ページ1に含まれる内容の要旨
Operating Instructions
(For Basic Operations)
Digital Imaging Systems
Model No. DP-8060 / 8045 / 8035
Before operating this machine, please carefully read this manual, and keep this
English
documentation in a safe place for future reference.
(Illustration shows optional accessories that may not be installed on your machine.)
Replacing Facsimile / Network Product
Appendix Problem Solving Printing Copying
Consumables Internet Fax/Email Scanning Overview
ページ2に含まれる内容の要旨
Product Overview Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals in a safe place for future reference. If you lose a manual, contact an authorized Panasonic dealer. Operating Instructions (For Setting Up) This manual contains essential information for setting up the machine. Operating Instructions Accessories (For Basic Operations) This manual contains essential information for proper o
ページ3に含まれる内容の要旨
Memo 3 Product Overview
ページ4に含まれる内容の要旨
Product Overview Table of Contents Product Overview Network Scanning ■ Operating Instructions .................................. 2 ■ Safety Information ....................................... 6 ■ Network Scanner .......................................... 25 ■ Precautions.................................................. 9 ● Start up the Communications Utility ......... 25 ■ Security Suggestions for Key Operators ...... 12 ● Scanning the Document to Your PC .......... 26 ■ Outer/Inner View ......
ページ5に含まれる内容の要旨
Problem Solving Appendix ■ Troubleshooting ............................................ 38 ■ Specifications .............................................. 65 ● Machine Care ........................................... 39 ● DP-8060/8045/8035 (Copier) ..................... 65 ■ User (U) / Error Codes.................................. 40 ● i-ADF (Standard)....................................... 66 ● User Error Codes (U Codes) ..................... 40 ● Printer Unit ..................................
ページ6に含まれる内容の要旨
Product Overview Safety Information For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-8060/8045/8035 to ensure proper, and safe operation of your machine. ■ This section explains the Warnings and Cautions used in this Operating Instructions manual. WARNING Denotes a potential hazard that could result in serious injury, or death. CAUTION Denotes hazards that could result in minor injury, or damage to the machine. ■ This section
ページ7に含まれる内容の要旨
Never open or remove machine covers that Operating Safeguards are secured with screws unless specifically instructed in the “Operating Instructions”. A high- Do not touch areas where these caution labels voltage component can cause electric shocks. are attached to, the surface may be very hot and may cause severe burns. Do not try to alter the machine configuration or modify any parts. An unauthorized modification Do not place any liquid container such as a can cause smoke or fire. vase or coffe
ページ8に含まれる内容の要旨
Product Overview Safety Information For Your Safety CAUTION Consumable Safeguards Others ■ The machine has a built-in circuit for protection against Never heat the drum cartridge, or scratch its lightning-induced surge current. If lightning strikes in surface. A heated or scratched drum can be your neighborhood, maintain ample distance from the hazardous to your health. machine, and do not touch the machine until the lightning has stopped. ■ If you notice flickering or distorted images or noises
ページ9に含まれる内容の要旨
Precautions Precautions ■■■■■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. ■■■■■ Caution Label Complies with FDA radiation performance standards, 21 CFR Subchapter J Manufacturer's Name and Address Factory ID (For DP-8060/8045) (For DP-8035) 9 Product
ページ10に含まれる内容の要旨
Product Overview Precautions For Your Safety Illegal Copies ■ The maximum power consumption is 1.45 kW. It is unlawful to make copies of certain documents. A properly wired (grounded), dedicated, 15 A, 120 V Copying certain documents may be illegal in your country. AC outlet is required. Do not use an extension cord. Penalties of fines and/or imprisonment may be imposed The power cord on this machine must be used to on those found guilty. The following are examples of items disconnect the main p
ページ11に含まれる内容の要旨
■ Maximum Copies Limitation Ventilation After setting the maximum allowed number of copies for each department, consult with your Key Operator ■ The machine should be installed in a well-ventilated when the total copy count reaches the designated limit area to minimize the ozone density in the air. and the “DEPT.MAXIMUM COPIES HAS BEEN REACHED” message appears on the LCD. Handling ■ Do not turn the Power Switch Off, or open the Front ■ Power Switch Cover during copying/printing. If you are not g
ページ12に含まれる内容の要旨
Product Overview Security Suggestions for Key Operators To maintain your machine’s highly-sensitive document The security settings on this equipment are restricted, ∗ data secure from unauthorized users, machine access and requires the input of an 8-digit Key Operator must be restricted, managed, and controlled from the password to set, or change them. The initial password initial machine installation, network connection, network setting is 00000000 (8-digit). The password can be set configurati
ページ13に含まれる内容の要旨
Memo 13 Product Overview
ページ14に含まれる内容の要旨
Product Overview Outer/Inner View ADF (Automatic Document Feeder) Control Panel Sheet Bypass Front Cover Right Cover Paper Tray 1 Right Lower Cover Manual Pocket Paper Tray 2 Store the Operating Toner Instructions in the Bottle Manual Pocket for Paper Tray 3 future reference. (Optional System Fuser Knob Console) (Green) Paper Transport Knob (Green) Paper Tray 4 Transport Release Lever (Green) (Optional System Left Cover Console) (Optional System Console) Exit Cover ● Power Switches ●Interface Po
ページ15に含まれる内容の要旨
Control Panel 1 2 3 4 5 6 7 8 13 12 11 10 9 Keypad Original Copy Size Touch Panel Start Size Keys Keys Display Key No. Icon Contents No. Icon Contents Copy Key Reset Key 1 6 To use the unit as a photocopier. Resets all features to the initial power- on state. Clear Key Fax/Email Key 7 Clears the copy quantities, etc. To use the Facsimile/Internet Fax/Email function. Stop Key 8 Scan/File Key Stops the Copy/Facsimile/Scan job run. To use the Scan/File function. Fax (Option) Function Keys Print Key
ページ16に含まれる内容の要旨
Product Overview Touch Panel Display Touch Panel Display ● The above image shows everything is lit at the same time. This is for illustration purposes only, the machine will never have all icons, lit, or flashing at the same time. Refer to pages 17 to 20 for details of each function's image. When the Department Counter function is set up, the departmental Identification Code input screen is displayed on the Touch Panel Display. A registered departmental Identification Code (Max 8-digits) is requ
ページ17に含まれる内容の要旨
Copy Function Job Status Indicator Ex.: Copying 3 sets. The Indicator displays the progress of a job task as follows: 0/3 → 1/3 → 2/3 → 3/3 6 7 14 1 2 3 4 5 8 9 10 11 12 13 22 15 23 16 24 17 25 26 21 20 19 18 ●The above image shows everything is lit at the same time. This is for illustration purposes only, the machine will never have all icons, lit, or flashing at the same time. Refer to pages 17 to 20 for details of each function's image. ■■■ Touch Panel Display Indications ■■ Contents Contents
ページ18に含まれる内容の要旨
Product Overview Touch Panel Display Fax (Option)/Internet Fax/Email Functions 1 2 3 4 5 11 6 7 12 8 9 10 ■■■ Touch Panel Display Indications ■■ No. Contents No. Contents 1 File type and Transmit type SEARCH Button 7 Searches the Local/Global Directory. Resolution EMAIL HEADER Button 2 8 Your machine is preset to Fine resolution, which is Set the address of CC/BCC/FROM. suitable for most documents. Use Fine or Super Fine for detailed documents. Original DESTINATIONS Button 3 9 Shows the type of
ページ19に含まれる内容の要旨
Scan/File Functions 4 1 2 3 5 9 8 6 7 ■■■ Touch Panel Display Indications ■■ No. Contents No. Contents 1 5 File Type MODE SETTING Button Displays the scanning file type (TIFF or PDF). More setting can be configured by pressing the MODE SETTING Button. Resolution DD SAVE/DD RETRIEVE Buttons 2 6 Your machine is preset to 300dpi resolution, which Optional DD Server Software (DA-WS20) is required. is suitable for most documents. For more details, refer to the Operating Instructions (For DD Server).
ページ20に含まれる内容の要旨
Product Overview Touch Panel Display Print Function 1 2 3 4 5 6 ■■■ Touch Panel Display Indications ■■ No. Contents No. Contents 1 MAIL BOX Tab ON LINE Button 4 Allows you to use the Security Print function to start Allows you to return your printer ON LINE after the printing job. taking it OFF LINE with the OFF LINE Button. JOB CONTROL Tab CANCEL PRINT Button 2 5 Allows you to select OFF LINE, ON LINE, Allows you to cancel a print job before the printing CANCEL PRINT, JOB QUEUE functions. has s
