ページ1に含まれる内容の要旨
4286-2
ページ2に含まれる内容の要旨
Contents Traveling Out-of-Range 21 Welcome/Features 2 Selecting a Different Channel 21 Controls and Functions 3 Find Handsets 21 Terms Used in this Manual 4 Using Call Waiting 22 Voice Mail Waiting Indicator 22 Accessibility 5 Using the Speed Dial Memory 23 Installing the Phone 6 Storing Names and Numbers in Speed Dial Memory 23 A. Choose the Best Location 6 Storing Caller ID Messages in Speed Dial Memory 26 B. Install the Rechargeable Battery Packs into the Handsets 7 Making Calls from Speed Di
ページ3に含まれる内容の要旨
Congratulations on your purchase of the Uniden dual handset cordless telephone. This phone is Welcome designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note:Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless phone may vary. • 2.4GHz Extended Range Technology � Last Number Redial Features � Dual Handset System � Voice Mail Waiting Indi
ページ4に含まれる内容の要旨
CONTROL S & FUNCTIONS Controls and Functions Handsets 1. Handset antenna 2. Jack for optional headset 1 3. Beltclip hole 4. Ringer speaker 5. Handset battery compartment 2 6. Handset earpiece 6 7. LCD display 3 8. / /vol/ (earpiece volume, ringer volume and scroll) key (pages 14, 17 and 7 23) 8 4 9. Call id/menu key (pages 14 and 28) 13 10. /tone/ key (left cursor) 9 14 * (pages 20 and 23) 15 11. Redial/pause key (pages 19 and 25) 12. Select/channel key (pages 14, 21 and 23) 13. Talk/flash ke
ページ5に含まれる内容の要旨
TE RMS USED IN T H IS MANUAL Main Base Extra Charging Cradle for Second Handset 27 25 20 21 26 22 23 24 20. Main base charging contacts 23. DC IN 9V jack 25. Charging contacts 21. Find hs key 24. Telephone line jack 26. Charge LED (pages 21 and 32) 27. DC IN 9V jack 22. Charge/in use and VMWI (Voice Mail Waiting Indicator) LED Terms Used in this Manual � Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dia
ページ6に含まれる内容の要旨
ACCESSIBILITY Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we will call you back. Information is also available on our
ページ7に含まれる内容の要旨
I N STALLI NG T H E P HONE Installing the Phone Do the following steps: note A. Choose the Best Location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets If your home has D. Mount the Main Base on a Wall specially wired alarm equipment connected to A. Choose the Best Location the telephone line, be When choosing a location for your new phone, here are some important guidelines you should consider: sure that ins
ページ8に含まれる内容の要旨
I N STALLI NG T H E P HONE B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is ! placed in the main base or charging cradle. Use only the Uniden 1) Press down on the handset battery case cover (use the (BT-905 or BT-1006) finger indention for a better grip) and slide the cover rechargeable battery downward to remove. pack supplied with your cordless telephone. 2) Plu
ページ9に含まれる内容の要旨
I N STALLI NG T H E P HONE C. Connect the Main Base and Charging Cradle, R Route the cor Route the cor oute the cord. d. d. and Charge the Handsets 1) Connect each AC adapter to the DC IN 9V jack and to each ! standard 120V AC wall outlet. 2) Place one handset in the main base and the other in the �Use only the supplied charging cradle with the keypad facing forward. AD-0001 AC adapter for the main base and 3) Make sure the charge/in use LED and charge LED illuminate. AD-310 or AD-1010 I
ページ10に含まれる内容の要旨
I N STALLI NG T H E P HONE D. Mount the Main Base on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the AC adapter to the DC IN 1 3 9V jack. 2) Plug the AC adapter into a standard 120V AC wall outlet. 3) Plug the telephone line cord into the TEL LINE jack. 4) Plug the telephone line cord into the telephone outlet. 5 5) Align the mounting slots on the main base with the mounting posts on the wall. Then push in and down until the phone is
ページ11に含まれる内容の要旨
I N STALLI NG T H E P HONE Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: � Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. � Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. � Make sure the wall material is capable of supporting the weight of the main
ページ12に含まれる内容の要旨
I N STALLI NG T H E P HONE Headset Installation Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See page 35.) [11] INSTALLING THE PHONE www.uniden.com
ページ13に含まれる内容の要旨
R E GIS T E R HANDS E T S T O T H E M A IN BA SE BE FORE USING! Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main base will automatically register to the note main base. The second handset (charging in the extra charging cradle) MUST also be registered to the �When you charge the main base before use. Follow the steps below to register the second handset. handsets, Caller ID summary screen and the name of the 1) Be sure both handsets are
ページ14に含まれる内容の要旨
WH EN T O R E - RE GI STER When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 12) each time the digital note security code is changed. Refer to page 32 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a Make sure to return the move), both handsets will need to be re-registered. To re-register, follow
ページ15に含まれる内容の要旨
BAS I C SE TUP Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2. Activating Au
ページ16に含まれる内容の要旨
BAS I C SE TUP You must subscribe to Caller ID service through your local telephone provider to use this feature. 1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears. 2) Press the /vol/ key to select CIDCW. 3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to main base to complete the setting. The handset returns to standby mode. Entering Your Area Code If you can ma
ページ17に含まれる内容の要旨
BAS I C SE TUP 4) Use the number keys (0 - 9) to enter the 3-digit area code. If you make an error, use the delete/transfer key to backspace. note 5) Press the select/channel key. A confirmation tone sounds. If your phone system 6) Press the end key to complete the setting. The handset returns to standby mode. requires pulse dialing and you need to send Choosing the Dialing Mode DTMF tones during a call, you can Your phone can communicate with the telephone network in two different ways: t
ページ18に含まれる内容の要旨
BAS I C SE TUP Setting the Language You can change the language the menu display uses. Choose from English, French, or Spanish. 1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears. 2) Press the /vol/ key four times to select Language. 3) Press the select/channel key to select Eng, Fr. or Esp. 4) Press the end key to complete the setting. The handset returns to standby mode. Selecting the Ring Tone and Volume Your phone has five different rin
ページ19に含まれる内容の要旨
USING YOUR PHO N E Using Your Phone note Making and Receiving Calls Making a call 1) Remove the handset from the cradle. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk/flash key. Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically To turn on the AutoTalk answer the call when you pick it up.) feature, see "Activating 2) Press the
ページ20に含まれる内容の要旨
USING YOUR PHO N E Transferring a Call Your cordless phone allows you to transfer outside calls from handset to handset; only one note handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use. To transfer a call If you transfer a call and 1) During a call, press the delete/transfer key. The call will it is not picked up after automatically be placed on hold and the transfer