ページ1に含まれる内容の要旨
DXAI 4288-2
ページ2に含まれる内容の要旨
Contents Selecting a Different Channel 22 Welcome/Features 2 Find Handsets 22 Controls and Functions 3 Using Call Waiting 23 Terms Used in this Manual 5 Using the Speed Dial Memory 24 Accessibility 6 Storing Names and Numbers in Speed Dial Memory 24 Installing the Phone 7 Storing Caller ID Messages in Speed Dial Memory 27 A. Choose the Best Location 7 Making Calls from Speed Dial Memory 28 B. Install the Rechargeable Battery Packs into the Handsets 8 Caller ID and CIDCW (Caller ID on Call C. Co
ページ3に含まれる内容の要旨
Congratulations on your purchase of the Uniden dual handset cordless telephone and answering Welcome system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note:Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless phone may vary. • 2.4GHz Extended Range Technology � 10 Number Memory Dialing Features � Dual Handset Syste
ページ4に含まれる内容の要旨
CONTROLS & FUNCTIONS Controls and Functions 1. Handset antenna Handsets 2. Jack for optional headset 3. Beltclip hole 1 4. Ringer speaker 5. Handset battery compartment 6. Handset earpiece 7. LCD display 2 6 8. / /vol/ (earpiece volume, ringer volume and scroll) key (pages 15, 18 and 21) 3 9. Call id/menu key (pages 15 and 29) 7 10. /tone/ key (left cursor) * 8 (pages 21 and 24) 4 13 11. Redial/pause key (pages 20 and 26) 9 14 12. Select/channel key (pages 15, 22 and 24) 15 13. Talk/flash key
ページ5に含まれる内容の要旨
CONTROLS & FUNCTIONS Main Base 20. DC IN 9V jack 21. Main base antenna 22. Telephone line jack 23. Main base speaker 24. (play/stop) key (pages 42 and 44) 20 22 25. (repeat/rewind) key (page 45) 26. Main base charging contacts 27. Menu/clock key (pages 34 and 37) 21 28. Mic (microphone) 29. Ringer key (page 42) 30. Memo rec (record) key (page 48) 31. Greeting key (page 41) 23 32. Charge/in use LED 32 33. (delete) key (page 47) 24 33 34. (skip/fast forward) key (page 46) 25 34 35 35. (answer on/
ページ6に含まれる内容の要旨
TERMS USE D IN THI S MANUAL Extra Charging Cradle for Second Handset 39. Charging contacts 40. Charge LED 41. DC IN 9V jack 41 39 40 Terms Used in this Manual � Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. � Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. � CID - Caller ID � CIDCW - Caller ID on Call Waiting www.uniden.com [5] TERMS US
ページ7に含まれる内容の要旨
ACCESSIBILITY Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we will call you back. Information is also available on our
ページ8に含まれる内容の要旨
INSTAL LI N G THE PH ONE Installing the Phone Do the following steps: note A. Choose the Best Location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets If your home has specially wired alarm D. Mount the Main Base on a Wall equipment connected to A. Choose the Best Location the telephone line, be When choosing a location for your new phone, here are some important guidelines you should consider: sure that instal
ページ9に含まれる内容の要旨
INSTAL LI N G THE PH ONE B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in ! the main base or charging cradle. Use only the Uniden 1) Press down on the handset battery case cover (use the finger (BT-905 or BT-1006) indention for a better grip) and slide the cover downward to rechargeable battery remove. pack supplied with your cordless 2) Plug the battery
ページ10に含まれる内容の要旨
INSTAL LI N G THE PH ONE C. Connect the Main Base and Charging Cradle, and Charge the Handsets 1) Connect the AC adapter to the DC IN 9V jack and to a ! standard 120V AC wall outlet. 2) Place one handset in the main base and the other in the �Use only the supplied AD-314 AC adapter charging cradle with the keypad facing forward. for the main base and 3) Make sure the charge/in use LED and charge LED illuminate. AD-310 or AD-1010 for the charging If the LED does not illuminate, check to se
ページ11に含まれる内容の要旨
INSTAL LI N G THE PH ONE D. Mount the Main Base on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the AC adapter to the DC IN 9V jack. 2) Route the AC adapter cord through the molded wiring channel as shown. 3) Plug the AC adapter into a standard 6 120V AC wall outlet. 4) Plug the telephone line cord into the 5 1 TEL LINE jack. Route the cord through the molded wiring channel as shown. 6 5) Plug the telephone line cord into the telephon
ページ12に含まれる内容の要旨
INSTAL LI N G THE PH ONE Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: � Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. � Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. � Make sure the wall material is capable of supporting the weight of the main b
ページ13に含まれる内容の要旨
INSTAL LI N G THE PH ONE Headset Installation Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See page 53.) www.uniden.com INSTALLING THE PHONE [12]
ページ14に含まれる内容の要旨
REGIST ER HA NDS ETS T O TH E MAIN B A S E Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main base will automatically register to the note main base. The second handset (charging in the extra charging cradle) MUST also be registered to the �When you charge the main base before use. Follow the steps below to register the second handset. handsets, Caller ID summary screen and the name of the 1) Be sure both handsets are fully charged. handse
ページ15に含まれる内容の要旨
WH E N T O RE - REGISTE R HA NDS ETS When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 13) each time the digital note security code is changed. Refer to page 52 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a Make sure to return the move), both handsets will need to be re-registered. To re-registe
ページ16に含まれる内容の要旨
BAS I C SE TUP Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2. Activating Au
ページ17に含まれる内容の要旨
BAS I C SE TUP You must subscribe to Caller ID service through your local telephone provider to use this feature. 1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears. 2) Press the /vol/ key to select CIDCW. 3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode. Entering Your Area Code If you ca
ページ18に含まれる内容の要旨
BAS I C SE TUP 4) Use the number keys (0 - 9) to enter the 3-digit area code. If you make an error, use the delete/transfer key to backspace. note 5) Press the select/channel key. A confirmation tone sounds. If your phone system 6) Press the end key to complete the setting. The handset returns to standby mode. requires pulse dialing and you need to send DTMF tones during a Choosing the Dialing Mode call, you can Your phone can communicate with the telephone network in two different ways: to
ページ19に含まれる内容の要旨
BAS I C SE TUP Setting the Language You can change the language the menu display uses. Choose from English, French, or Spanish. 1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears. 2) Press the /vol/ key four times to select Language. 3) Press the select/channel key to select Eng, Fr. or Esp. 4) Press the end key to complete the setting. The handset returns to standby mode. Selecting the Ring Tone and Volume Your phone has five different rin
ページ20に含まれる内容の要旨
USIN G YOUR PHONE Using Your Phone note Making and Receiving Calls Making a call 1) Remove the handset from the cradle. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk/flash key. Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically To turn on the AutoTalk answer the call when you pick it up.) feature, see “Activating 2) Press the ta
