ページ1に含まれる内容の要旨
Digital Imaging Systems
Operating Instructions
(For Copier & Network Scanner)
Model No. DP-3510/4510/6010
J
?
I
Before operating this equipment, please read the instructions completely and keep these operating instructions
for future reference.
English
P001_4510(pb).p65 1 7/31/02, 10:44 AM
Getting To Know
Others Network Scanner Options Making Copies Before Starting
Your Machine
ページ2に含まれる内容の要旨
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No. Serial No. Date of Purchase Dealer Address Telephone Number () Supplies Telephone Number () Service Telephone Number () Model and Serial Number Copyright 2002 by Matsus
ページ3に含まれる内容の要旨
Useful Office Functions Copier 1 Copy up to A3 size. Capable of copying text/photos/halftone originals. Network Printer 2 Digital printer controller standard, printer resolution 300 or 600 dpi. Network Scanner 3 Black & White original scanner can be used when optional Network Scanner Kit (DA-NS600) is installed. Scanning resolution up to 600 dpi. Application Software 4 Document Manager Document Viewer Document Network Scanner* Utilities (Network Status Monitor, Phone Book Editor, Device Configur
ページ4に含まれる内容の要旨
Operation Chart Common Features and Usage Basic Operation Turn the main Power Switch On Original (Located on the back of the Copier) B4·FLS Load Paper 1 2 3 4 5 Press the COPY SIZE Number Press Turn the Power Place the Original(s) COPY Key (Reduction/ of Copies START Switch On (Up to 70/i-ADF) Enlargement Only) Position of the Original From i-ADF From Platen Original Guide C Place originals face down on the platen or face up on the i-ADF. C If the original is not positioned properly
ページ5に含まれる内容の要旨
Operation Chart Touch Panel Display Function Categories Tab Name Features See Page C Initial “Ready to copy” screen. C Original Mode, Exposure Control and Paper Tray A BASIC MENU 16-26 selection. C Job selection (Tandem/Remote, Proof Set and etc.). C Reserved Job(s) verification. 2-SIDED/ORIG. \ C 2-Sided, 2 Page, Booklet Copy Mode, Multi-Size 27 B COPY Feed and/or SADF function selection. C Electrical Sort Mode and/or optional Finisher C SORT/FINISH 37, 84, 89, 94 selection. C Zoom Copy
ページ6に含まれる内容の要旨
Energy Star ® As an ENERGY STAR Partner, Panasonic has determined that this product meets the ® ENERGY STAR guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified period of non-use. The use of this ® ENERGY STAR compliant product will reduce energy consumption and ultimately benefit the environment. The default functions can be adjusted depending on your office requirements.
ページ7に含まれる内容の要旨
Table of Contents Getting To Know Your Machine Operation Chart .............................................................................................................................. 4 Common Features and Usage ..............................................................4 Touch Panel Display .............................................................................5 Before Starting Precautions .......................................................................................
ページ8に含まれる内容の要旨
Table of Contents Making Copies Other Features .............................................................................................................................. 55 Concurrent Copying ............................................................................ 55 Energy Saver/Interrupt ........................................................................ 56 Skyshot Mode..................................................................................... 57 Combined Function
ページ9に含まれる内容の要旨
Precautions For Your Safety Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Caution Labels 9 P009_4510(pb).p65 9 7/31/02, 10:44 AM Before Starting
ページ10に含まれる内容の要旨
Precautions Handling Do not look directly at the exposure lamp when copying. Do not turn the power switches Off or open the front panel during copying. C Do not drop paper clips or other metal objects into the copier. Toner and Paper Store toner, drum and paper in cool areas with low humidity. 2 C Use high quality 60 - 90 g/m (Sheet Bypass: 2 55 - 133 g/m ) paper. C For optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier. Ventilation The copie
ページ11に含まれる内容の要旨
Precautions Installation The copier should not be installed in areas with the following conditions: C Extremely high or low temperature and humidity. Ambient conditions Temperature: 10 – 30°C Relative humidity: 30 – 80 % C Where temperature and humidity can change rapidly, causing condensation. C Direct exposure to sunlight. C Directly in the air conditioning flow. C In areas of high dust concentration. C In areas of poor ventilation. C In areas with chemical fume concentration. C In areas wit
ページ12に含まれる内容の要旨
Precautions Installation For U.K. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark 7 or the BSI mark 6 on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you
ページ13に含まれる内容の要旨
Control Panel ∗ B4·FLS Touch Panel Display ORIGINAL COPY SIZE Touch Panel Keypad START SIZE Keys Keys Display Key No. Contents COPY Key # C Press when using the unit as a photocopier. ENERGY SAVER Key $ C Can save power while the copier is not in use. INTERRUPT Key % C Interrupts other copy or print jobs while making copies. FUNCTION Key & C Use when changing the paper size, initial values for functions (default values) and key operator settings. RESET Key ( C Resets all features to the initial
ページ14に含まれる内容の要旨
Control Panel Touch Panel Display B4·FLS Touch Panel Display C Use only soft finger pressure to activate the Touch Panel Display. DO NOT ATTENTION USE SHARP OBJECTS such as pens, fingernails etc., as this may damage the panel. 14 P014-015_4510(pb).p65 14 7/31/02, 10:44 AM
ページ15に含まれる内容の要旨
Control Panel Touch Panel Display Indications No. Contents See Page Warning Indications -- # ?: Add Toner k: Add Paper 2: Call Service B: Waste Toner (Call Service) $ Original Icon -- % Original Size Indication 16 35 & SADF/Multi-Size Feed Mode Indication -- ( Rotate Mode Indication -- ) Number of Copies 120 * Machine / User Error Code Indication (E1-01, U13, etc.) -- + Copy Icon - Copy Size Indication 16 . Reserve a Job Button 55 37 / Finisher Functions Indication -- 0 Machine Outline with T
ページ16に含まれる内容の要旨
Basic Menu Full Size Copying Copying the Same Size Originals (1:1) Copy size is automatically selected. B4·FLS ORIGINAL SIZE Keys Touch Panel Display 1 2 3 Number of Copies Place the Press START (Up to 999) Original(s) Initial Screen (When placing A4 size originals) Manual Exposure Select buttons (LIGHTER and DARKER) Original Mode Select button (TEXT; TEXT/PHOTO; PHOTO) JOB SETTINGS button C Each setting selected will be indicated on the display. Manually Selecting Exposure C
ページ17に含まれる内容の要旨
Basic Menu Notice for i-ADF Inappropriate Originals CPaste-ups C Paper with a smooth surface such as glossy CPressure sensitive or carbon backed papers and coated papers CPaper with excessive curl CTransparencies C Stapled originals C Originals with a Lead Edge that is “creased”, CFreshly printed copies from a laser printer “folded”, “punched” or “glued” When copying the thick Booklet, open the ADF and check the ADF Hinge is returned to original angle if ADF rear side is lifted up. 1 2
ページ18に含まれる内容の要旨
Basic Menu Reduction or Enlargement Copying Copying with Preset Ratios B4·FLS 1 2 3 4 Place the Select the Number of Press START Original(s) Copies COPY SIZE Example: Reduction ORIGINAL SIZE COPY SIZE A3 A4 The correct ratio is automatically selected. Reduction and enlargement ratios (%) COPY SIZE ORIGINAL SIZE A3 B4 A4 R A5 A3 100 87 71 50 115 100 82 58 B4 A4 R 141 122 100 71 A5 200 173 141 100 C When changing the paper size, touch the PAPER TRAY button. C If the desired copy size is dif
ページ19に含まれる内容の要旨
Basic Menu Proof Copying Proof Copying Allows you to make one proof set, before proceeding to copy a large multi-set with various settings. B4·FLS ( ) 1 2 4 3 5 Place the COPY SIZE Set function and Proof Number Press Original(s) (Reduction/ of Copies START Copying (Up to 70) Enlargement Only) # Place the Originals on the ADF, adjust the settings to your needs, select the number of copies desired. $Set PROOF SET button. %Press START, then one Proof Copy is made. C If the Proof Copy is OK,
ページ20に含まれる内容の要旨
Basic Menu Tandem/Remote Copying (Required installation of optional Hard Disk Drive/DA-HD60, network setup(See page 65)and registration of parameter of the user machine(See page 21).) C 50 % of the total copying set(s) are split between other copiers on the network. (Tandem Copying) C All of the copying sets will be printed on other copiers in the network. (Remote Copying) B4·FLS ( ) 1 2 4 3 5 COPY SIZE Place the Set Tandem/Remote Number Press (Reduction/ Original(s) of Copies START Copyi
