ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Welcome/Accessibility...................................................3 Using.the.Speed.Dial.Memory.....................................21 Storing a Name and Number in Memory .......................... 2 Terminology/Manual.Conventions................................4 Storing Caller ID in Speed Dial Memory ........................... 24 Product.Overview...........................................................5 Using.Your.Phone.........................................................
ページ3に含まれる内容の要旨
Setting the Number of Rings ............................................. 43 Activating the Message Alert ............................................ 44 Setting a Security Code or Personal Identification Number (PIN) .............................................................. 44 Setting Your Outgoing Message (Greeting) ...................... 45 Using.Your.Answering.Machine..................................47 Turning the Answering Machine On/Off ............................ 47 Reviewing Mes
ページ4に含まれる内容の要旨
Welcome Congratulations on purchasing your new Uniden Corded/Cordless Telephone! Your new phone system comes with a corded base unit and a cordless handset. The corded base allows you the convenience, safety, security and making and receiving calls during a power failure. In addition to the corded base, your new phone has a full featured cordless handset and charger that can be placed anywhere in your home where you have AC power and it does not require you to plug the handset in to a teleph
ページ5に含まれる内容の要旨
Terminology Base The main part of the phone that connects Corded. A handset connected to the base. It can to your phone line and lets you make and Handset.on. make and receive calls during a power receive calls. the.Base failure. Charger A cradle that charges the handset battery. Handset A cordless handset that can be placed It connects to power but does not connect anywhere in your home or office where to a phone line. AC power is available. CID Caller ID is available from your telephone St
ページ6に含まれる内容の要旨
Product.Overview Main.Phone.Features • 5.8GHz Extended Range Technology • Do Not Disturb (DND) Feature • Corded/Cordless Telephone System • Clock Display in the Base • Make and Receive Calls During a Power Failure • Hold Feature • Dual Keypad and Backlit Screens • Last Number Redial • Caller ID and Caller ID on Call Waiting • Tone/Pulse Dialing • 50 Number Caller ID List in the Base and Handset • Page/Find Handset Key • 0 Speed Dial Numbers in the Base and Handset • Earpiece/Ringer Volume Con
ページ7に含まれる内容の要旨
Controls.and.Functions Main.Base.Unit . Corded base handset 2. [clock /menu] key 11 12 13 14 15 16 2. in.use LED 3. LCD display 3. message LED 4. [ ] (repeat/rewind) key 1 17 4. [answer on/off] key 5. [ ] (play/stop) key and LED 6. [ ] (delete) key 2 18 5. [greet] key 7. [ ] (skip/fast forward) key 3 19 6. Base speaker 8. [set] key 4 7. [dnd] (do not disturb) key 9. [mem] (memory) key 20 5 and LED 20. [cid.select/ ] (up) and 6 21 8. [hold] key and LED [cid.select/ ] (down) keys 7
ページ8に含まれる内容の要旨
Handset Charger 1 23 21 6 2 22 7 8 .. Handset antenna Handset antenna 3. 3. [select/int’com] [select/int’com] 9 3 14 2. 2. Belt clip hole Belt clip hole (select/intercom) key (select/intercom) key 4 10 15 3. 3. Jack for optional headset Jack for optional headset 4. 4. [talk/flash] [talk/flash] key key 4. 4. Handset ringer speaker Handset ringer speaker 5. 5. [end] [end] key key 5. 5. Handset battery Handset battery 6. 6. [#/ [#/ ] ] (right cursor) key (right cursor) key
ページ9に含まれる内容の要旨
Using.the.Interface Using.the.Base.Menus • Press [clock/menu] on the base to access the base main menu. • Use [cid.select/ ] or [cid.select/ ] to scroll through options. • Press [set] on the base to make a selection. • For your convenience, voice prompts will guide you through the base main menu (except LCD Contrast and Dial Mode settings). • To cancel your selection and return to standby, press [ ] (play/stop) on the base. • If you do not press a key within thirty seconds, the phone will time
ページ10に含まれる内容の要旨
Installing.the.Phone Choosing.the.Best.Location Before choosing a location for your new phone, here are some important guidelines you should consider: Avoid heat sources, such as radiators, Avoid noise sources such as a window by air ducts, and sunlight a street with heavy traffic Avoid television sets and other Avoid microwave ovens electronic equipment Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Choose a central location Avoid personal computers A
ページ11に含まれる内容の要旨
Connecting.the.Base.and.Corded.Handset ) Connect the corded handset curl cord to the left side of the phone and to the corded handset. 2) Route the curl cord inside the molded wiring channel as shown. 3) Connect the AC adapter to the DC.IN.9V jack and to a standard 20V AC wall outlet. CAUTION: To avoid risk of fire and shock, only use the Uniden.AD-314.AC.adapter. 4) Route the AC adapter cord inside the molded wiring channel as shown. 5) Connect the AC adapter to a continuous power supply
ページ12に含まれる内容の要旨
Testing.the.Connection There’s an easy way to test your connection: try making a call from your base. If your call connects, your phone’s settings are fine. If your call does not connect: ) Check the AC adapter cord. Make sure it is securely connected to the DC.IN.9V connector and to a standard AC power outlet. 2) Change Dial Mode (Instructions below). Changing.the.Dial.Mode Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days
ページ13に含まれる内容の要旨
Mounting.the.Base.Unit.on.a.Wall Standard.wall.plate.mounting This phone can be mounted on any standard wall plate. ) Remove the wall mount adapter from the base and snap it into the notches on the bottom of the base. 2) Plug the AC adapter to the DC.IN.9V jack. CAUTION: To avoid risk of fire and shock, only use.the.Uniden.AD-314.AC.adapter. 3) Route the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 20V AC wall outlet. 5) Plug the telepho
ページ14に含まれる内容の要旨
Direct.wall.mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within five feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screw
ページ15に含まれる内容の要旨
Installing.the.Rechargeable.Battery.Pack.for.Cordless.Handset The handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the cordless handset is placed in the charger. To install the rechargeable battery pack: 1) Press down on the cordless handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery
ページ16に含まれる内容の要旨
Connecting.the.Cordless.Handset.and.Charger The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger. ) Connect the AC adapter to the DC.IN.9V jack and to a standard 20V AC wall outlet. CAUTION:.Use.only.the.Uniden.AD-310.or.AD-1010.AC.adapter. 2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. 3) Make sure that the charge light illuminates. If the
ページ17に含まれる内容の要旨
Installing.the.Belt.Clip To.attach.the.belt.clip Insert the belt clip into the holes on each side of the handset. Press down until it clicks. To.remove.the.belt.clip Pull both sides of the belt clip to release the tabs from the holes. Headset.Installation Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by
ページ18に含まれる内容の要旨
Base.Setup Setting.the.Day.and.Time To set the day and time on your phone, do the following: ) When the phone is in standby, press [clock/menu] on the base. DDaayy:: SSuunnddaayy 2) Press [set] to select TIME. The system announces "Time", the current time and PPrreessss // oorr sseett 00 the voice guidance for setting the time. 3) Press [cid.select/ ] or [cid.select/ ] to select the day of the week, and then press [set]. 4) Enter a two-digit number (01-12) to set hou
ページ19に含まれる内容の要旨
Setting.Caller.ID.on.Call.Waiting.(CIDCW) Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while you are on the line. ) When the phone is in standby, press [clock/menu] on the base. CCIIDDCCWW:: OOnn 2) Press [cid.select/ ] to move the pointer to select CIDCW, and then press [set]. 00 PPrreessss // oorr sseett 3) Press [cid.select/ ] or [cid.select/ ] to select ON or OFF, and then press [set]. You will hear a confirmation to
ページ20に含まれる内容の要旨
Adjusting.the.Base.Display.(LCD.Contrast) You can adjust the contrast or brightness of the text that appears on your base display. Choose one of ten levels for optimum viewing. ) When the phone is in standby, press [clock/menu] on the base. LLCCDD CCoonnttrraasstt:: LLeevveell 55 2) Press [cid.select/ ] to move the pointer to select LCD CONTRAST and then PPrreessss // oorr sseett 00 press [set]. 3) Press [cid.select/ ] or [cid.select/ ] to adjust the contrast of th
