ページ1に含まれる内容の要旨
UIP1869V
OWNER'S
MANUAL
ページ2に含まれる内容の要旨
Contents WELCOME /FEATURES 2 TROUBLESHOOTING 73 Troubleshooting 73 TERMINOLOGY 4 ADDITIONAL INFORMATION 81 CONTROLS & FUNCTIONS 5 Note on Power Sources 81 GETTING STARTED 7 General Information 83 Setting up your Broadband Phone 7 PRECAUTIONS & WARRANTY 84 Expanding Your Phone 15 Installing the Beltclip 18 I.C. NOTICE 85 Optional Headset Installation 18 INDEX 86 Installing Uniden's Cordless Telephone Customization Tool 19 Using the Interface 20 Main Menu Options 25 Global Setup 27 Setting Up the
ページ3に含まれる内容の要旨
WELCOME/ FE ATURES With the UIP1869V broadband Internet telephone, Vonage's Internet phone service and Welcome your broadband connection, you can access the Internet and make phone calls simultaneously. The UIP1869V connects directly to your broadband modem. It separates voice signals from data signals and sends voice traffic to its cordless handsets and data traffic to your computer. If you a have a local switch or router supporting a LAN, the UIP1869V will pass all Data traffic through t
ページ4に含まれる内容の要旨
WELCOME/ FE ATURES This series features AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random Code™ digital security, which automatically selects one of more than 10,000,000 dig
ページ5に含まれる内容の要旨
TERMINOLOGY Accessibility If you have a disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line:1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a message, and we will call you back. Information is also available on our website, www.uniden.com, under the "Accessibility" link. Terminology
ページ6に含まれる内容の要旨
CONTROLS & F UNC TIONS Controls & Functions 1 1. New Message LED 15 2. Volume (up) (P. 45) 7 3. Volume (down) (P. 45) 4. Talk/flash (P. 40 & 41) 16 5. Back/hold/intercom 2 (P. 23, 42 & 70) 6. /tone (P. 65) * 3 7. Ear Speaker 17 8. Soft keys (P. 22) 8 9. end (P. 40) 18 9 4 10.Joystick (P. 23) 10 11.speaker (P. 40) 5 12.# (P. 65) 11 13.Handset Microphone 14.Handset Charging Contacts 19 15.Handset Antenna 16.Beltclip Hole 17.Speakerphone Speaker and Ringer 6 12 18.Headset Jack 19.Handset Batte
ページ7に含まれる内容の要旨
CONTROLS & F UNC TIONS 21 22 23 24 25 32 33 34 35 26 36 37 38 27 41 42 43 44 45 46 LEDs Power LAN WAN Phone1 Phone2 28 29 30 31 40 39 Power LAN Phone1 Status Status Status Inactive Phone 2 WAN LED Status Status 21. phonebook (P. 51) 30. do not disturb /DND LED (P. 47) 38. exit (P. 58) 22. In use LED 31. /tone/< (P. 66) 39. mic (microphone) 23. New Message LED 32. LCD Display 40. #/> (P. 66) 24. call id (P. 64) 33. /vol / (volume up/down) 41. Phone 1 port 25. Corded Base Handset (P. 45 & P. 28)
ページ8に含まれる内容の要旨
GET T I N G STARTED Setting up your Broadband Phone Safety Recommendations To ensure general safety, follow these guidelines: Do not open or disassemble this product. Do not expose the product to moisture. Do not perform any action that creates a potential hazard to people or makes the equipment unsafe. Ultimate disposal of this product should be handled according to all national laws and regulations. Do not touch the wires on the cable ports or the wires of cables connected to a por
ページ9に含まれる内容の要旨
GET T I N G STARTED 911 Service Notice 911 dialing is not automatic. note Vonage services do not include traditional 911 emergency dialing. You must successfully activate the 911 dialing feature (register and subscribe) by following the instructions at www.vonage.com/911. Vonage's version of 911 is outlined in the If you ordered your Vonage User Guide; your responsibilities as a Vonage subscriber are outlined in the UIP1869V directly from Vonage Terms of Service contract. It is important y
ページ10に含まれる内容の要旨
GET T I N G STARTED Check Your Broadband Configuration The UIP1869V supports the two most common broadband connection protocols: DHCP and PPPoE. If your broadband connection uses DHCP, you do not need to change any settings on the UIP1869V. If your broadband connection uses PPPoE, you will need to enter your user name and password in Step 3. If your broadband provider has given you a static IP address, you will need a special configuration for your UIP1869V. See the User Interface Guide at www
ページ11に含まれる内容の要旨
GET T I N G STARTED 3) Use the yellow Ethernet cable to connect your PC to the yellow RJ-45 port labeled Ethernet (LAN). If you use a switch or router for a local network, connect it to the Ethernet (LAN) port instead. note You can also connect a wireless access point to the Ethernet (LAN) port, if desired. Phone1 is not a separate line. Any phone connected to Phone1 will share VoIP line 1 with all the UIP1869V's cordless handsets. 4) OPTIONAL: If you have a second phone you want t
ページ12に含まれる内容の要旨
GET T I N G STARTED 5) Use the included AC adapter to connect the POWER port to a 120 Vac continuous power outlet. CAUTION To avoid risk of fire or electrical hazard, use ONLY the included AC adapter! All the LEDs will flash several times, and the Power LED will remain on. If the UIP1869V was properly recognized by Vonage's network, the Phone 1 LED will illuminate. Test your connection by making a call with the corded handset and browsing to a web page from your PC. If you have any diffi
ページ13に含まれる内容の要旨
GET T I N G STARTED Enter http://192.168.15.1 (the UIP 1869V broadband telephone system's default IP address) in the address field of your browser and hit the ENTER key. A screen with fields for your username and password will appear. Enter "admin" in both fields for now (you should set a new password later using the Advanced tab's user configuration screen). Then click "OK". Select the Setup Tab at the top of the screen, then select "WAN Configuration" from the menu on the left. This
ページ14に含まれる内容の要旨
GET T I N G STARTED Install the rechargeable battery pack into the handset note 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. Use only the Uniden 2) Place the battery pack in the battery compartment with the connectors on the battery and (BT-0003) on the compartment aligned. rechargeable battery pack supplied with your cordless 3) Place the battery case cover back on the handset and slide it upwards un
ページ15に含まれる内容の要旨
GET T I N G STARTED Connect the charger note The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger. For maximum range: 1) Connect the AC adapter to the DC IN 9V Do not hold the jack and to a standard 120V AC wall outlet. handset where you Caution: To avoid risk or fire or shock, use might block the signal. only the included AC adapter. Antenna 2) Set the charger on a desk or tabletop, and place the handset in
ページ16に含まれる内容の要旨
GET T I N G STARTED Expanding Your Phone Ten Handset Expandability Your phone supports up to ten handsets, including any handsets supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. Handsets can be used in DirectLink Mode or on an intercom call without interfering with incoming calls. It is possible to have a 4-way conference among the base, two handsets, and one outside line. All of the handsets ring w
ページ17に含まれる内容の要旨
GET T I N G STARTED Registering Expansion Handsets Handsets supplied with the phone are registered to the base by the factory. When note you register an extra handset to the base, the handset ID will be assigned. Before the expansion handset is registered, the battery pack MUST be charged for If a handset has ever 15-20 hours. been registered to a different base, you must de-register the To register expansion handsets, follow the steps below: handset before you can register it to the 1)
ページ18に含まれる内容の要旨
GET T I N G STARTED System Reset De-register the Handset When you de-register a handset, the handset will also be removed from the base index. The base must be in range and powered on before you can degister a handset. 1) Press and hold end and # for more than 5 seconds. Select Deregister HS. 2) The phone will ask you to confirm the deregistration. Select Yes. When the base information is deleted, the handset displays MUST place the handset in base to register! Models may vary, refe
ページ19に含まれる内容の要旨
GET T I N G STARTED When the base information is deleted, the handset displays MUST place the handset in base to register! Models may vary, refer to Owners Manual for help. Re-register the handset to the base (see page 16). Installing the Beltclip To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull either side of the beltclip to release the tabs from the holes. Optional Headset Installation Your ph
ページ20に含まれる内容の要旨
GET T I N G STARTED Installing Uniden's Cordless Telephone Customization Tool This phone includes Uniden's Cordless Telephone Customization Tool for your Windows PC. You can use this software application to completely configure your phone, download pictures for wallpaper, and import contacts from Microsoft Outlook. NOTE: Uniden's Cordless Telephone Customization Tool requires either Microsoft®, Windows® 98SE, Windows ME, Windows 2000, Windows XP and more than 150MB free hard drive space. 1
