ページ1に含まれる内容の要旨
Connecting Additional Equipment
4-101-456-22(1)
Operating Instructions
KV-27FS120
© 2005 by Sony Corporation
KV-27FS120
4-101-456-22(1)
ページ2に含まれる内容の要旨
User Guide KV-27FS120 4-101-456-22(1)
ページ3に含まれる内容の要旨
Connecting Additional Equipment WARNING ✍ Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved To reduce the risk of fire or electric shock, do not expose the in this manual could void your authority to operate TV to rain or moisture. this equipment. NOTIFICATION CAUTION RISK OF ELECTRIC SHOCK This equipment has been tested and found to comply with DO NOT OPEN the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. T
ページ4に含まれる内容の要旨
User Guide IMPORTANT SAFEGUARDS For your protection, please read these instructions Corrosion completely, and keep this manual for future reference. Use of this TV near the seashore may subject the set to Carefully observe and comply with all warnings, cautions excessive salt, corrosion and internal damage and result in and instructions placed on the set, or described in the deterioration of the TV’s performance. If the set will be operating instructions or service manual. subjected to t
ページ5に含まれる内容の要旨
Connecting Additional Equipment Never cover the slots and openings Service with a cloth or other materials. Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: Never block the slots and openings When the power cord or plug by placing the set on a bed, sofa, rug or other similar surface. is damaged or frayed. If liquid has been spilled Never place the set in a confined into the set or obj
ページ6に含まれる内容の要旨
User Guide KV-27FS120 4-101-456-22(1)
ページ7に含まれる内容の要旨
Contents Introduction ® Introducing the FD Trinitron WEGA Features ........................................................................ 1 About this Manual.......................................................................................................................... 2 Batteries for the Remote Control .................................................................................................. 2 Front Panel Menu Controls ........................................................
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Introduction ® Congratulations on your purchase of the Sony FD Trinitron WEGA . ® Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ FD Trinitron Flat CRT — Delivers a picture with uncompromising accuracy and outstanding image detail via a technologically advanced tube. ❏ YPBPR Inputs — Provides component video inputs for superior picture quality (480i only). ❏ BBE — Gives sound more impact by using audio technology to compensate for phase effects in s
ページ10に含まれる内容の要旨
About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once your TV is connected, follow the instructions and use the remote control to access the on-screen menus. Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ Under normal conditions, batteries wil
ページ11に含まれる内容の要旨
Remote Control Using the Remote Control Remote Control Description 0 MUTING DISPLAY POWER 1 2 MTS/SAP TV/VIDEO qz 3 1 2 3 4 5 6 qs 9 7 8 JUMP ENT 0 4 VOL CH PICTURE MODE 5 qd 6 MENU 7 qf 8 RESET SLEEP 9 qg TV RM-Y194 3 KV-27FS120 4-101-456-22(1)
ページ12に含まれる内容の要旨
Remote Control Description Button Description VOL 1 MUTING Instantly turns off the sound. Press again or press to restore the sound. + 2 DISPLAY Press to display the current time (if set) and channel number. Press again to turn DISPLAY off. 3 MTS/SAP Cycles through the Multi-channel TV Sound (MTS) options: Stereo, Mono, and Auto SAP (Second Audio Program). 4 JUMP Press to jump back and forth between two channels. The TV alternates between current channel and the last channel that was select
ページ13に含まれる内容の要旨
Connections Connecting Your TV Read this section before setting up your TV for the first time. This section explains how to make the basic connections and how to connect optional equipment. TV Rear Panel AUDIO OUT (VAR/FIX) 1 3 4 Y S VIDEO P B 1 P R VIDEO L L L (MONO) (MONO) R R R 23 45 Jack Description 1 VHF/UHF This input connects to your VHF/UHF antenna or cable. 2 S VIDEO This input connects to the S VIDEO OUT jack on your VCR or other video equipment that has S VIDEO. S VIDEO provides b
ページ14に含まれる内容の要旨
Basic Connections TV with Cable, Indoor, or Outdoor Antenna Depending on the cable system available in your home, choose one of the connections below: Use this to connect the TV to a cable system or an antenna with a 75-ohm cable. Use this to connect the TV to a dipole antenna, also known as a “rabbit ears” antenna. ✍ If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for the best reception. 6 KV-27FS120 4-101-456-22(1) Connections
ページ15に含まれる内容の要旨
Connections Connecting Additional Equipment Connecting a TV and VCR Rear of TV AUDIO OUT (VAR/FIX) 1 3 4 Y S VIDEO P B 2 P R VIDEO L L L VCR (MONO) (MONO) R R R LINE IN VIDEO AUDIO L AUDIO R 1 LINE OUT Video (yellow) Audio L (white) From Audio R (red) cable/antenna Optional connection 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Optional connect
ページ16に含まれる内容の要旨
TV and Cable Box Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to such type of service, use this connection. Cable box 1 VIDEO AUDIO L AUDIO R LINE OUT From cable/ antenna Rear of TV 1 3 S VIDEO P 2 P VIDEO L (MONO) R 1 Connect the coaxial cable from your cable service to the IN jack on your cable box. 2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV. Optional co
ページ17に含まれる内容の要旨
Connections Connecting a TV, VCR, and Cable Box ✍ DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bi- directional splitter (5-900 Mhz mininum) that is designed to work with your digital cable box. Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to: ❏ change channels through your cable box or VCR when you are receiving a scrambled signal ❏ change channels th
ページ18に含まれる内容の要旨
Optional connection ❏ If your VCR is equipped with video outputs, you can get better picture quality by connecting Audio/Video cables (not supplied) from Audio and Video OUT on your VCR to Audio/Video IN on your TV. ❏ For better picture quality, use S VIDEO (located on the rear panel), instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. TV/VIDEO ✍ You can use the button to switch between the VHF/UHF and VIDEO inputs. 10 KV-27FS120 4-
ページ19に含まれる内容の要旨
Connections Connecting a TV and Satellite Receiver From cable/ antenna Rear of TV AUDIO OUT 2 (VAR/FIX) 1 3 4 S VIDEO Y P B P R Satellite receiver VIDEO L L L 1 VIDEO 1 VIDEO 2 VIDEO 1 VIDEO 2 (MONO) (MONO) Y R R R PB L L R P Satellite R R antenna Audio R (red) cable Audio L (white) Video (yellow) 3 1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. 3 Using aud
ページ20に含まれる内容の要旨
Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver using Composite Video (VIDEO/AUDIO L(MONO), R) From 2 Optional cable or Rear of TV antenna Satellite antenna AUDIO OUT (VAR/FIX) cable 1 3 4 Splitter S VIDEO Y 1 P B P R 3a 3b For Viewing VIDEO Satellite receiver L L L (MONO) (MONO) VIDEO 1 VIDEO 2 VIDEO 1 VIDEO 2 Y R R R PB L L R P R R Video (yellow) Audio L (white) 4 For Recording Audio R (red) LINE IN VIDEO AUDIO L AUDIO R LINE VCR OUT 5 For Playback 6 For Viewing 1 Connect the cab
