ページ1に含まれる内容の要旨
K 2.91 M
Operating
Instructions
Before first use of the
unit read these operating
instructions and act in
accordance with them.
5.962-476.0 (02/09)
ページ2に含まれる内容の要旨
Assembly see page 10 2
ページ3に含まれる内容の要旨
Dear Customer, Description of the Appliance Please read and comply with The scope of delivery of your appliance is il- these original operating instruc- lustrated on the packaging. Check the con- tions prior to the initial operation of your ap- tents of the appliance for completeness pliance and store them for later use or when unpacking. subsequent owners. In the event of missing accessories or any transport damage, please contact your dealer. Contents Illustrations on Page 2 1 Coupling el
ページ4に含まれる内容の要旨
Warranty General information The warranty terms published by the rele- Hazard levels vant sales company are applicable in each Danger country. We will repair potential failures of Immediate danger that can cause severe your appliance within the warranty period injury or even death. free of charge, provided that such failure is caused by faulty material or defects in man- Warning ufacturing. In the event of a warranty claim Possible hazardous situation that could please contact your de
ページ5に含まれる内容の要旨
oil. The spray mist thus generated is Safety instructions highly inflammable, explosive and poi- Danger sonous. Do not use acetone, undiluted Never touch the mains plug and the acids and solvents as they are damag- socket with wet hands. ing to the materials from which the ap- The appliance must not be used if the pliance is made. power cord or important parts of the ap- Warning pliance, e.g. high-pressure hoses, trig- The mains plug and the coupling of an ger gun or safety devices a
ページ6に含まれる内容の要旨
Caution Operation Do not operate the appliance at temper- atures below 0 °C. Before Startup Observe a distance of at least 30 cm Mount loose parts delivered with appliance when using the jet to clean painted sur- prior to start-up. faces to avoid damaging paintwork. Illustrations on Page 10 Never leave the appliance unattended Illustration when it is in operation. Pull out the clamp for the high-pressure Make sure that the power cable or ex- hose from the trigger gun (e.g. a small ten
ページ7に含まれる内容の要旨
Water supply from mains Spray lance with pressure regulation Observe regulations of water supplier. Carrying out the most common cleaning For connection values, see type plate/tech- tasks. The work pressure can be stageless- nical data. ly regulated between "Min" and "Max". Use a fibre-reinforced water hose (not Release the lever on the trigger gun. included) with a standard coupling. Turn the spray lance to the desired po- (Minimum diameter 1/2 inch (13 mm), sition. minimum length 7.5 m).
ページ8に含まれる内容の要旨
Finish operation Maintenance and care Caution Danger Only separate the high-pressure hose from Turn off the appliance and remove the the trigger gun or the appliance while there mains plug prior to any care and mainte- is no pressure in the system. nance work. After operation with detergent: Fill the Maintenance detergent tank with clear water, turn the spray lance with pressure regulator to The appliance is maintenance-free. the position "Mix", switch the appliance on for about 1 minute
ページ9に含まれる内容の要旨
No detergent infeed Troubleshooting Use spray lance with pressure regula- You can rectify minor faults yourself with tion (Vario Power). the help of the following overview. Turn the spray lance to "Mix" position. If in doubt, please consult the authorized Clean the detergent suction hose filter. customer service. Check the detergent suction hose for kinks. Danger Turn off the appliance and remove the mains plug prior to any care and mainte- Technical specifications nance work. Repair w
ページ10に含まれる内容の要旨
Assembly 10 English
ページ11に含まれる内容の要旨
Spare Parts English 11
ページ12に含まれる内容の要旨