ページ1に含まれる内容の要旨
Slim Series
USER GUIDE
Slim8800 DECT Digital Cordless Slim8000 DECT Digital
Telephone with Answering System Cordless Telephone
Keep this user guide for future reference.
ページ2に含まれる内容の要旨
1 CONTENTS Using the phone 13 Contents To Make a call 13 To Make a call by Pre-dialling 13 To Make a call by speed dial (keypad 1 to 9) 13 Getting started 4 Call from the phonebook 13 Call from the calls list 13 Important 4 Answer a call 13 Location 5 To adjust the volume 14 Handset range 5 To mute the microphone 14 Signal strength 5 To end a call 14 Installation and Charger 5 To switch handset on/off 14 Select your Country 5 To call a second external number 14 Battery low warning 6 Multi-handse
ページ3に含まれる内容の要旨
CONTENTS 2 To store an entry 17 Clock & Alarm 24 Entering names 17 To set date and time 24 Character map 18 To set alarm 24 Enter a pause 18 To set alarm melody 24 To view an entry 18 To edit an entry 19 Personal settings 25 To delete an entry 19 To delete all entries 19 To set the ring volume 25 To copy the phonebook to another handset 19 To set the ring melody 25 To store a phonebook entry as a speed dial number 20 To set a Group melody 25 To delete a speed dial number 20 To set the Key tones
ページ4に含まれる内容の要旨
3 CONTENTS To Reset your Phone 29 To play messages 34 Auto prefi x 29 To delete all messages 34 To set Country 30 To record a memo 34 To turn intrusion on 30 Remote access 35 To turn Remote Access on/off 35 Call screening 35 Registration 31 To interrupt at the handset: 35 Register new handsets on the Slim base 31 Switch handset call screening on/off 35 To register a handset 31 To access the answering machine menu via the Calls list 36 To unregister a handset 31 Memory full 36 To set TAM Language
ページ5に含まれる内容の要旨
GETTING STARTED 4 exposure to radio waves (EMR). The mean power of this telephone Important does not exceed 20mW limit at which point testing is required. • Privacy of communications may not be ensured when using • Avoid exposure of this telephone to moisture or liquid. this telephone. • To prevent electric shock, do not open the handset or base cabinet. • The earpiece of the handset may attract small metal objects • Avoid metallic contact (e.g. metal clips, keys) between the such as staples
ページ6に含まれる内容の要旨
5 GETTING STARTED fl ashes and the handset gives an out-of-range warning tone every minute. This tone is repeated until you move back into range. Location You need to place your Slim base within 2 metres of the mains power socket and telephone socket so that the cables will reach. Installation and Charger Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your unit works by sending radio signals between 1. Connect the mains adaptor (supplied) to the
ページ7に含まれる内容の要旨
GETTING STARTED 6 WARNING Battery low warning DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-MH RECHARGEABLE If the icon fl ashes in the display, you will need to recharge the BATTERIES AS SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR handset before you can use it again. During charging, the icon in the display will scroll. REPLACEMENT BATTERIES. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use
ページ8に含まれる内容の要旨
7 GETTING STARTED purchased the product, or directly from Oricom (Australia). The Slim can accommodate a total of 5 cordless handsets. Pack contents Important: Depending on the model you have purchased this pack should contain the following items: DO YOU HAVE BROADBAND/ADSL? If any of these are missing, please contact Oricom directly. If you do, you must connect an in line fi lter (not supplied) between the telephone socket and your Slim base to ensure that your broadband and Slim8000/ Slim8
ページ9に含まれる内容の要旨
GETTING STARTED 8 Wall mounting wall bracket (supplied) IMPORTANT Before you wall-mount your Slim, check that you are not drilling into any hidden wiring. Before you drill, make sure the power and telephone line cables holes will reach the sockets. lugs Method A. To fi t the wall bracket (supplied) to an existing telephone wall plate with modular connector Method B. Attach the Wall bracket (supplied) directly to a wall simply; 1. Choose a suitable position to wall mount the base ensuring th
ページ10に含まれる内容の要旨
9 GETTING TO KNOW YOUR PHONE Overview of the Handset Redial / Clear / Back / Mute Clear incorrect input during text editing Back / to return to previous menu Earpiece Mute microphone during call When the appears press this key to see more information on screen Menu / OK Use to access and select From standby screen, press to access the options in the menu Dialled Calls list Talk / Recall Call log / Scroll Up / Volume up Call Log and shortcut to Answer Machine menu Phonebook / Scroll Down /
ページ11に含まれる内容の要旨
GETTING TO KNOW YOUR PHONE 10 Handset display Handset Battery Level Answering machine Displays the current power levels of your handset Displayed when the answering machine is on. Flashes battery. slowly when you have new messages. Flashes quickly when the memory is full. Signal Steady when the handset is registered and within range of the base. Flashes when the handset is out of In Use range or searching for base. Displayed when the line is in use and fl ashes when there is an in
ページ12に含まれる内容の要旨
11 GETTING TO KNOW YOUR PHONE Overview of the base Navigating the menu The basic steps of navigating through the menu and on-screen options. Play/Pause 1. From the standby screen, press [ ]. The main menu is Switch the answer opened. machine on/off LED Message Indicator 2. Use the [ ] or [ ] keys to scroll through the menu. 3. Soft key options OK and are displayed. Press [ ] to select OK and open a sub-menu or validate an option. Delete message 4. Press [ ] to select and go back to pr
ページ13に含まれる内容の要旨
GETTING TO KNOW YOUR PHONE 12 Menu map PHONEBOOK CLOCK/ALARM PERSONAL SET ADVANCED SET ANSW MACHINE NEW ENTRY DATE & TIME HANDSET TONE RECALL TIME PLAY LIST ENTRY SET ALARM ¬ RING VOLUME CALL BARRING DELETE ALL ¬ ¬ OFF ¬ RING MELODY REGISTRATION RECORD MEMO ¬ EDIT ENTRY ¬ ON ONCE ¬ GROUP MELODY ¬ SELECT BASE ANSWER MODE ¬ DELETE ENTRY ¬ ON DAILY ¬ KEY TONE ¬ REGIST. BASE ¬ ANSWER &REC DELETE ALL ALARM TONE HANDSET NAME UNREGISTER ¬ PREDEFINED DIRECT MEM AUTO PICK-UP PIN ¬ PLAY AUT
ページ14に含まれる内容の要旨
13 USING THE PHONE TIP Using the phone Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the fi rst letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the To Make a call entries starting with B, etc... 1. Press [ ]. Call from the calls list 2. Dial the telephone number. Note: You need to subscribe to your network’s Caller ID service to be able to see the caller’s number i
ページ15に含まれる内容の要旨
USING THE PHONE 14 To switch handset on/off TIP If Auto Pick up mode is on, simply lift up the handset from its base to answer 1. Press and hold [ ] until the handset switches off. the call. The default setting is On. If you have changed Auto Pick up mode to 2. Press and hold [ ] again to switch the handset back on. Off, you will need to press [ ] to answer a call. Note NOTE if the handset is turned off, the phone will not ring. An incoming call has priority over other events. Whenever th
ページ16に含まれる内容の要旨
15 USING THE PHONE • If more than two handsets are registered to the base, their Multi-handset Operation numbers are displayed, e.g. 2345*. Enter the number of the Your Slim can have up to 5 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4 and handset you want to call or press [ ] to ring all handsets. HS-5 shown on the left-hand side of the display. 2. Press [ ] to hang up. With 2 or more handsets you can: NOTE • Make intercom calls while on an
ページ17に含まれる内容の要旨
USING THE PHONE 16 4. Press [ ]to switch between both callers. Call waiting (Australia Only) 5. Press [ ] to hang up. You can use the recall function to answer a second call while you are on the phone. However this service needs to be turned on. For To make a three way conference call example, to turn on Telstra’s Call Waiting service: 1. Press [ ] on the cordless handset to wait for dial tone then 1. During an external call, press [ ]. Your caller is put on hold. press[ ] [ ] [ ] [ # ]
ページ18に含まれる内容の要旨
17 PHONEBOOK 5. Enter a number. Press [ ] to save. Press [ ] or [ ] Phonebook to select NO GROUP, GROUP A, B or C and press [ ] to confi rm. The Slim handset phonebook can store up to 100 names and 6. Press [ ] to return to standby. numbers. NOTE NOTE You can assign individual contacts to specifi c groups of your choice. For Numbers can be up to 24 digits long and names up to 12 characters long. example, Group A contains phone numbers of all your co-workers. You can also Entries are stor
ページ19に含まれる内容の要旨
PHONEBOOK 18 Character map Enter a pause If your Slim is connected to a switchboard, you may need to enter Key characters and symbols a pause in a stored number. This gives the switchboard time to get an outside line. A Pause is normally stored after the switchboard Space 1 - < > * access code (e.g. 0) 1. When storing a number, press and hold [ # ] until the display A B C 2 shows P. You can then continue storing the phone number. D E F 3 To view an entry In standby: G H I 4 1.
ページ20に含まれる内容の要旨
19 PHONEBOOK To edit an entry To delete all entries 1. Press [ ]. 1. Press [ ] twice. 2. Scroll [ ] or [ ] to the entry you want to edit and press 2. Scroll [ ] or [ ] to DELETE ALL and press [ ]. [ ]. EDIT ENTRY is displayed. Press [ ] again. 3. Display shows CONFIRM?. Press [ ]. 3. Edit the name and press [ ] to confi rm. Use [ ] to delete 4 Press [ ] to return to standby. characters. To copy the phonebook to another handset 4. Press [ ] and edit the number. 1. Press [ ] twice. 5. Press
