ページ1に含まれる内容の要旨
4-088-512-11 (2)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
CT
•
MY
Panduan Pengendalian
• Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti
dan simpan untuk rujukan masa depan.
KV-DR34
KV-DR29
M69
© 2002 Sony Corporation
ページ2に含まれる内容の要旨
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
ページ3に含まれる内容の要旨
Do not plug in too many appliances to the same Do not place any objects on the TV. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not stand surface is flat
ページ4に含まれる内容の要旨
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. or (1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Securely fix the
ページ5に含まれる内容の要旨
Table of Contents Installation Menu Adjustment Getting Started ..................................... 6 Introducing the menu system .......... 18 Setting up your TV Changing the “PICTURE” setting ... 21 (“INITIAL SETUP”) ............................. 7 Changing the “SOUND” setting ..... 23 Changing the Picture-in-Picture (“PIP”) setting .................................... 25 Overview of Controls Changing the “SETUP” setting ........ 26 TV front and rear panels ..................... 8 Changing th
ページ6に含まれる内容の要旨
b b Installation x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 31). Step 3 Plug in the power cord, then press ! on the TV to turn it on. Step 4 INI T I AL SETUP : LANGA U GE ENGLS I H Set up the TV by following the instructions of the “INIT
ページ7に含まれる内容の要旨
Installation : U S x Setting up your TV (“INITIAL SETUP”) SOUND MENU When you turn on your TV for the first time, MENU PIP PROGR the “INITIAL SETUP” menu will appear. This menu allows you to change the menu V/v/ENTER ENTER language, adjust the picture position and DRC-MF preset the TV channels automatically. PIP PROGR PIC MODE Press V or v to select the desired menu 1 INI T I AL SETUP language (e.g.,”ENGLISH”), then press : LANGA U GE ENGLS I H ENTER. The selected menu language appears. If the
ページ8に含まれる内容の要旨
Overview of Controls x TV front and rear panels TV rear panel qa RL Y PB/CB PR/CR 12 3 qs 4 ENTER SELECT L(MONO) R MENU PROGR AUTO PROGR qd qf TV front panel 9 0 8 76 5 4 3 2 1 ENTER SELECT L(MONO) R AUTO MENU PROGR PROGR 4 Button/Terminal Function Page 1 ! Turn off or turn on the TV. – 2 1 Standby indicator. – 2 Wake Up indicator. 15 2 Stereo/bilingual indicator. 16 3 Remote control sensor. – 4 PROGR +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. – 7 AUTO PR
ページ9に含まれる内容の要旨
Overview of Controls x Remote control qf Button Function Page 1 1?/1 Turn off temporarily or – qg turn on the TV. 3a Display the TV input. – 2 qh DVD 4 0 – 9, - Input numbers. – 3 qj 5 JUMP Jump to previous program – 1 23 number. 4 56 9 SURROUND Select surround mode. 14 4 7 89 0 WIDE MODE Select wide-mode (16:9). 12 JUMP qa PROGR +/– Select program number. – 0 5 qf Display on-screen information.– SOUND qk 6 qg% Mute the sound. – MENU PIP PROGR 7 ql qh DVD Select component video input. 32 w; qjt
ページ10に含まれる内容の要旨
continued Button Function Page es Menu operations ed wj MENU Display or cancel the menu. 20 wg DVD wk ENTER Confirm selected items. 20 ef 1 23 eh V, v, B, b Select and adjust items. 20 4 56 Teletext operations (green label) wh wg Enlarge the Teletext display. 17 7 89 wh 0 – 9 Input Teletext page number 17 JUMP 0 wl PROGR +/– Display the next or previous 17 SOUND eg page. MENU PIP PROGR e; Show TV screen while 17 wj waiting for Teletext page. ENTER eh ea Display Teletext service 17 wk DRC-MF co
ページ11に含まれる内容の要旨
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “PERSONAL” option. Selecting the picture mode Press PIC MODE to select the desired picture DVD mode. 1 23 Select To 4 56 7 89 “DYNAMIC” view high contrast pictures. JUMP 0 “STANDARD” view normal pictures. SOUND “HI-FINE” view higher density pictures MENU PIP PROGR with mild contrast. ENTER “PERSONAL” receive the last adjusted picture DRC-MF setting f
ページ12に含まれる内容の要旨
x Viewing higher quality pictures with DRC-MF The Digital Reality Creation-Multi Function (DRC-MF) feature allows you to enjoy higher quality pictures on your TV. You can use the DRC-MF button to select “DRC1250” or “DRC PROGRESSIVE”. SOUND MENU PIP PROGR Select To ENTER “DRC1250” view super real (higher density) DRC-MF pictures. DRC-MF PIP PROGR PIC SOUND WIDE MODE MODE SURROUND MODE “DRC PROGRESSIVE” reduce jitter of any small areas or PROGR scanning lines (e.g., letters or the edge of objec
ページ13に含まれる内容の要旨
x Watching Picture-in-Picture (PIP) With the PIP feature, you can display two different TV programs or video input at the same time by using the button. JUMP 0 SOUND To Press /SOUND/ / MENU PIP PROGR Display a sub screen . PIP PROGR +/ To cancel the sub screen, press ENTER PIP PROGR – the button again. DTE PIP PROGR PIC Change a program number MODE PIP PROGR + or in the sub screen PIP PROGR –. Select a video input in the . sub screen Swap pictures between . the main and sub screens Swap sound b
ページ14に含まれる内容の要旨
x Selecting a TV program using PIP You can select your desired TV program directly from the PIP sub screen by using PIP PROGR +/– buttons. SOUND MENU PIP PROGR Press PIP PROGR +/– until the desired program 1 PIP PROGR +/ ENTER appears in the sub screen. PIP PROGR –/ DTE PIP PROGR ENTER PIC SOUND WIDE SURROUND MODE MODE MODE Press ENTER to change the sub screen 2 PROGR program to the main screen. 2 1 x Listening with surround sound You can use the SURROUND button to listen to th
ページ15に含まれる内容の要旨
x Setting the timers You can set your TV to turn on and off automatically by using the WAKE UP and SLEEP timers respectively. Setting the Wake Up timer DVD Press until the desired period of time 1 appears on the screen. 1 23 WAKE UP TIMER:10M 4 56 (After 10 minutes) 7 89 JUMP 0 SOUND MENU WAKE UP TIMER:OFF WAKE UP TIMER:12H00M PIP PROGR (No Wake Up timer) (After 12 hours) ENTER DRC-MF The Wake Up timer starts immediately after you PIP PROGR PIC SOUND WIDE SURROUND MODE MODE MODE have set it. PR
ページ16に含まれる内容の要旨
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) A/B DVD NICAM MONO NICAM t 1 23 stereo (Regular sound) (Stereo sound) 4 56 7 89 JUMP 0 NICAM NICAM MAIN NICAM SUB MONO SOUND tt bilingual (Main sound) (Sub sound) (Regular sound) MENU PIP PROGR ENTER NICAM DRC-MF NICAM MAIN MONO t PIP PROGR monaural PIC SOUND WIDE (Main sound
ページ17に含まれる内容の要旨
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To Do this display a Teletext Press . Each time you press , the DVD page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV. 1 23 If there is no Teletext broadcast, “100” is 4 56 displayed at the top left corner of the 7 89 screen. JUMP 0 (r
ページ18に含まれる内容の要旨
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon PICTURE icon Name of the current menu SETUP SOUND icon LANGUAGE : ENGL I SH Guide mark icon PI C ROT A T I PIP icon ECOMODE : O Menu level 3 SETUP icon PROGRAM SE CH PRESET icon COLOR SYS : Menu level 2 Menu level 1 Level 1 Level 3/Function Page Level 2 “PICTURE” “DRC-MF” Select the “DRC-MF” mode: 21 “DRC1250” t “PROGR
ページ19に含まれる内容の要旨
Level 1 Level 3/Function Page Level 2 Change the menu language: 26 “SETUP” “LANGUAGE” “ENGLISH” t “ ”(Chinese) t “ ”(Arabic) t “ ”(Thai) “PIC ROTATION” Adjust the picture position. Reduce power consumption of your TV. “ECO MODE” “PROGRAM Adjust each program number settings. SETUP” “COLOR SYS” Select the color system: “AUTO” t“ PAL” t “SECAM” t “NTSC3.58” t “NTSC4.43” Preset channels automatically. “AUTO 28 “CH PRESET” PROGRAM” Preset channels manually. “MANUAL PROGRAM” Select the TV system:
ページ20に含まれる内容の要旨
continued How to use the menu MENU Press MENU to display PIP PROGR MENU PI CTURE the menu. DRC - MF : DRC1 2 5 0 PI CTURE MODE : DYNAM I C ENTER b 3D - NR : OF F WI DE MODE : OF F DRC-MF GAMENMODEN:O TFP F IC:OFF PIP PROGR PIC SOUND WIDE SURROUND MODE MODE MODE PROGR Press V or v (or B/b) PIP POS ITION: to select the desired PIP:OFF ENTER item. SWA P b RESET PIP Press ENTER to POS I T I ON : ENTER PIP:OFF TV confirm your b SWA P selection and go to the next level. Other menu operations To Press
