ページ1に含まれる内容の要旨
WXI3077 User's Guide
What's in the box?
WXI3077 base
with waterproof
cordless handset
Not pictured:
- Factory installed
rechargeable battery
- AC adapter (PS-0035)
- Telephone cord
- Belt Clip
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Need help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
817-858-2929 or
have a question or problem Customer Care Line*
800-297-1023
need a re
ページ2に含まれる内容の要旨
Avoid using a telephone (other than a cordless type) during an What’s in the manual? electrical storm. There may be a remote risk of electric shock from Important Safety Instructions! ..... 2 Setting Up MULTIRANGE lightning. Understanding the Chargers ................................. 17 Do not use the telephone to report a gas leak near the actual leak. Registering Handsets ................ 17 Waterproof Handset ................ 3 Use only the power cord and batteries indicated in thi
ページ3に含まれる内容の要旨
Connect the telephone cord GettING StarteD Connect the TEL LE in jack to a standard telephone wall jack. Installing Your Phone Test the connection Charge the battery 1. Pick up the handset from the cradle and press TaLk/fLash . You The handset's rechargeable battery is already installed. Before you can should hear a dial tone and the display should say Talk. charge the battery, you have to activate it. If you don't hear a dial tone or the display says Check Tel Line, 1. Remove the cardboard
ページ4に含まれる内容の要旨
Handset keys and how they work Key name What it does (and icon) Key name What it does (and icon) E ps akEr ( ) - Switch a call to the speakerphone (and back). - In standby: increase the ringer volume. Up ( ) - During a call: increase the call volume. - In standby: open the redial list. rEL dia /paUsE - In a menu or any list: move the cursor up one line. - While entering a phone number: insert a 2-second ( ) pause. - In standby or during a call: open the Caller ID list. MEE ssag s Cid/r
ページ5に含まれる内容の要旨
Display icons and what they mean Using the Menus Since the icons appear based on what you’re doing with the phone, To open the you won’t ever see all of these icons at the same time. menu, press Press MENU/SELECT MENU/SELECT. to choose the Icon What it means highlighted option. The cursor The ringer is turned off: this handset will not ring Handset Setup shows the when a call comes in. highlighted Day & Time T-coil option. Privacy Mode is on: no other handset can join yo
ページ6に含まれる内容の要旨
Banner Change the name used on the handset’s display. To switch to all capital letters, press . The phone displays [Aa] * Handset and defaults to all capital letters first (e. g. ABCabc2) until you Change the display language. Language enter a blank space or press again. Pressing again will change * * to lowercase letters first ([aA]). Any time you want to change case, Have the keypad sound a tone when you press a Key Touch Tone just press . key. * If two letters in a row use the sa
ページ7に含まれる内容の要旨
Using Caller ID and Redial Lists Do this to... Caller ID (CID) is a service available from your telephone provider from the earpiece... from the speaker... that shows the phone number (and sometimes the caller’s name) of switch between the incoming calls. Contact your telephone provider for more information. speakerphone and Press pE s akEr . earpiece Caller ID (CID) list redial list mute the ringer for - The phone saves the information for the While the phone is ringing, press MUTE. this
ページ8に含まれる内容の要旨
To select a number, highlight the number and press MEnU/sELECT . The Add an entry to your phonebook. The handset phone gives you the following options: Create New prompts you to enter a name and number and select a personal ring. Delete Entry Erase the number from the list. Delete All Erase all the entries in the phonebook. Add the number to the phonebook. The handset prompts Store Into you to edit the name and number and select a personal Chain dialing Pb ringtone. If you often have to e
ページ9に含まれる内容の要旨
example), press rEdiaL/paUsE to insert a 2-second pause. You can Setting Up MULTIRANGE Chargers insert as many pauses as you need, but each pause counts as one If you expand your phone system by purchasing a separate digit. Press MEnU/sELECT when you’re finished. MULTIRANGE charger, you will have a separate manual discussing Retrieve your messages the charger in detail, including how it works, how to reset it, how to attach the wall mount bracket, etc. When you have new messages, the voi
ページ10に含まれる内容の要旨
Call transfer If... try... - you don’t hear a dial tone Making sure the handset is fully to… Do this... charged, then starting over from the - The display says Press CLEar/inTEC r oM , then select the Registration Failed beginning of this section. handset you want to transfer the call to transfer a call (select All to page all the handsets). When If a handset was previously registered to a base, you have to reset it the other handset accepts the call, you’ll be so you can register it to a
ページ11に含まれる内容の要旨
If… try… to... Do this... A handset can make Press TaLk/fLash. The phone - Making sure the ringer is turned on. answer an outside call calls, but it won’t ring. automatically disconnects the intercom during an intercom call - Charging the battery for 16-20 hours. call and connects you to the outside line. A handset is not - Checking that the handset battery is activated (see page 4). working. Solving Multi-Handset Problems - Resetting the handset. If… try… - Moving the handset closer to the
ページ12に含まれる内容の要旨
fluorescent light fixtures (especially if giving off a buzzing noise) Liquid damage other services that use your phone line, like alarm systems, Moisture and liquid can damage your cordless phone. If the exterior intercom systems, or broadband Internet service housing of the handset or base is exposed to moisture or liquid, wipe off the liquid, and use as normal. If moisture or liquid is inside the If static is on 1 handset or in 1 If static is on all handsets or in plastic housing (i.e
ページ13に含まれる内容の要旨
Use only the supplied AC adapter. Be sure to use the proper Resetting Your Handset adapter for the base and charger. If you are having trouble with a cordless handset or if you want to Do not place the power cord where it creates a trip hazard or replace one, you need to clear the registration information from the where it could become chafed and create a fire or electrical hazard. base and the handset: Do not place the unit in direct sunlight or subject it to high temperatures. Do yo
ページ14に含まれる内容の要旨
1. Unscrew the four screws holding the battery cover and remove it. telephone provider. The REN for this product is part of the product identi- fier that has the format US:AAAEQ##TXXXX. The digits represented by ## 2. Remove the old battery pack from the battery compartment. are the REN without a decimal point (e.g., 03 is a REN of 0.3). 3. Line up the new battery's connector with the jack inside the If this equipment causes harm to the telephone network, the telephone battery compartment (th
ページ15に含まれる内容の要旨
FCC Part 15 Information Industry Canada (I.C.) Notice This device complies with part 1 of the FCC rules. Operation is subject Terminal equipment to the following two conditions: (1) This device may not cause harmful NOTICE: This equipment meets the applicable Industry Industry Canada Terminal Canada Terminal interference, and (2) This device must accept any interference received, Equipment Technical Specifications. This is confirmed by the registration including interference that may cause u
ページ16に含まれる内容の要旨
by this warranty, (E) used in any conjunction with equipment or parts • The pictures in this manual are for example only. Your phone may not look or as part of any system not manufactured by Uniden, or (F) installed or exactly like the pictures. May be covered under one or more of the following U.S. patents: programmed by anyone other than as detailed by the owner's manual for 7,20,403 7,310,3 7,40, 3 this product. Other patents pending. STATEMENT OF REMEDY: In the event that the pro
ページ17に含まれる内容の要旨
