-AZ212M91 Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual B/G, I, D/K; A2 Stereo/ Bilingual B/G Teletext language English, Russian Channel coverage B/G VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 I UHF : B21 to B68 /CATV : S01 to S03, S1 to S41 D/K VHF : C1 to C12, R1 to R12
ページ3に含まれる内容の要旨
B WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. •To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
ページ4に含まれる内容の要旨
b b C Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips •Your TV can receive both TV and FM radio signals from the appropriate connections through the 8 (antenna input) terminal (see E). •You can also connect your TV to other optional components (see E). Step 3 Plug in the power cord, then press ! on the TV to turn
ページ5に含まれる内容の要旨
D Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV top control panel. Press V or v to select the desired menu 1 language, then press . The selected menu language appears. Select Confirm End Press V or v to select “Yes”, then pres
ページ6に含まれる内容の要旨
Setting up your TV (“Initial Setup”) (continued) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit Program Sorting/Edit is highlighted: Label, Skip, (block symbol). PROG Label Skip 01 Off Then press . 02 Off 03 Off 04 1) To label, press V or v to select the Off Edit mode alphanumeric characters for the label. Select Confirm Exit Then press . Program Sorting/Edit PROG Label Skip 2) To skip the program number, press V or v to 01 Off 0
ページ7に含まれる内容の要旨
E Connecting optional components Connecting to the video input terminal ( t ) Audio/Video cable (not supplied) TV front panel L 2 R Camcorder (MONO) L R Antenna cable (not supplied) TV, CATV, Satellite or When there is no FM signal Antenna selector FM signal TV rear panel TV signal 1 Antenna cable Y (not supplied) C B (MONO) L L (MONO) C R R R L R VCR Audio/ Video cable (not supplied) DVD player S Video cable (not supplied) Notes • If you connect a VCR to 8 (antenna input), preset the signal out
ページ8に含まれる内容の要旨
Connecting optional components (continued) Connecting to the monitor output terminal ( T ) TV rear panel 1 Y Audio system C B L (MONO) L L (MONO) R Audio/Video CR R R cable (not supplied) VCR Connecting to the component video input terminal ( ) TV rear panel 1 Component video Y cable (not supplied) CB L (MONO) Y (MONO) L CB C R CR R R L R DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecti
ページ9に含まれる内容の要旨
F Troubleshooting If you find any problem while viewing your TV, you can either use the “Factory Settings” function or check the Troubleshooting guide below. If the problem persists, contact your Sony dealer. “Factory Settings” function Press the WEGA GATE button. Choose “Settings” and go to “Setup” ( ) menu. From “Setup” menu, select “Factory Settings”. Then select “Yes” and press . Your TV will go blank for a few seconds, then the “Initial Setup” menu will appear. Your TV will be set to factor
ページ10に含まれる内容の要旨
Troubleshooting (continued) Symptom Solutions Picture slant • Keep external speakers or other electrical equipment away from the TV. • Display the “Setup” menu and adjust “Picture Rotation” so that the picture position is optimal (see ). N Abnormal color • Keep external speakers or other equipment away from the TV. Do not patches move the TV while the TV is turned on. Press ! (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. • Check the
ページ11に含まれる内容の要旨
G Using the remote control and basic functions 0 Button Description See 1 ?/1 Turn off temporarily or turn on – the TV. qa 1 2 a Display the TV program. – qs A/B 2 3 Jump to last program number – qd that has been watched for at 1 2 3 least five seconds. 4 5 6 4 PROG +/– Select program number. To select – qf quickly, press and hold until the 9 7 8 desired program number appears. 3 0 5 2 +/– Adjust volume. – PROG 4 8 Change the picture size: – qg “On” (16:9 wide-mode), “Off”. 5 qh 9 Select sur
ページ12に含まれる内容の要旨
Using the remote control and basic functions (continued) Button Description See WEGA GATE menu operations 6 Confirm selected items. I 7 WEGA GATE Display or cancel WEGA GATE menu. qj V, v, B, b Select and adjust items. qk RETURN Return to the previous level. Timer operations qg Set TV to turn on automatically according to the – desired period of time (max. of 12 hours). (Wake Up Timer) The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed fo
ページ13に含まれる内容の要旨
H TV top control, front and rear panels TV top control panel WEGA GATE FM PROG 0 9 8 7 6 TV rear panel 2 L (MONO) R 1 Y C B TV front panel (MONO) L L (MONO) 2 C R R R L (MONO) R qf qd qs qa 5 4 3 21 Button/Terminal Function See 1 ! Turn off or turn on the TV. C 2 Remote control sensor. - 3 Wake Up indicator. G 3 1 Standby indicator. C 4 i Headphone jack. - 5 t2Video input terminal 2. E 6 PROG +/– Select program number. - 7 2 +/– Adjust volume. - 8 t Select TV or video input. E WEGA GATE menu ope
ページ14に含まれる内容の要旨
I Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu. WEGA GATE TV TV 01 External Inputs 02 “TV” FM Radio 03 watch the preset TV Settings 04 channels (see D) 05 Select Confirm Select Confirm End External Inputs “External 1 Video 1 Inputs” 2 Video 2 select the inputs for the DVD connected equipment (see E) Select Confirm End FM Radio listen to the FM Radio Preset 1: “FM Radio” ---.--
ページ15に含まれる内容の要旨
J “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press . The following is an overview of the items that can be adjusted. Picture “Picture” (see K) Picture Mode: Vivid “Picture Mode”: “Vivid” “Standard” “Custom” Picture Adjustment Color Temperature: Cool “Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”, VM: High “Sharpness”, “Reset” Intell
ページ16に含まれる内容の要旨
K Changing the “Picture” setting The “Picture” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. 1 Make sure the “Picture” icon ( ) is selected, then press . 2 Press V or v to select the desired item (e.g., “Picture Mode”), then press . 3 Select To “Picture Mode” choose either “Vivid” (bright, contrast and sharp), “Standard” (normal) or “Custom”*. “Color Temperature” adjust white color tint. Choose either “Cool” (blue tint), “Neutral” (neutral tint) or “Warm” (red
ページ17に含まれる内容の要旨
Changing the “Picture” setting (continued) Adjusting the “Picture Adjustment” items under “Custom” mode Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, 1 “Hue” (color tones) or “Sharpness”, then press . Selecting “Reset” will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press . 2 Repeat the above steps to adjust other items. 3 The adjusted settings will be received when you select “Custom”. Notes • “Hue” can be
ページ18に含まれる内容の要旨
L Changing the “Sound” setting The “Sound” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. 1 Press V or v to select the “Sound” icon ( ), then press . 2 Press V or v to select the desired item (e.g., “Sound Mode”), then press . 3 Select To “Sound Mode” choose either “Dynamic” (low and high tones), “Standard” (voice and high tones) or “Custom”*. “Balance” Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. “Intelligent Volume”
ページ19に含まれる内容の要旨
M Changing the “Channel Setup” setting The “Channel Setup” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. 1 Press V or v to select the “Channel Setup” icon ( ), then press . 2 Press V or v to select the desired item (e.g., “Auto Program”), then press . 3 Select To “Auto Program” preset channels automatically. “Manual Program” manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually). “Program Sorting/Edi
ページ20に含まれる内容の要旨
Changing the “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program 1 number to which you want to preset a channel. (1) Make sure “Program” is selected, then press . (2) Press V or v until the program number you want to preset appears on the menu, then press . Select the desired channel. 2 (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) Press V or v until the desired channel’s broadcast appears on th
