ページ1に含まれる内容の要旨
V MixTM 2.4 GHZ Cordless Phone
USER’S MANUAL
gz2334
Animated Caller ID Match
Five Musical Ring Tones Built-In
Changeable Face/Base Plates
ページ2に含まれる内容の要旨
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for example, near
ページ3に含まれる内容の要旨
Important Safety Instructions 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Only put the handset of your telephone next to your ear when it is in normal talk mode. 2 3
ページ4に含まれる内容の要旨
Before You Begin Enhanced 2.4GHz Technology - Dual band transmission combines the best of 2.4GHz and 900MHz technologies, providing enhanced performance over standard cordless telephones. Parts Check List 1. Base Unit 6. Belt Clip 2. Handset 7. User’s Manuals 3. AC Power Adapter 8. Color Handset and Base Plates 4. Telephone Line Cord 5. Battery To purchase replacement batteries, please call VTech Telecommunications Canada Ltd. at 1-800-267-7377. Handset Base Unit Color Handset a
ページ5に含まれる内容の要旨
Setup Installation of Battery in Handset 1. Remove the battery compartment cover by pressing the button on top of the handset and pulling the cover off. 2. Align the two holes in the plug with the socket pins, then snap the plug into place. 3. Place the battery in the compart- ment, with the wires in the lower left corner. Angle the top half of the battery in first, under the two claws. Then snap the lower portion of the battery into place. 4. Replace the cover by snapping it back into
ページ6に含まれる内容の要旨
Setup Check for Dial Tone After the battery is charged, connect the modular telephone cord between a live phone jack and the jack located on the bottom of the base unit. Pick up the handset and press ON. You should hear a dial tone. CAUTION: Use only the VTech power supply provided with your telephone. IMPORTANT! FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1. Choose a central location for your base unit. 2. Install your base unit and extension handsets away from electr
ページ7に含まれる内容の要旨
Handset Features Flashes in unison with an incoming call’s ringing. (CID) • When phone is not in use, press to display ( ) caller ID information. • When phone is not in • During a call, press to de- use, press to display crease listening volume. directory entries. A double beep will sound when you reach the low- • During a call, press to est setting. increase listening vol- ume. A double beep will sound when you reach ON/FLASH • Press this button then the highest setting.
ページ8に含まれる内容の要旨
Base Features PAGE IN USE/CHARGING MESSAGE Light Press to page the handset Indicator Flashes when a caller for up to 60 seconds. Press • Flashes when the handset leaves a message again, press OFF, or place is in use. in your voice mailbox, the handset in its base to • Flashes in unison with an see Message Waiting cancel the page. incoming call’s ringing. on page 8 for details. • Flashes rapidly when a call is on hold. • On steady when the handset is charging in the base. 6 7 Basic
ページ9に含まれる内容の要旨
Telephone Operation Set Handset Ringer Style You can select from four traditional ringers, five musical ringers, or turn the ringer OFF. 1. Make sure the handset is OFF. 2. Press PROG. 3. Press until the screen displays RINGER: and the current setting. 4. Press SELECT. The current setting blinks, and you will hear a sample of the ring. 5. Press or to select the desired option. You will hear a sample of each ring. 6. Press SELECT to choose the desired ringer. If you chose a musical ring
ページ10に含まれる内容の要旨
Telephone Operation You can retrieve your voicemail messages from any telephone. If the indicators remain on after all new messages have been reviewed, you can turn them off manually: 1. Make sure the handset is OFF. 2. Press PROG. 3. Press or until the screen displays MESSAGES WAITING. 4. Press SELECT. The screen displays: 5. Use or to choose YES or NO. Press SELECT or PROG to confirm. If you choose YES, the MESSAGES WAITING animation on the handset and the MESSAGE LED on the Base wi
ページ11に含まれる内容の要旨
Telephone Operation If you move out of range without pressing OFF, your phone will be left off the hook. To hang up properly, walk back into range, periodically pressing OFF. Display Screen Messages Screen Displays: When ** RINGING ** There is a call coming in. The handset is waiting for dial tone. CONNECTING... PHONE ON The handset is in use. MESSAGES WAITING You have recieved telephone company voice mail. The base is paging
ページ12に含まれる内容の要旨
Speed Dial You can store as many as nine telephone numbers with names (up to 15 characters and 24 digits in each location) you dial frequently into the speed dial memory locations you assign in the handset. NOTES: 1. The entries you store in speed dial memory will be marked 01 through 09 in the telephone directory. 2. Press OFF at any time to exit speed dial mode. Store a Number/Name in Speed Dial Memory 1. Press PROG. 2. Press or until the screen displays SPEED DIAL. 3. Press SELECT. The
ページ13に含まれる内容の要旨
Speed Dial -OR- Press REDIAL/PAUSE to display the last number dialed. 8. Press SELECT or PROG. The screen displays DISTINCT RING? and the current set- ting. 9. Press or to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pattern after the first ring. Choose N for a normal ringing pattern. 10. Press SELECT or PROG to confirm your selection. If you chose Y, the screen dis- plays: NOTE: If you chose N, y
ページ14に含まれる内容の要旨
Speed Dial in Store a Number/Name in Speed Dial Memory. Delete a Number/Name Stored in Speed Dial Memory 1. Press and hold the memory location key (1 through 9) of the entry you wish to delete. 2. When the screen displays the number you want to delete, press SELECT. Then press or until ERASE flashes. 3. Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes. 4. Press or until YES flashes. 5. Press SELECT. You will hear a confirmation beep. Dial a S
ページ15に含まれる内容の要旨
Telephone Directory This cordless phone can store 20 telephone numbers with names (including nine speed dial entries), each up to 15 characters for the name and 24 digits for the number. NOTE: Press OFF at any time to exit directory. Store a Number/Name in the Directory 1. Press PROG. The screen displays DIRECTORY. 2. Press SELECT. The screen displays ENTER NAME. 3. Using the chart below, enter up to 15 characters for the name you’re storing with the number. Use to backspace and make correct
ページ16に含まれる内容の要旨
Telephone Directory 8. Press SELECT or PROG to confirm your selection. If you chose Y, the screen dis- plays: NOTE: If you chose N, skip to Step 10. 9. The ringer name will blink. Press or to choose the desired ring tone. Then press SELECT or PROG to confirm. The screen displays: 10. Press or to change the setting. Choose Y (for yes) if you wish the phone to show an animation when the incoming call matches this number. Choose N for no animation. Your choices of anima
ページ17に含まれる内容の要旨
Telephone Directory Delete a Number/Name Stored in the Directory 1. Press ( ). The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries. -OR- Press the dial pad key for the first letter of the entry you want to delete. 3. When the screen displays the entry you want to delete, press SELECT. Then press until ERASE flashes. 4. Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes. 5. Press until YES flashes. 6. Press S
ページ18に含まれる内容の要旨
Caller ID Operation About Call History This phone assigns each incoming call a number from 1 to 45. The most recent call will have the highest number. When the memory is full, the oldest call information is deleted to make room for new incoming call information. For each call that comes in, the screen displays the following information between the first and second rings: • Your caller’s name (up to 15 letters are sent by your telephone company). • The caller’s area code and telephone number.
ページ19に含まれる内容の要旨
Caller ID Operation flashes. 4. Press SELECT again. The number is automatically dialed. -OR- When the number is correctly displayed for dialing, press ON. Store a Call History Record in the Directory 1. Locate the record in the call history you want to store in the directory. 2. If you wish to change how the number is stored, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1 + number). 3. Press SELECT,
ページ20に含まれる内容の要旨
Ringer Options In addition to four traditional ringer options and ringer OFF, your gz 2334 handset has five popular pre-programmed melodies. Traditional Ring Options Ringer 1 Ringer 2 Ringer 3 Ringer 4 Ringer OFF Pre-programmed Melodies: 1. Punk 2. Grunge 3. HipHop 4. Pop 5. Rock 18 19 Basic Operation
