ページ1に含まれる内容の要旨
CONTENTS
Handset Controls and Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Base Unit Controls and Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ2に含まれる内容の要旨
The Integrated Answering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Answering System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Turning the Answering System On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. 4. Do not use this product near water; for example, near a bath tub, wash bowl, kitch
ページ4に含まれる内容の要旨
Battery Safety Precautions Caution: To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: 1. Use only the appropriate type and size Battery Pack specified in this Operating Guide. 2. Do not dispose of the Battery Pack in a fire. The cell may explode. Check the Nickel-Cadmium Battery Disposal package insert for disposal instructions. 3. Do not open or mutilate the Battery Pack. Released electrolyte is corrosive and may cause damage to the eyes or skin
ページ5に含まれる内容の要旨
Introduction Congratulations on your purchase of the Uniden DXAI685 Cordless Telephone. This phone is designed to exacting standards which provide reliability, long life, and outstanding performance. Features • 25 Channels • Random Code™ Digital Security • AutoTalk™ • UltraClear Plus • AutoStandby™ • AutoSecure™ • Speakerphone • Page/Find Button • Pulse/Tone Dialing • Base/Handset Volume Controls • 20-Number Memory • 14 Day Battery Life • Voice Scramble AutoTalk™ allows you to answer a call by j
ページ6に含まれる内容の要旨
Now is the time for all good men to come to the aid of the Now is the time for party. all good Four men score to yeas ago come to the aid of our the fathers party. Four set forth a new score yeas ago nation our fathers conceived set in Liberty forth a new nation and conceived dedicated in to the Liberty and dedicated proposition to that the all men proposition that are created equal. The quick all men are created equal.brown The quick foxbrown jumped fox over the jumped over the garden garde
ページ7に含まれる内容の要旨
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void
ページ8に含まれる内容の要旨
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the Base Unit ant
ページ9に含まれる内容の要旨
+ – Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applying Power to the Base Unit All the DXAI685 phones require an AC outlet, without a switch to interrupt power, and the included AC Adapter. To relieve strain
ページ10に含まれる内容の要旨
Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 25 CHANNEL ULTRACLEAR PLUS Uniden talk caller id mem speaker tone volume flash redial volume chan new in use function pause cancel delete repeat play skip delete stop page / find ogm memo answer Extend"A"Phone 2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE
ページ11に含まれる内容の要旨
+ – 4. Place the AC Adapter cord around the strain relief. 5. Plug the other end of the telephone cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. 11 – + RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE
ページ12に含まれる内容の要旨
Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. 2. Place the telephone cord inside the molded channel on RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE the bottom of the Base Unit. 3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 12
ページ13に含まれる内容の要旨
4. Place the AC Adapter cord inside the molded channel. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE 5. Plug the telephone cord into the modular jack on the wall. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. 13
ページ14に含まれる内容の要旨
Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the Base Unit and Handset. • Use #10 screws with anchoring devices suitable for the wall material where the
ページ15に含まれる内容の要旨
4. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 5. Place the AC Adapter cord inside the molded channel. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE 6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 15
ページ16に含まれる内容の要旨
8. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset Retainer on the Base Unit, and slide the tab out. 25 CHANNEL 2. Flip the retainer over so the tab
ページ17に含まれる内容の要旨
3. Put the retainer back into its slot on the Base Unit. 25 CHANNEL 4. Push down on the Handset Retainer until it snaps into place. 25 CHANNEL 17
ページ18に含まれる内容の要旨
This page intentionally blank. 18
ページ19に含まれる内容の要旨
SettingUpYourPhone Extending the Base Unit Antenna Before using your phone, be sure to raise the antenna to the vertical position. Installing the Handset Battery Pack 1. Press in on the Battery Cover Release. 2. Slide the battery compartment cover down. 19
ページ20に含まれる内容の要旨
3. Align the plastic connector of the Nickel-Cadmium battery pack with its socket and plug it in. Note: The black lead will be on the left when the plug is properly aligned. 4. Place the battery pack inside the battery compartment, and slide the battery cover back on. Note: The built-in Memory Backup feature allows up to 3 minutes to disconnect the old battery pack and install a new one without losing any numbers stored in memory. 20
