ページ1に含まれる内容の要旨
TRU 8065/8865
SERIES
OWNER'S
MANUAL
ページ2に含まれる内容の要旨
Contents Speed Dialing 45 WELCOME/FEATURES/TERMINOLOGY 2 Editing or Erasing a Phonebook Entry 46 CONTROLS & FUNCTIONS 4 Copying Phonebook Entries 47 DISPLAY AND ICONS 6 CALLER ID 48 SOFT KEY FUNCTION 8 Caller ID and CIDCW (Caller ID on Call Waiting) 48 GETTING STARTED 9 Deleting a Caller ID Message 50 Setting up the Phone 9 Using the Caller ID Message List 51 Mounting the Base Unit on a Wall 12 Call Waiting Deluxe Features 53 Expanding Your Phone 14 MULTI-HANDSET FEATURES 54 Connecting the Charg
ページ3に含まれる内容の要旨
WE L C O M E / FE AT URES/ Congratulations on your purchase of the Uniden Digital Expandable Cordless Welcome Telephone System! This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 10 handsets. You can now place a fully-featured cordless handset anywhere in your home or office where AC power is available to connect the handset chargers. Extra handsets also allow you to establish a 4-way conferenc
ページ4に含まれる内容の要旨
WE L C O M E / FE AT URES/ This series features AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random Code™ digital security, which automatically selects one of more than 10,000
ページ5に含まれる内容の要旨
CONTROLS & F UNC TIONS Controls & Functions 1. Handset Antenna 1 5 2. Beltclip Hole 14 3. Speakerphone Speaker and Ringer 6 4. Handset Battery Compartment 2 5. New Message LED 6. Handset Earpiece 7 3 7. LCD Display 8. soft Keys (P. 8) 8 15 9. cid/vol/ (volume up) (P. 49, 34 & 17) 9 16 10.redial/p/vol/ (volume down) (P. 34 & 31) 10 17 11. /tone/< (P. 36 & 42) * 12.speaker (P. 31) 4 13.intcom/hold (P. 55 & 32) 14.Headset Jack Cover 11 18 12 19 15.talk/flash (P. 31 & 32) 13 16.end (P. 31) 20 17.ph
ページ6に含まれる内容の要旨
CONTROLS & F UNC TIONS 22 23 24 32 41 42 43 33 34 25 35 26 36 37 38 39 27 28 29 30 31 40 22. In use LED 30. do not disturb (P. 35)/DND LED 38. exit (P. 44) 23. phonebook (P. 40) 31. / tone / < (P. 36) 39. /volume / (volume up/down) 24. cid (P. 49) 32. LCD Display (P. 34 & 17) 25. Charge LED 33. soft Keys (P. 8) 40. # / > (P. 42) 26. Base Charging Contacts 34. Base Speaker 41. DC IN 9V Jack 27. intercom/hold (P. 55 & 32) 35. speaker/speaker LED (P. 31) 42. TEL LINE Jack 28. mic (microphone) 36.
ページ7に含まれる内容の要旨
DISPLAY A ND IC O N S Display and Icons Example of the standby mode display Handset Ringer off icon (when the ringer is off)/ day of the week and time / battery icon Handset ID and Banner Number of new Caller ID calls received (If there are no new Caller ID messages, the Handset ID appears here.) •Base Day of the week and time envelope icon * Ringer Volume Level Number of new Caller ID calls received * This icon changes depending on ringer volume level (High, low and off) ICON Appears D
ページ8に含まれる内容の要旨
DISPLAY AND ICONS Animation Displays (Handset only) The handsets have a variety of animation displays. Below are examples of the animation screens and what they mean: Turning on the phone Hanging up the phone Confirmation (Done!) Deleting (Deleted!) Making a call Find Handset/Paging the Handset Also, the animation display changes depending on the ringer volume setting. Out of Range Unavailable Low Battery [7] DISPLAY AND ICONS www.uniden.com
ページ9に含まれる内容の要旨
SOFT KEY FUNCTION Soft Key Function "Soft" keys are keys that change function during the operation of the phone. There are three soft keys on the base and three on each handset. The function of each soft key is determined by the icon that appears directly above it. For example, when the base is in standby mode, pressing soft key 1 will redial the last number. When the handset is in talk mode, pressing soft key 1 will mute the microphone. Complete information on the features co
ページ10に含まれる内容の要旨
GE TTI NG STA R TED Setting up the Phone note A. Choose the best location When choosing a location for your new phone, here are some important guidelines you should consider: For maximum range: Keep the antenna free of obstruction. When the handset is not in use place the handset in an upright position. Do not hold the handset where you would block the signal. Correct The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a swi
ページ11に含まれる内容の要旨
GET T I N G STARTED B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges note automatically when the handset is placed in the base unit. To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged. The battery may be purchased by calling Uniden's Parts 1) Press down on the handset battery case cover (use the Departme
ページ12に含まれる内容の要旨
GE TTI NG STA R TED C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to note a standard 120V AC wall outlet. Connect the AC adapter to a continuous power supply (i.e., an outlet that is not controlled by a Use only the supplied switch). [AD-830] AC adapter. Do not use any other 2) Set the base on a desk or tabletop, and place the AC adapter. handset in the base unit. Place the power cord so that it does not Place the base unit close to the AC outlet so tha
ページ13に含まれる内容の要旨
GET T I N G STARTED Mounting the Base Unit on a Wall Standard wall plate mounting ! This phone can be mounted on any standard wall plate. DO NOT use an AC outlet 1) Make the AC adapter and the telephone line cord controlled by a wall switch. through the hole on the wall mount adapter. 2) Plug the AC adapter into the DC IN 9V jack. 3) Plug the telephone line cord into the TEL LINE jack. 4) Slide the wall mount adapter into the notches on the base. 5) Plug the AC adapter into a standard 120V
ページ14に含まれる内容の要旨
GE TTI NG STA R TED Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. Make sure the wall material is capable of supporting the weight of the base and handset.
ページ15に含まれる内容の要旨
GET T I N G STARTED Expanding Your Phone note 10 Handset Expandability Your phone supports up to 10 handsets, including any handsets supplied with your If you have any trouble phone. You can now place a fully-featured with your phone, visit cordless handset anywhere AC power is our web site at available to connect the handset charger. www.uniden.com or call our Customer Hotline at Up to 2 handsets can be used in DirectLink 1- 800-297-1023 (Mon - Mode or on an intercom call without
ページ16に含まれる内容の要旨
GE TTI NG STA R TED Register the Handset note If you purchase an expansion handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When An extra handset can be registered when the charged, pre-registered handsets display a handset ID number. Handsets that have main base is in not been registered display Models vary! Charge handset on the base for standby mode. registrat
ページ17に含まれる内容の要旨
GET T I N G STARTED Main Menu Options note Your phone has six main menu options: DirectLink Mode, Room Monitor, Handset Setup, Base Setup, Global Setup and Deregister HS. You can change Room Monitor, and Global Setup settings from the base or from any handset. DirectLink For Global Setup, Mode, Handset Setup, and Deregister HS are only available from a handset. Base and Deregister HS Setup is only available from the base. menu options, make sure the line is not Handset and Base Setup
ページ18に含まれる内容の要旨
GET T I N G STARTED Setting Menu Options Using the interface Below are some tips for using the software interface on your phone. Handset Press the MENU soft key to access the main menu. Use volume up/down to scroll through options. Press the OK soft key to make a selection. Press the BACK soft key to return to the previous screen. Base Press end or exit to exit the menu. [17] GETTING STARTED www.uniden.com
ページ19に含まれる内容の要旨
GET T I N G STARTED DirectLink Mode (Handset only) note In DirectLink mode, a pair of handsets can function as two-way radios. DirectLink Mode allows two handsets to communicate with each other without the base unit or a telephone line. Use them at sporting events or while shopping to stay in contact You must have at least with family members or friends. You must set both handsets to DirectLink Mode to two handsets to use activate this feature. Direct Link Mode. Using DirectLink Mode
ページ20に含まれる内容の要旨
GET T I N G STARTED Room/Baby Monitor note This feature allows you to monitor sounds in another room. Place the base or a handset in the room you wish to This feature only works monitor; it will function as a when the handset(s) is Monitor using within the range of the microphone. A second handset can be handset or base unit base. set to function as a remote speaker, allowing you to monitor sounds in the room. Using Room/Baby Monitor 1) Press the MENU soft key and select Room Mon
