ページ1に含まれる内容の要旨
EWCI 936
ページ2に含まれる内容の要旨
UP033BH_EXI7246C.book Page 1 Wednesday, June 16, 2004 2:14 PM Contents Making Calls from Speed Dial Memory 36 Welcome/Features 2 Making a Call from the Caller ID List 37 Controls and Functions 3 Adjusting the Earpiece Volume 37 Terms Used in this Manual 5 Using a Headset 38 Headset installation 38 Getting Started Making calls with the headset 38 Installing the Phone and Outdoor Weather Sensor 6 Receiving calls with the headset 39 A. Choose the Best Location Installing the Beltclip 39 Base an
ページ3に含まれる内容の要旨
WELCOME/FEATURES UP033BH_EXI7246C.book Page 2 Wednesday, June 16, 2004 2:14 PM Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and Welcome engineered to exacting standards for reliability, long life, and outstanding performance. Note:Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless phone may vary. As an Energy Star Partner, Uniden has de
ページ4に含まれる内容の要旨
CONTROLS & FUNC T I ONS UP033BH_EXI7246C.book Page 3 Wednesday, June 16, 2004 2:14 PM Controls and Functions Handset 1. Handset antenna 2. Jack for optional headset 1 3. Beltclip hole 4. Handset battery compartment 5. Handset earpiece 6. LCD display 2 5 7. / /vol/ (earpiece volume, ringer volume and scroll) key (pages 20, 22 and 37) 3 8. Call id/menu key (pages 19 and 28) 6 9. /tone/ ← key (left cursor) key * 12 (pages 24 and 40) 7 13 10. Redial/pause key (pages 25 and 36) 11. Select key (
ページ5に含まれる内容の要旨
CONTROLS & FUNCTI ON S UP033BH_EXI7246C.book Page 4 Wednesday, June 16, 2004 2:14 PM 20. Base charging contacts Base 22 29 30 21. Charge/in use and VMWI (Voice Mail Waiting Indicator) LED 23 22. Snooze button (page 18) 23. LCD display 24 24. Alarm switch (page 17) 25. Find handset key (pages 41 and 43) 20 26. Select key (page 14) 25 27. or (scroll) key 21 (page 14 and 17) 28. Enter key (page 14) 26 27 28 29. DC IN 9V jack Outside Weather Sensor 30. Telephone line jack 31 3233 31. Channel s
ページ6に含まれる内容の要旨
TERMS USED IN THIS MANUAL UP033BH_EXI7246C.book Page 5 Wednesday, June 16, 2004 2:14 PM Terms Used in this Manual Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone. CID - Caller ID CIDCW - Caller ID on Call Waiting www.uniden.com [5] TERMS USED IN THIS MANUAL
ページ7に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 6 Wednesday, June 16, 2004 2:14 PM Installing the Phone and Outdoor Weather note Sensor Do the following steps: A. Choose the Best Location (Base and Handset) If your home has B. Install the Rechargeable Battery Pack into the Handset specially wired alarm C. Connect the Base, Set up the Outdoor Weather Sensor and Charge the Handset equipment connected to D. Mount the Outdoor Weather Sensor on a Wall the telephone line, be E. Mount the Base Unit
ページ8に含まれる内容の要旨
GE TTING STARTED UP033BH_EXI7246C.book Page 7 Wednesday, June 16, 2004 2:14 PM Depending on the base location, there is a possiblity that the correct temperature and humidity can't be displayed. Do not place any objects around the base. The base should be placed in a well-ventilated area. The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch). The base and handset should be kept away from sources of electrical noise
ページ9に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 8 Wednesday, June 16, 2004 2:14 PM B. Install the Rechargeable Battery Pack into the Handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is ! placed in the base unit. Use only the Uniden 1) Press down on the handset battery case cover (use (BT-905) rechargeable the finger indention for a better grip) and slide the battery pack supplied cover downward to remove. with your cordless
ページ10に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 9 Wednesday, June 16, 2004 2:14 PM C. Connect the Base, Set up the Outdoor Weather Sensor and Charge the Handset 1) Connect the AC adapter to the DC IN 9V jack and to a ! standard 120V AC wall outlet. Connect the AC adapter The base will attempt to contact the outdoor weather to a continuous power sensor for five minutes after it is first connected. supply. Install the Alkaline batteries in the outdoor weather sensor immediately after connec
ページ11に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 10 Wednesday, June 16, 2004 2:14 PM 3) Install the Alkaline batteries into the battery compartment observing the correct polarity. Make sure the outdoor temperature and humidity appear on the ! base display within five minutes. If the outdoor temperature and humidity don't appear, switch the Channel switch to another channel and remove the Use only the Alkaline batteries supplied with batteries. Install the batteries again. your outdoor weath
ページ12に含まれる内容の要旨
GE TTING STARTED UP033BH_EXI7246C.book Page 11 Wednesday, June 16, 2004 2:14 PM D. Mount the Outdoor Weather Sensor on a Wall Follow the instructions below to mount the outdoor weather sensor on the wall. See page 7 to make sure you are mounting the weather sensor in the best location. Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Make sure the wall material is capable of supporting the weight
ページ13に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 12 Wednesday, June 16, 2004 2:14 PM E. Mount the Base Unit on a Wall 14 Standard wall plate mounting This phone can be mounted on any standard 6 wall plate. 1) Plug the AC adapter to the DC IN 9V jack. 2) Route the AC adapter cord through the molded wiring channel as shown. 3) Plug the AC adapter into a standard 120V AC wall outlet. 5 4) Plug the telephone line cord into the TEL LINE jack. Route the cord through the molded wiring channel as show
ページ14に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 13 Wednesday, June 16, 2004 2:14 PM Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. Make sure the wall mat
ページ15に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 14 Wednesday, June 16, 2004 2:14 PM Weather Menu Options To set the following four options, you must enter the base setup menu mode. To scroll through the menu options, repeatedly press the select key in standby mode. The system returns to standby after the each last menu option. If any of the following occurs during menu setup, you will have to select start over with the procedure you were performing. Time -Caller ID mess
ページ16に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 15 Wednesday, June 16, 2004 2:14 PM 5) If you select 12h in Step 2. you need to select AM or PM. Use the and keys to choose AM or PM, and then press the enter key. The setting is complete; the phone returns to standby mode. Press and hold the and keys to scroll quickly through the numbers for hour and minute on the display. B. Set the Date 1) Press the select key on the base twice. 2) Use the and keys to se
ページ17に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 16 Wednesday, June 16, 2004 2:14 PM C. Set the Temperature 1) Press the select key on the base three times. ° ° Use the and keys to choose Temperature F or Temperature C and then press the enter key. The setting is complete, and the phone returns to standby mode. D. Set Display Backlight 1) Press the select key on the base four times. 2) Use the and keys to choose Backlight High or Backlight Low and then pr
ページ18に含まれる内容の要旨
GETTING STARTED CH08'_Direct&Others.fm Page 17 Wednesday, June 16, 2004 2:55 PM Set the Alarm Clock note Set the Alarm •If the alarm setting is on and the time you have set comes, the alarm will ring. The alarm operation is completely independent from the handset operation. The alarm tone continues to ring despite any handset operation. If an incoming call is 1) Slide the alarm switch on the base to set (the alarm switch is on the right of the
ページ19に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 18 Wednesday, June 16, 2004 2:14 PM Turning off the Alarm When the alarm is set and the selected time comes, the alarm tone rings for ten minutes. note To turn off the alarm tone, slide the alarm switch to off, and then ALARM OFF appears on the display. Snooze Feature If the alarm is reset while the snooze feature To stop the alarm tone temporarily, press the snooze button. is on, the phone returns The alarm tone
ページ20に含まれる内容の要旨
GETTING STARTED UP033BH_EXI7246C.book Page 19 Wednesday, June 16, 2004 2:14 PM Basic Phone Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating AutoTalk (on/off) AutoTalk allows you to answer the phone simply by removing the handset from the base. You do not have to press any keys. 1) With the phone in standby mode, press and hold the call id/menu key. The following screen appears. 2) Pr
