ページ1に含まれる内容の要旨
SS E15
Series Owner's Manual
OWNER'S MANUAL
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Welcome/Features 2 Emergency Dial Controls and Functions 3 Emergency Dial 20 Terms Used in this Manual 4 Storing the Emergency Dial 20 Getting Started Using the Speed Dial Memory Installing the Phone 5 Using the Speed Dial Memory 21 A. Choose the Best Location 5 Storing Names and Numbers in B. Connect the Base Unit and Charge Speed Dial Memory 21 the Handset 6 Storing Caller ID Messages C. Set the Visual Ringer Brightness 8 in Speed Memory Locations 24 D. Mount the Base Unit on a Wall 9
ページ4に含まれる内容の要旨
Congratulations on your purchase of the Uniden cordless telephone. This Welcome cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for Features explanation purposes. • 2.4GHz Extended Range 3 Line Backlit Easy to Read Display Technology Audio Boost Visual Ringer LED Last Number Redial Large Backlit Keys Find Handset Key Caller ID* Earpiece/
ページ5に含まれる内容の要旨
Controls and Functions 1. Handset antenna 2. Audio boost switch 3. Volume/ (ring)/+ key (p. 16/ 14) 4. Volume/ (ring)/- key (p. 16/ 14) 5. Handset battery compartment 6. Handset visual ringer LED 7. Handset earpiece 8. LCD display 9. CID key (p. 27) 10. Redial/pause key (p. 16/ 23) 11. /tone/ key (p. 22) 12. Memory key (p. 21) 13. Menu key (p. 11) 14. Talk key (p. 15) 15. Emergency ( ) key (p. 20) 16. Flash key (p. 19) 17. / key (p. 22) 18. Delete/channel key (p. 22/ 18) 19. Select key (p. 11) 2
ページ6に含まれる内容の要旨
24. DC in 9V jack 25. Telephone line jack 26. Visual ringer switch (p. 8) 27. Ringer tone button (p. 14) 28. Ringer volume adjuster (p. 14) 29. Ringer on/off switch (p. 14) 30. Base speaker 31. Base visual ringer LED 32. Base antenna 33. Charge/in use LED (p. 6) 34. Find handset key (p. 18) 35. Base charging contacts 35 Terms Used in this Manual Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk key has not been pressed and there is no dial tone. Talk M
ページ7に含まれる内容の要旨
GETTING STARTED Installing the Phone Do the following steps: A. Choose the best location B. Connect the base unit and charge the handset C. Set the visual ringer brightness (optional) D. Mount the base unit on a wall (optional) If your home has specially A. Choose the best location wired alarm When choosing a location for your new phone, here are some important guidelines you should equipment consider: connected to Avoid noise sources such as a window the telephone Avoid heat sources, such as
ページ8に含まれる内容の要旨
B. Connect the Base Unit and Charge the Handset 1) Connect the AC adapter to the DC in 9V jack and to a standard 240V AC wall outlet. Connect the AC adapter to a continuous power supply. Use only the Place the base unit close to the AC supplied outlet so that you can unplug the AC AAD--041S adapter easily. AC adapter. Do not use any other AC adapter. The rechargeable battery is already installed in your phone. Do not place the power cord 2) Place the handset in the base unit. where it cr
ページ9に含まれる内容の要旨
GETTING STARTED 5) Once the handset battery pack is fully charged, connect the telephone line cord to the tel line jack and to a telephone outlet. If your telephone outlet isn't Australia Tel Line adaptor modular, contact your telephone (supplied) company for assistance. 6) After the phone is connected, pick up the handset from the base and press talk. If you do not get a dial tone, check the following: Be sure the telephone cord is securely connected to both the base and an active telephone j
ページ10に含まれる内容の要旨
C. Set the Visual Ringer Brightness The visual ringer switch allows you to set the brightness of the visual ringer/messages LED on the base. There are three options to choose from: high, low and off. If you set the switch to off, visual ringer/messages LED never flashes. [8]
ページ11に含まれる内容の要旨
GETTING STARTED D. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Remove the wall mount adapter from the base and snap it into the notches on the bottom of the base. If the base unit is mounted on the 2) Plug the AC adapter to the DC in 9V jack. wall, always put 3) Wrap the AC adapter cord inside the the handset in molded wiring channel as shown. the base with the 4) Plug the AC adapter into a standard CID display 240V AC wall
ページ12に含まれる内容の要旨
Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths. Make sure the wall material is capable of supporting the weight of the base and handset. Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the base unit will be placed. 1) Insert two mounting screws into the wall, (with their appropriate 3mm anchoring device), 100mm apart. Allow about 3mm between the wall and screw heads for mounting the phone. 2) R
ページ13に含まれる内容の要旨
GETTING STARTED Basic Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and Insert 0. AutoTalk Autotalk allows you to answer the phone simply by removing the handset from the base. You do not have to press any keys. 1) When the phone is in standby mode, press the menu key. The following screen appears. Name Tag :On 2) Press the select key to turn AutoTalk on. 3) Press the menu key to complete the setting. The handset returns to
ページ14に含まれる内容の要旨
2) Press the volume/ /- key to select CIDCW. 3) Press the select key to toggle and turn on Caller ID on Call Waiting. 4) Press the menu key and return the handset to the base unit to complete the setting. The handset returns to standby mode. Setting Name Tag (POP ID) The Name Tag feature works with the Caller Display number from Caller ID. You must subscribe to Caller ID service through your local telephone provider to use this feature. There is usually a fee for this service. When the phone rin
ページ15に含まれる内容の要旨
GETTING STARTED Setting the Insert 0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. 1) When the phone is in standby mode, press the menu key. The following screen appears. Name Tag :On 2) Press the volume/ /- key three times to select Insert 0. Name Tag :On 3) Press the select key to toggle Insert 0 On or Off. Insert 0 :Off 4) Press the menu key to complete the setting. The han
ページ16に含まれる内容の要旨
Selecting the Ringer Tone and Volume Base ringer on/off The ringer on/off switch allows you to set the base ringer on or off. If you set the switch to off, you never hear the base ringer tone. Base ringer tone Press the ringer tone button in standby mode to select one of 7 ringer tones. Base ringer volume Slide the ringer volume adjuster to set the base ringer volume. Handset ringer tone and volume Press the volume up key or volume down key (labeled as the volume/ /+ or volume/ /- key) in standb
ページ17に含まれる内容の要旨
BASICS Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the base. Refer to page 11 2) Press the talk key. "Basic Setup" to turn On the 3) Listen for the dial tone. AutoTalk feature if desired. 4) Dial the number. OR 1) Remove the handset from the base. 2) Dial the number. 3) Press the talk key. Receiving a call 1) Remove the handset from the base (If AutoTalk is on, the phone will automatically answer the call when you pick it up). 2) If the handset is off the
ページ18に含まれる内容の要旨
Redialing the last dialed number 1) Remove the handset from the base. 2) Press the talk key. 3) Listen for the dial tone. 4) Press the redial/pause key. OR 1) Remove the handset from the base. 2) Press the redial/pause key. 3) Press the talk key. Adjusting the Handset Earpiece Volume To change the earpiece volume, press volume/ /+ or volume/ /- key during a call. Audio boost As we get older, it often becomes harder to hear high frequency tones. Audio Boost lets you hear phone conversations more
ページ19に含まれる内容の要旨
BASICS Traveling Out-of-Range During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 1 minute. [17]
ページ20に含まれる内容の要旨
Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press the delete/channel key. Scanning appears on the display, indicating the phone is changing to another channel. The UltraClear Find Handset Plus true If you lost the handset, press the find handset key on the base. compander The visual ringer LED on the handset flashes, and circuitry virtually t
