ページ1に含まれる内容の要旨
2-548-137-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
RU
Инструкция по эксплуатации
• Перед работой с устройством внимательно прочтайте инструкцию
и сохраните её для дальнейшего использования.
KV-SR29
M99K
© 2004 Sony Corporation
ページ2に含まれる内容の要旨
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
ページ3に含まれる内容の要旨
To prevent fire or shock hazard, do not expose the Do not plug in too many appliances to the same TV to rain or moisture. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) Install the TV on a stable TV stand and floor which as long as the power cord is plugged in. Unplug can support the TV set weight. Ensure that the TV the TV before moving it or i
ページ4に含まれる内容の要旨
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. or (1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Securely fix the
ページ5に含まれる内容の要旨
Table of Contents Menu Adjustment Installation Getting Started ..................................... 6 Introducing the menu system .......... 18 Setting up your TV Changing the “Picture” setting ........ 21 (“Initial Setup”) .................................... 7 Changing the “Sound” setting ......... 23 Changing the Picture-in-Picture Overview of Controls (“PIP”) setting .................................... 25 Changing the “Channel Setup” TV front and rear panels ..................... 9 setting
ページ6に含まれる内容の要旨
b b Installation x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 30). Step 3 Plug in the power cord, then press ! on the TV to turn it on. Note • The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not
ページ7に含まれる内容の要旨
Installation x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, change the order of TV channels that appear on the screen and adjust the picture position using the buttons on the TV front panel. Tip • The MENU, and V/v/B/b buttons on the remote control can also be used for the operations below. Press 2 +/– to select the desired me
ページ8に含まれる内容の要旨
continued Program Sorting The selected channel will appear on Program: the screen. 01 01 02 03 2) Press 2+/– to select the new 04 program number position for your Select new position selected channel, then press t. 3) Repeat steps b) 1) and 2) if you wish to change the order of the other channels. c) Press MENU to go to the next menu. Press 2 +/– to adjust the bars on the top 4 and bottom of the menu if they are slanted, then press t. “Picture V-Position” menu appears. If the upper and lower bar
ページ9に含まれる内容の要旨
Overview of Controls Overview of Controls x TV front and rear panels TV rear panel qs RL Y CB CR qh 12 3 qg qf qd TV front panel qa 9 8 76 5 4 0 3 2 1 AUTO PROG:Press [MENU] for 5sec MIC L(MONO) R MENU SOUND (AUTO PROG) PROG MODE 4 Button/Terminal Function Page 1 ! Turn off or turn on the TV. 6 2 1 Standby indicator. 6 2 Wake Up indicator. 11 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. 30 Menu operations 5 2 +/– Select and
ページ10に含まれる内容の要旨
PROG x Using the remote control and basic functions 1 VIDEO Button Description Page qj 1 ?/1 Turn off temporarily or turn – 2 qk on the TV. DVD 3 ql PARTY 3 a Display the TV program. – MODE 4 w; 4 t Select video input. 30 A/B 5 wa 0 Change the picture size: – 6 MENU “On” (16:9 wide-mode), “Off”. 7 qs Select surround mode options: – “TruSurround” (surround sound that spreads out to the rear of a 8 wf room), “WOW” (full, deep bass sound), “Simulated” (stereo-like wg 9 monaural sound), “Off”. wh 0
ページ11に含まれる内容の要旨
Overview of Controls Button Description Page Set TV to turn on automatically according to the – qh desired period of time (max. of 12 hours). (Wake Up Timer) The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Teletext operations (green label) 4 Stop Teletext from scrolling. 16 5 Enlarge the Teletext display. 16 9 Display T
ページ12に含まれる内容の要旨
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. VIDEO Selecting the picture mode Press to select the desired picture mode. DVD PARTY MODE Select To view A/B “Dynamic” high contrast pictures. MENU “Standard” normal pictures. “Soft” mild pictures. “Personal” the last adjusted picture setting from the “Picture Adjustment” option in the menu (see page 22). 1 2 3 4 5 6 7 8 9 0 Selec
ページ13に含まれる内容の要旨
x Watching Picture-in-Picture (PIP) With the PIP feature, you can display two different TV programs or video input at the same time by using the button. VIDEO To Press DVD Display a sub screen . PARTY To cancel the sub screen, press MODE the button again. A/B Change a program number MENU PIP PROG + or in the sub screen PIP PROG –. PIP PROG +/ Adjust position of sub screen . PIP PROG – . Swap pictures between the main and sub screens Swap sound between the . 1 2 3 main and sub screens 4 5 6 7 8
ページ14に含まれる内容の要旨
x Enjoying the Party Mode You can sing along with any music program of TV broadcast or with any audio/ video equipment or create visual presentations (e.g. photos or video stories) with narration and favorite background music by using the Party Mode feature. VIDEO DVD PARTY MODE PARTY A/B MODE MENU TV front panel MIC L(MONO) R 4 1 2 3 Select the input connected to your audio/video equipment (see pages 1 30 – 32). Connect the microphone (not supplied) to the microphone input terminal 2 and switch
ページ15に含まれる内容の要旨
PROG x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program VIDEO Broadcasting On-screen display (Selected sound) DVD PARTY MODE NICAM Mono NICAM t A/B stereo (Regular sound) (Stereo sound) MENU A/B NICAM NICAM Main NICAM Sub Mono tt (Main sound) (Sub sound) (Regular sound) bilingual Mono NICAM NICAM Main t (Regular sound) 1 2 3 (Main sound) monaural 4 5 6 7 8 9 0 When receivi
ページ16に含まれる内容の要旨
PROG x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. VIDEO To Do this DVD display a Teletext Press . Each time you press , the PARTY MODE page on the screen changes as follows: A/B TV picture Teletext t Teletext and TV t TV. MENU If there is no Teletext broadcast, “100” is displayed at the top left corner of the sc
ページ17に含まれる内容の要旨
x Operating optional components You can use the supplied remote to operate Sony audio/video equipment. Setting up the remote to work with other connected equipment While keeping VIDEO ?/1 For example, to operate a pressed, press the corresponding Sony 8 mm VCR: number button for the desired VIDEO equipment (see the chart below). 8 + To control Hold down VIDEO ?/1 and press Audio System 1, 1x, 2 or 3 0, 1, 2, or 3 DVD 1, 2 or 3 4, 5 or 6 VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9 Operating
ページ18に含まれる内容の要旨
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language: English PIP icon Picture Position Menu level 3 Channel Setup icon Party Mode Setup Wide Mode: Setup icon Video Label Color System: Menu level 2 Menu level 1 Select Confirm End User Guidance Level 2 Level 1 Level 3/Function Page “Mode” 21 “Picture” Select
ページ19に含まれる内容の要旨
Level 1 Level 2 Level 3/Function Page 25 “PIP” “PIP” Display a sub screen within the main picture: “On” t “Off” Exchange pictures between main screen and sub “Swap” screen. “Position” Change the position of the sub screen “Channel Setup” Preset channels automatically. 26 “Auto Program” Preset channels manually. “Manual Program” “Program Label” Label the program number. “Program Block” Block unwanted programs. “Program Sorting” Change the order in which the channels appear on the screen. Change t
ページ20に含まれる内容の要旨
PROG continued How to use the menu MENU Picture Press MENU to Mode: Dynamic Picture Adjustment display the menu. Color Temperature: Cool 3D Intelligent Picture: On Select Confirm End 1 2 3 Press V or v to select Channel Setup 4 5 6 the desired item. Auto Program 7 9 Manual Program 8 Program Label Program Block 0 Program Sorting End Select Confirm OPTION RESET Channel Setup Press (or b) to Auto Program Manual Program confirm your Program Label selection and Program Block TV Program Sorting go to
