ページ1に含まれる内容の要旨
36FS76 B5 U Cover.fm Page 1 Tuesday, May 7, 2002 4:40 PM
4-089-403-51
R
408940351
Trinitron Colour
Television
Operating Instructions
KV-36FS76 U
© 2002 Sony Corporation
ページ2に含まれる内容の要旨
36FS76 B5 U Cover.fm Page 2 Tuesday, May 7, 2002 4:40 PM NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP FUSE approved by ASTA or BSI to BS 1362 (i.e. marked ASA with T or ) must be used. When an alternative type of plug is used it should be fitted with a 13 AMP FUSE, otherwise the circuit should be protected by a 13 AMP FUSE at the di
ページ3に含まれる内容の要旨
36FS76 B5 Part 1 GB.fm Page 1 Tuesday, May 7, 2002 4:41 PM 1
ページ4に含まれる内容の要旨
36FS76 B5 Part 1 GB.fm Page 2 Tuesday, May 7, 2002 4:41 PM This set is to operate on a 220-240V AC For environmental and safety reasons, it is Never push objects of any kind into the set supply only. Take care not to connect too recommended that the TV set is not left in as this could result in a fire or electric shock. many appliances to the same power socket standby mode when not in use. Disconnect Never spill liquid of any kind on the set. If as this could result in fire or electric shock.
ページ5に含まれる内容の要旨
36FS76 B5 Part 1 GB.fm Page 3 Tuesday, May 7, 2002 4:41 PM Thank you for choosing this Sony Trinitron Television. Before operating this TV, please read this instruction manual thoroughly and retain it for future reference. Throughout this instruction manual there are illustrations of the remote control with certain buttons shaded white. 7 8 9 0 This shading indicates the buttons you will need to press when following the instructions. For example, the illustration on the right shows that th
ページ6に含まれる内容の要旨
36FS76 B5 Part 1 GB.fm Page 4 Tuesday, May 7, 2002 4:41 PM Follow steps 1 - 5 to install the TV and view programmes. Checking the supplied accessories 1 MODE 1 23 4 5 6 7 8 9 0 Batteries Remote control Inserting batteries into the remote control 2 Always remember to: • observe the correct polarity when inserting batteries, dispose of batteries in an environmentally friendly way. 4 Getting Started
ページ7に含まれる内容の要旨
36FS76 B5 Part 2 GB.fm Page 5 Tuesday, May 7, 2002 4:41 PM Connecting an aerial and VCR 3 Connecting an aerial only Connect your aerial lead to the aerial socket 1. labelled on the rear of the TV. Connecting an aerial and VCR Connect your aerial lead to the IN* socket on 1. your VCR. Connect an RF lead from the OUT* socket on 2. your VCR to the aerial socket labelled on the rear of the TV. Connect a fully wired 21-pin scart lead from the 3. s scart socket marked 3/ 3 on the rear of the TV
ページ8に含まれる内容の要旨
36FS76 B5 Part 2 GB.fm Page 6 Tuesday, May 7, 2002 4:41 PM Automatically tuning the TV 5 When you switch on the TV for the first time the Sony logo appears on the TV screen, 1. followed by the Language/Country menu with the word ‘English’ highlighted. Press the V or v buttons on the remote control to highlight your required language. Press the OK button to confirm your choice. From now on all menus appear in your chosen language. MODE The word ‘Country’ is now highlighted. Press the V or v bu
ページ9に含まれる内容の要旨
36FS76 B5 Part 2 GB.fm Page 7 Tuesday, May 7, 2002 4:41 PM Overview of the remote control 1 Mute button qd REC button Press to mute the TV sound. Press again to When b MODE B Selector button is set to 123 restore the sound. VCR, press this button to begin recording. 2 VIDEO Standby button qf Volume buttons Press to switch off your VCR or DVD Press to increase (+) or decrease (-) the temporarily. volume. 4 MODE 3 TV Standby button qg EPG button 5 qh Press to switch off your TV temporarily. The
ページ10に含まれる内容の要旨
36FS76 B5 Part 2 GB.fm Page 8 Tuesday, May 7, 2002 4:41 PM Overview of the TV buttons Video input button Press to select signals from equipment connected to the TV sockets (refer to ‘Connecting other equipment to the TV’ for details). Volume buttons Press to increase (+) or decrease (-) the volume. Programme buttons Press to display the next (+) or previous (-) channel. Auto Start up button Press and hold for approximately 2 seconds to start the auto start up sequence. 8 Basic Operation
ページ11に含まれる内容の要旨
36FS76 B5 Part 3 GB.fm Page 9 Tuesday, May 7, 2002 4:42 PM Text Most TV channels provide a Text service. Please ensure you are receiving a good signal or some Text errors may occur. Viewing Text Select the TV channel which carries the Text service you want to view. 1. Press the button on the remote control to enter Picture and Text (P&T) mode. The MODE 2. screen is divided in two with the Text display on the left and the TV channel in the right corner. Note: In P&T mode press the button fol
ページ12に含まれる内容の要旨
36FS76 B5 Part 3 GB.fm Page 10 Tuesday, May 7, 2002 4:42 PM Teletext menu The ‘Teletext’ menu gives you access to more Text features. Select the TV channel which carries the Text service you want to view. 1. Press the button on the remote control to enter Text mode. 2. MODE With Text displayed on the TV screen, press the MENU button to display the ‘Teletext’ 3. menu on the TV screen. 1 23 4 5 6 7 8 9 0 Press the V or v buttons to highlight the feature you require. Press the b button to sele
ページ13に含まれる内容の要旨
36FS76 B5 Part 3 GB.fm Page 11 Tuesday, May 7, 2002 4:42 PM Multi Picture In Picture ( Multi PIP) This feature displays 13 different channels simultaneously on screen. From this display you can select which channel you wish to view. 7 8 9 Press the button to enter Multi PIP mode. 1. 0 04 02 03 04 05 04 02 03 04 05 01 13 06 01 13 06 12 12 07 12 12 07 11 10 09 09 08 09 11 10 09 08 Press the PROG +/- buttons repeatedly to select the next or preceding 12 channels. 2. Press the V, v, B, or b butt
ページ14に含まれる内容の要旨
36FS76 B5 Part 3 GB.fm Page 12 Tuesday, May 7, 2002 4:42 PM Screen Mode The pictures that the TV receives may be in one of several formats (e.g. conventional 4:3 format, 16:9 widescreen format). You can alter the TV screen mode manually to suit the broadcast you are watching*. 7 8 9 Press the button on the remote control to display the Screen Mode menu on the TV 1. 0 screen. Press the button repeatedly (or use the V and v buttons) to select one of the following 2. modes. Press the OK butto
ページ15に含まれる内容の要旨
36FS76 B5 Part 4 GB.fm Page 13 Tuesday, May 7, 2002 4:42 PM NexTView Electronic Programme Guide (EPG) The NexTView Electronic Programme Guide (EPG) provides you with programming information from different broadcasters, depending on availability of service. Selecting your NexTView provider Your TV automatically selects the best NexTView provider for you. This service is available about 30 minutes after you automatically tune the TV. You can however change this selection if you wish. 7 8 9 0 P
ページ16に含まれる内容の要旨
36FS76 B5 Part 4 GB.fm Page 14 Tuesday, May 7, 2002 4:42 PM Using the ‘Individual Setting’ menu You can set this menu so that only the programme types you wish to view are displayed in the programme list column. 7 8 9 Select the icon in the NexTView menu. Press the b button to display the ‘Individual 0 1. Setting’ menu. Press the V or v buttons to select the programme type you require. Press the OK button 2. to confirm your choice. Repeat Step 2 for all the programme types you wish to have i
ページ17に含まれる内容の要旨
36FS76 B5 Part 4 GB.fm Page 15 Tuesday, May 7, 2002 4:42 PM Using the TV menu system This TV contains a menu system which is based on a series of on screen displays. These displays help you get the most from your TV, from customising the picture and sound to accessing advanced features. Use the following buttons on the remote control to operate the TV menu system: 8 7 9 Press the MENU button to display the main menu. 1. 0 Use the following buttons to operate the menu: 2. - Press the v or V bu
ページ18に含まれる内容の要旨
36FS76 B5 Part 4 GB.fm Page 16 Tuesday, May 7, 2002 4:42 PM Sound Adjustment menu This menu allows you to customise the sound. Highlight the required option and press b to select. The table below explains each option and how to use it. MODE 1 23 Option How to use 4 5 6 7 8 9 Sound Effect This option allows you to select one of four sound Press V or v to select Personal, Dolby V*, Dynamic** or 0 modes. Natural**. Press OK to confirm. Equaliser Adjustment This option allows you to customise the
ページ19に含まれる内容の要旨
36FS76 B5 Part 5 GB.fm Page 17 Tuesday, May 7, 2002 4:43 PM Features menu This menu allows you to set the sleep timer and set the signal to be output from the AV3 socket. The table below explains each option and how to use it: Option How to use Auto Format 7 8 9 This option can automatically detect the type of screen Press V or v to select Off or On. Press OK to confirm. 0 format being received. The settings available are: Off: Screen Mode remains constant. On: Screen Mode automatically chang
ページ20に含まれる内容の要旨
36FS76 B5 Part 5 GB.fm Page 18 Tuesday, May 7, 2002 4:43 PM With the ‘AV Preset’ option highlighted, press b to enter the ‘AV Preset’ menu. Press v or V to highlight the socket you wish to name. Press b to select the AUTO FORMAT column. Press v or V to select ‘Off’ or ‘On’. (For more details on ‘Auto Format’, refer to ‘Features menu’.) Press b to select the LABEL column. Press v or V to select the first character. Press b to confirm this character. Select the other characters in the same way
