ページ1に含まれる内容の要旨
D1484 Series User's Guide
What's in the box?
Base with
Accessory handset
answering
and charger
Not pictured for base:
system and
x Rechargeable battery (BT-1021)
cordless
x Battery cover
handset
x AC adapter (PS-0035)
x Telephone cord
You should
For model
have (handset/
numbers:
charger):
D1484-2 1 of each
D1484-3 2 of each
D1484-4 3 of each
Not pictured for handset/charger:
D1484-5 4 of each
x Rechargeable battery (BT-1021)
D1484-6 5 of each
x Battery cover
x AC adapter (PS-0035)
x If an
ページ2に含まれる内容の要旨
What’s in the manual? Getting Started ....................................... 3 Personalizing the Greeting .....................11 Installing Your Phone ............................... 3 Accessing the Answering System ...........11 Getting to Know Your Phone ...................4 Getting Your Message ............................12 Using the Menu ....................................... 6 Using the System While You’re Away from Home ................................12 Using Your Phone ............
ページ3に含まれる内容の要旨
GETTING STARTED Installing Your Phone Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If you need to remove a cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset; the connector only fits one way. 3. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery is securely connected. 4. Replace the battery cover and slide it into place. 5. Use an AC a
ページ4に含まれる内容の要旨
Getting to Know Your Phone 12-key CALLER ID/ END dialpad RIGHT Earpiece MENU/ Handset SELECT MESSAGE/ MUTE INTERCOM/ CLEAR REDIAL/ PAUSE Status SPEAKER PHONEBOOK/ TALK/FLASH LEFT Key (icon) What it does x In standby: increase the ringer volume. up ( ) x During a call: increase the volume. x In any menu or list: move the cursor up one line. x In standby: decrease the ringer volume. x During a call: decrease the volume. dowN ( ) x In any menu or list: move the cursor down one line. x In standby
ページ5に含まれる内容の要旨
Reading the Display The icons appear based on what you're doing with the phone. Icon What it means Icon What it means The ringer is turned off. The speakerphone is on. You have an answering system You have a voice mail message. message. Privacy Mode is on (see p. 10). T-coil mode is on (see p. 6). The battery is 1) fully charged, Enter 1) capital or 2) lower [Aa] 2) half charged, 3) getting low, [aA] case letters. or 4) empty. Ans. System Base On/O Find Delete Handset Play/Stop LCD Disp
ページ6に含まれる内容の要旨
Entering Text on Your Phone x Use the 12-key dial pad anytime you want to enter text into your phone (e.g. a name in the phonebook). x If two letters in a row use the same key, enter the first letter; wait for the cursor to move to the next space and enter the second letter. To... Press... move the cursor left phoNEbook/LEfT. move the cursor right caLLEr Id/rIghT. erase the character at the cursor INTErcoM/cLEar. erase the entire entry and hold INTErcoM/cLEar. enter a blank space #. switch bet
ページ7に含まれる内容の要旨
Menu Option What it does Key Touch Have the keypad sound a tone when you press a key. Tone Answering Setup Menu Refer to p. 10 for details on setting up your answering system. Date & Time Menu Use this menu to set the clock (if you have Caller ID, the phone sets date and time automatically). Enter the date and time; select AM or PM. Use caLLEr Id/rIghT to move the cursor past a digit without changing it. To confirm, press MENu/ sELEcT. Global Setup Menu The settings on this menu affect all ha
ページ8に含まれる内容の要旨
You can adjust the ringer volume when the phone is in standby; to turn off the ringer, turn the ringer volume all the way down. Finding the Handset With the phone in standby, press fINd on the base. All handsets beep for 1 minute. To cancel, press fINd again or press any handset key. Using the Phonebook, Caller ID, and Redial Lists x The phone can store up to 70 entries in its phonebook. x If you subscribe to Caller ID (CID) service, the phone stores the information for the last 30 received c
ページ9に含まれる内容の要旨
Chain Dialing If you often have to enter a series of digits or a code number during a call, you can save that code number as a regular phonebook entry and use the phonebook to send the code number. Make a call normally. When you hear the prompt that asks you to enter your number, open the phonebook and find the entry. Press MENu/sELEcT to send the code. If you change your mind, just close the phonebook. Using Call Waiting x Call Waiting, a service available from your telephone provider, let
ページ10に含まれる内容の要旨
Conference Calling x When an outside call comes in, two handsets can join in a conference call with the outside caller. x To join a call that’s already in progress, just press TaLk/fLash or spEakEr. x To leave the conference call, hang up normally; the other handset remains connected to the call. Privacy Mode To activate privacy mode on a call in progress, press MENu/sELEcT twice. As long as privacy mode is on, you’ll see a in the display, and no other handsets can join your call. Privacy
ページ11に含まれる内容の要旨
Menu Option What it does Call Screen Turn on the call screen feature on the base (see p. 12). Ans. On/Off Turn your answering system on or off. Record Greeting Record an outgoing message or greeting (see below). Greeting Options Switch greetings or delete your greeting (see below). Personalizing the Greeting Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don’t record a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take yo
ページ12に含まれる内容の要旨
- You can press the number key shown next to each command instead of scrolling through the screens. - If you do nothing for 30 seconds, the phone returns to standby. Getting Your Message When you have new messages (that you have not listened to yet), only the new messages will be played. To play old messages, completely play all new messages first, and then start message playback again. To... From the base From a handset play new messages Press pLay/sTop. Press MEssagE/MuTE. Wait at least 5
ページ13に含まれる内容の要旨
Programming a Security Code With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press MENu/sELEcT when you’re finished. # Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number from any touch-tone phone, and wait until the system answers. x If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new m
ページ14に含まれる内容の要旨
Audio issues Possible solutions x The battery is getting low. Check the handset for a low I hear a beeping battery alert. Finish your conversation and return the during a call. handset to the cradle as soon as possible. x Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi There’s a lot of equipment, etc.). Move the handset or base away from the noise or static interference source. on the line x Move the handset closer to the base
ページ15に含まれる内容の要旨
Liquid Damage CAUTION: If the base is covered in liquid, disconnect the adapter and phone cord from the wall before touching it. If the liquid is only on the exterior housing of the base or handset, wipe it off and use as normal. If you can hear liquid inside the housing: 1. Remove all compartment covers, and disconnect all cables and cords. 2. If liquid is leaking from any vent or hole, turn the phone so that vent faces down. If not, place the largest vent face down. 3. Let dry for at least
ページ16に含まれる内容の要旨
Uniden works to reduce lead content in advised of your right to file a complaint PVC coated cords in our products and with the FCC if you believe it is necessary. The telephone company may make changes accessories. in its facilities, equipment, operations or Compliance Information procedures that could affect the operation of the equipment. If this happens the FCC Part 68 Information telephone company will provide advance This equipment complies with Part 68 of notice in order for you to
ページ17に含まれる内容の要旨
may not cause harmful interference, and (2) are included in the package; any additional This device must accept any interference or optional accessories are not required received, including interference that may for compliance with the guidelines.) Third cause undesired operation. Privacy of party accessories (unless approved by the communications may not be ensured when manufacturer) should be avoided as these using this phone. might not comply with FCC RF exposure guidelines. FCC PART 15
ページ18に含まれる内容の要旨
number of terminals allowed to be STATEMENT OF REMEDY: In the event connected to a telephone interface. The that the product does not conform to this termination on an interface may consist of warranty at any time while this warranty is any combination of devices subject only to in effect, warrantor will either, at its option, the requirement that the sum of the Ringer repair or replace the defective unit and Equivalence Numbers of all the devices return it to you without charge for parts,
ページ19に含まれる内容の要旨
Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 ® As an Energy Star Partner, Uniden has determined that this product meets the ® Energy Star guidelines for energy efficiency. ® Energy Star is a U.S. registered mark. ® x Uniden is a registered trademark of Uniden America Corporation. x The pictures in this manual are for example only. Your phone may not look exactly like the pictures. E
ページ20に含まれる内容の要旨
20 - English
