ページ1に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 1
User Manual (Part 2)
2.4 GHz Cordless
Telephone 1445/1145
with Caller ID & Call Waiting
ページ2に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 2 You must install and charge the battery before See page 7 STOP! using the telephone for easy instructions For customer service or product Please also read information, visit our web site at Important Product Information www.telephones.att.com Enclosed in product package or call 1-800-222-3111 CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: •
ページ3に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 1 User Manual (Part 2) 2.4 GHz Cordless Telephone 1445/1145 with Caller ID & Call Waiting Table of contents Getting Started Caller ID Operation QUICK REFERENCE GUIDE..................2 Caller ID operation...........................20 Parts checklist.......................................4 To review yourcall log......................21 Before you begin ..................................5 To dial a call log entry ..............
ページ4に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 2 Getting Started Quick reference guide Incoming calls (see page 20) Handset NEW 00 OLD 27 AM 0 8/12 10:06 Low battery Date and time (see page 7) (see page 10) Select Hold Press to store a programming option Press to place a call on hold. Press (see page 10), or to store a directory again to resume your call. entry in memory (see page 17). ^V Volume/Function Phone/Flash During a call, press ^V to adjust Press to be
ページ5に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 3 Getting Started Quick reference guide Telephone Base ANTENNA Swivel fully upright for best results. PAGE/ HANDSET LOCATOR Press to locate handset if lost (see page 14). IN USE/CHARGING MESSAGE Steady: Handset battery is charging. Flashes when you have new voice Flashing: Phone is in use, or call is mail (requires voice mail service on hold. from your local telephone company). NEW CALL If you have Caller ID service: On when
ページ6に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 4 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Telephone handset Power adapter Battery pack Belt clip Long line cord Short line cord 4
ページ7に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 5 Getting Started Before you begin About Caller Identification Telephone operating range Caller ID with Call Waiting features in This cordless telephone operates with this telephone let you see who’s calling the maximum power allowed by the before you answer the phone, even Federal Communications Commission when you’re on another call. These (FCC). Even so, this handset and base features require services provided by can commu
ページ8に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 6 Getting Started Telephone base installation Install the telephone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111. Be sure to use an electrical outlet not controlled by a wall switch. Plug
ページ9に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 7 Getting Started Battery installation & charging After installation, place the handset in the base and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours. NEW 00 OLD 27 AM 0 8/12 10:06 Low battery indicator Return handset to base to recharge when this symb
ページ10に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 8 Getting Started Wall mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Connect line cord and AC adapter as shown on page 6, then press notch and pull to open hinged wall mount Swivel wall mount down and lock in place Plug
ページ11に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap) 9
ページ12に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 10 Telephone Operation Customizing your telephone Follow the steps below to program the telephone. To stop at any time, press OFF. If the phone rings, program- ming stops automatically so you may answer the call. Choose ringer sound 1 Press PROG to begin programming. 2 Press ^ until screen displays RINGER & setting. 3 Press SELECT to change current setting: RINGER: 1 Default setting: 1 Press PROG to begin programming 4 Press
ページ13に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 11 Telephone Operation Customizing your telephone Choose dial mode 1 Press PROG to begin programming. 2 Press ^ until screen displays DIAL MODE & setting. 3 Press SELECT to change current setting: DIAL MODE: TONE Default setting: Tone 4 Press ^ to display TONE or PULSE. 5 Press SELECT to select displayed dial mode and exit. Choose language 1 Press PROG to begin programming. 2 Press ^ until screen displays LANGUAGE & setting.
ページ14に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 12 Telephone Operation Making and answering calls Making and answering calls To answer an incoming call, press any key except OFF. To make a call, press PHONE, then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE to dial. Press V at any time to make corrections as you are entering numbers. Speed dialing & directory dialing To use speed dialing, press and hold a di
ページ15に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 13 Telephone Operation Options while on calls PAT JOHNSON * Caller ID 908-555-0100 If you have Caller ID service, the caller’s number will AM 8/12 10:06 appear on the display screen after the first ring (see page 20 for additional Caller ID features and options). Call waiting If you have Call Waiting service, you will hear a beep if someone calls while you are already on a call. Press PHONE to put your current call on ho
ページ16に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 14 Telephone Operation Handset locator Handset locator If the handset is misplaced, press the PAGE/HANDSET LOCATOR button in the handset cradle on the base. The handset will beep for 60 seconds to help you find it. When the handset is found, press OFF to stop the beeping (or press the PAGE/HANDSET LOCATOR button on the base). 14
ページ17に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 15 Directory Dialing PAT JOHNSON Directory dialing 5550100 The telephone directory in the handset can store up to 50 names and telephone numbers. Each entry can contain a number up to 24 digits, and a name up to 15 letters long. A convenient search feature can help you find and dial numbers quickly (see pages 16-19). Speed dialing The first nine memory locations (1 through 9) are reserved for numbers you dial frequently. The
ページ18に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 16 Directory Dialing PROG 1 DIRECTORY Speed dialing Numbers called most frequently can be stored in memory locations 1-9 and dialed with only two button presses. 2 ^ You can enter 9 Speed Dial numbers up to 24 digits SPEED DIAL long. Each number is stored in a one-digit memory location (1-9). SELECT 3 To enter a Speed Dial number ENTER 1-9 1 Press PROG to begin programming. 2 Press ^ to display SPEED DIAL. 3 Press SELECT. EN
ページ19に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 17 Directory Dialing PROG 1 DIRECTORY Entering names into directory To enter a name SELECT Press dial pad buttons once for the first letter, twice for 2 the second, three times for the third, as shown in the ENTER NAME example below. To enter a number, continue pressing the button until the number appears. Press once to enter “A” 3 Press twice to enter “B” Press 3 times to enter “C” Press 4 times to enter “2” PAT JOHNSON_ 2 T
ページ20に含まれる内容の要旨
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 18 Directory Dialing DIR 1 DIRECTORY Directory name search Follow the steps at left to browse through the tele- phone directory, or search to find a specific entry. You 2 ^ can press OFF at any time to exit the directory. ADAM 5551234 To browse through the directory To browse, press ^ or V to scroll through all list- To display first listing ings one by one. ^ V NOTE: "D" will appear in the display if the entry has been assi
