ページ1に含まれる内容の要旨
4-205-149-11(2)
R
Projection TV
GB
Instruction Manual
DE
Bedienungsanleitung
IT
Manuale d’ Istruzioni
GR
ÃäèçÝå÷ ÌòÜóè÷
KP-41PZ1D
©1999 by Sony Corporation Printed in Spain
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
Projection TV GB Instruction Manual Thank you for choosing this Sony projection TV. Before operating the projection TV, please read this manual thoroughly and retain it for future reference. Reading and Understanding this Instruction Manual: • Use Getting Started if you wish to install the projection TV set and to get familiar with the basic functions. • Use Advanced Operation if you wish to know more about the additional features of the projection TV set. • Symbols used in the manual: • Informs
ページ4に含まれる内容の要旨
For Your Safety WARNING Safety Information All TVs operate on extremely high voltages. To prevent fire or electric shock, please follow the safety procedures indicated below. For General Safety For Safe Operation • Do not expose the set to rain or moisture. • Do not operate the projection TV set on anything other • Do not remove the rear cover. than a 220-240V AC, 50Hz supply. • For your protection, refer all servicing to qualified • Do not operate the projection TV if any liquid or solid p
ページ5に含まれる内容の要旨
Table of Contents Table of Contents Keys to read this Instruction Manual .................................................................................................. 3 For your Safety ........................................................................................................................................ 4 Getting Started Overview Checking the Accessories Supplied ......................................................................................... 6 Overview of TV Butto
ページ6に含まれる内容の要旨
Getting Started - Overview Checking the Accessories Supplied VIDEO TV 1 2 3 4 5 6 7 8 9 0 PROGR MENU RM 892 Two batteries (R6 type) One safety foot S One Remote Control (RM-892) Overview of Projection TV Buttons Programme up or down Selecting Volume buttons Standby input control (selects TV On/Off source buttons channels) Switch indicator Press the flap on the S Video Video Audio Headphone Auto Auto front of the projection TV Input Input Input jack Tune Convergence to reveal the front panel jack
ページ7に含まれる内容の要旨
Getting Started - Overview Overview of Remote Control Buttons Displaying the time Press to switch the time on or off VIDEO TV (available only when teletext is broadcast). This button does not work on this set. VCR operation For more details, please refer to VTR 1 2 3 4 DVD the section "Remote Control of other Sony Equipment" CH Muting the Sound To Temporarily Switch Off projection TV Press to mute TV sound. Press to temporarily switch off TV (the Press again to restore the sound. standby indica
ページ8に含まれる内容の要旨
First time Operation - Installation Inserting Batteries into the Remote Control Make sure you insert the batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Stabilizing the Projection TV For safety purposes, the projection TV can be stabilized with the supplied safety foot. Fit the supplied safety foot in the support placed on the bottom of the set, as follows: 8 First time Operation - Installation
ページ9に含まれる内容の要旨
First Time Operation - Installation Connecting the Aerial Connect a conventional aerial to the socket marked on the rear of the projection TV. Switching on the projection TV Connect the projection TV plug to the mains socket (220-240V AC, 50Hz). Push in the On/Off switch on the front of the projection TV. First Time Operation - Installation 9
ページ10に含まれる内容の要旨
First Time Operation - Basic Presetting Selecting Language Use this function to change the language of the menu screens. The first time that you switch on your projection TV, the LANGUAGE menu appears automatically. However, if you need to change the language menu afterwards, select the menu Language in the (PRESET) menu and proceed in the same way as described below. LANGUAGE 1 Press the on/off button on your projection TV set to switch on English LANGUAGE Deutsch English your TV. The first t
ページ11に含まれる内容の要旨
First Time Operation - Basic Presetting Automatically Tuning the TV using the Remote Control You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV automatically searches and stores all available channels for you. After having selected the language, a new menu appears automatically on the projection TV screen asking you to automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move hou
ページ12に含まれる内容の要旨
First Time Operation - Basic Presetting Changing the Programme Order of the TV channels After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to change the order in which the channels appear on the screen. However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the (PRESET) menu and proceed in the same way as described in the b) section of this chapter. a) If you do not wish to ch
ページ13に含まれる内容の要旨
Advanced Operation - Advanced Presetting Adjusting Colour Registration (Convergence) Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the images. In that case, proceed as follows: Auto converge the Red, Green, and Blue Lines 1 Press the flap on the front of the projection TV by pressing on the mark to reveal the front control panel. 2 Press button on the projection TV. The Auto Convergence function works for about 30 second
ページ14に含まれる内容の要旨
Advanced Operation - Advanced Presetting Automatically Tuning the TV Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the instructions below, this projection TV also searches and stores automatically all available channels using just one button of the projection TV set and one button of the remote control. 1 Press the flap on the front of the projection TV by pressing on the mark to reveal the front control panel. Please confirm that 2
ページ15に含まれる内容の要旨
Advanced Operation - Advanced Presetting Manually Tuning the TV Use this function to preset channels or a video input source one by one to the programme order of your choice. PICTURE CONTROL 1 Press the MENU button on the remote control to display the VIDEO TV Picture Mode Personal menu on the screen. Contrast Reset Format Wide PRESET 2 Push the joystick to $ to select the symbol, then push to z to enter to the PRESET menu. Auto Programme Manual Programme Preset Further Programme Preset AV
ページ16に含まれる内容の要旨
Advanced Operation - Advanced Presetting Using the "Further Programme Preset" function With this feature you can: a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset the AV3 output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a connected VCR records the unscrambled signal. PICTURE CONTROL 1 Press the MENU b
ページ17に含まれる内容の要旨
Advanced Operation - Advanced Presetting Locking Programmes This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to prevent children from watching programmes you consider unsuitable. PICTURE CONTROL 1 Press the MENU button on the remote control to display the menu VIDEO TV Picture Mode Personal on the screen. Contrast Reset Format Wide PRESET 2 Push the joystick to $ to select the symbol, then push to z to Auto Programme enter to
ページ18に含まれる内容の要旨
Advanced Operation - Advanced Presetting Skipping Programme positions You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate TV system (B/G or D/K) instead of "- - -" in step 5. PICTURE CONTROL 1 Press the MENU button on the remote control to display the menu VIDEO TV Picture Mode Personal on the screen. Contrast Rese
ページ19に含まれる内容の要旨
Advanced Operation - Advanced Presetting Labelling a channel Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a channel or an input video source using up to five characters (letters or numbers). Using this function, you can easily identify which channel (TV Broadcasts) or video source you are watching. PICTURE CONTROL 1 Press the MENU button on the remote control to display the menu VIDEO TV Picture Mode Personal on the screen.
ページ20に含まれる内容の要旨
Advanced Operation - Advanced TV Operation Adjusting the Picture Although the picture is adjusted at the factory, you can modify it to suit your own taste. PICTURE CONTROL 1 Press the MENU button on the remote control to display the menu VIDEO TV on the screen. Picture Mode Personal Contrast Reset Format Wide 2 Push the joystick to z to enter the PICTURE CONTROL menu. 3 Push the joystick to $ or 4 to select the item you wish to change, PICTURE CONTROL then push to z. Picture Mode Personal Refe
