ページ1に含まれる内容の要旨
...
...
D1660 Series User's Guide
What's in the box? You will also find:
Accessory handset
D1660 base with
and charger
cordless handset
Not pictured:
x Rechargeable
battery (BT-1021)
x Battery cover
x AC adapter
(PS-0035)
You should
If you purchased
model number: have:
D1660 None
D1660-2 1 of each
Battery
D1660-11 10 of each
Not pictured:
cover
D1660-12 11 of each
x Rechargeable
battery (BT-1021)
* If the model number ends in R,
x AC adapter (PS-0035)
your package includes a DRX100
x T
ページ2に含まれる内容の要旨
What’s in the manual? Chain Dialing ...............................................11 Getting Started .................................. 3 Installing Your Phone .................................3 Voice Message Notification ....................11 Getting to Know Your Phone ...................4 Important Information .................... 12 Using the Handset Menu ..........................6 Solving Problems .......................................12 Using Your Phone ............................... 7
ページ3に含まれる内容の要旨
GETTING STARTED Connect the Telephone Cord Installing Your Phone Use the telephone cord to connect Charge the Battery the jack on the base to a TEL LINE 1. Unpack all handsets, standard telephone wall jack. battery Test the Connection packs, and battery 1. Pick up the handset and press covers. If Talk . The handset sounds a dial you need to tone, and the display shows Talk. remove a – If you don't hear a dial tone or cover, press in on the notch and the display says Check Tel Line,
ページ4に含まれる内容の要旨
Getting to Know Your Phone Parts of the Base Key What it does Find In standby: page all hs handsets. F F FI I IN N ND D D H H HS S S Find Charging Handset Contacts Parts of the Handset Twelve-key MENU/ INTERCOM/ SELECT dial pad UP END CID CLEAR MESSAGE/ MUTE Charging contacts Microphone PHONEBOOK SPEAKER TALK/FLASH DOWN REDIAL/PAUSE Key (icon) What it does x In standby or during a call: open the phonebook. PhonEbook x In the menu: go back to the previous screen. ( ) x When entering tex
ページ5に含まれる内容の要旨
Key (icon) What it does x In standby: open the menu. MEnu/sEE l cT x In any menu or list: select the highlighted item. x During a call: hang up. End x In any menu or list: exit and go to standby. x In standby or during a call: open the Caller ID list. cid x When entering text: move the cursor to the right. x In standby: start an intercom call. inTEM rco / x During a call: put the call on hold and start a call transfer. E cl ar x When entering text or numbers: erase the character at the cursor (
ページ6に含まれる内容の要旨
Using the Handset Menu MENU/SELECT Press to If you don't press any keys for about 30 seconds, open the menu. the handset exits the Press MENU/SELECT to choose Handset Setup menu. the current option. During a call, use Date & Time Handset Setup Phon Ebook to Press back out of T-coil PHONEBOOK to Handset Setup UP DOWN Use and to go back a screen the menu Ringer Tones rotate through the Handset Setup OR without options. END press to exit Personal Ring hanging up. the menu
ページ7に含まれる内容の要旨
Global Setup Menu The settings on this menu affect all handsets. Only one handset at a time can change these menu options. Menu Option What it does Dial Mode Choose tone or pulse dialing (see p. 3). Enter, edit, or delete the access number for voice mail Edit Voice Mail service (see p. 12). Do not change this setting unless instructed to by Set Line Mode customer service. Change the way your phone communicates with a Voice Mail Tone voice mail system (see p. 12). VMWI Reset Reset the Voice
ページ8に含まれる内容の要旨
Finding a Lost Handset Find hs With the phone in standby, press on the base. All handsets beep for 1 minute; to cancel, press Find hs again or press any handset key. Changing the Volume u P down You can adjust each handset’s volume independently. Press or to increase or decrease the earpiece or speaker volume when you are on a call. You can adjust the ringer volume only when the phone is in standby. # Turning the ringer volume all the way down turns off the ringer. Using the Caller ID and
ページ9に含まれる内容の要旨
Using Call Waiting ♦ Call Waiting, a service available from your telephone provider, lets you receive calls while you are on another call. Caller ID on Call Waiting (CIDCW) service displays Caller ID information for a waiting call. ♦ If you get a Call Waiting call, the phone sounds a tone and displays any Talk/ Flash CID information received from the waiting call. Press to switch between the current call and the waiting call; each time you switch, there is a short pause before you're conne
ページ10に含まれる内容の要旨
1. With the phone in standby, press and hold # on any handset. The phone prompts you to select the number of hours (1 - 9 or Always On) that you want it to stay in silent mode. # 2. To confirm, press or just wait about 5 seconds. The phone displays Silent Mode On on each handset. 3. After the selected number of hours, the phone automatically exits silent mode. To exit silent mode manually, press and hold # again. Multihandset Features # To use the features in this section, you need at leas
ページ11に含まれる内容の要旨
Privacy Mode MEn/ u s El Ec T ♦ With a call in progress, press twice to activate Privacy mode. As long as privacy mode is on, you’ll see a in the display, and no other handsets can join your call. ♦ Privacy mode turns off automatically when you hang up or put the call on MEn/ u s El Ec T hold; you can also turn it off by pressing twice. Handset to Handset Intercom ♦ Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line. ♦ You can ma
ページ12に含まれる内容の要旨
messages with one key touch. Contact your voice mail provider for more information. Setting the Voice Mail Tone The voice mail feature supports both Stutter Dial Tone (SDT) and Frequency-Shift Keying (FSK) notification signals. With the phone in standby, open the menu, and select Global Setup. Select Voice Mail Tone, and choose Off if your service uses FSK signals; if your service uses SDT signals, choose On. Entering your Voice Mail Access Number With the phone in standby, open the menu
ページ13に含まれる内容の要旨
General problems Possible solutions x Make sure the ringer is turned on. A handset can make calls, but it won’t ring. x Make sure Silent Mode is turned off (see p. 9). x Charge the battery for 15-20 hours. A handset is not working. x Check the battery connection. The phone keeps ringing x You may have to change the line mode. when I answer on an Contact Customer Service for instructions. extension. Audio issues Possible solutions x Move the handset closer to the base or Range Enhancer. Call
ページ14に含まれる内容の要旨
Voice mail issues Possible solutions The new message icon doesn’t turn off x Reset the Voice Message after I’ve listened to all my messages. Indicator (see p. 13). Installing a Line Filter or DSL Filter A telephone line filter or DSL filter prevents services that use the phone line from causing interference on your phone. To get a line filter, contact your service provider or look in an electronics store. Plug the filter into the telephone wall jack and plug the base into the filter. Make
ページ15に含まれる内容の要旨
x As part of our commitment to protecting # If you don’t hear a dial tone our environment and or the display says Registration conserving natural Failed, charge the battery resources, Uniden completely, then try again. voluntarily participates in an RBRC® industry Adapter and Battery program to collect and recycle used Ni-MH Information batteries within the United States. Please AC Adapter for Base and Charger call 1-800-8-BATTERY for information Part number PS-0035 on Ni-MH batter
ページ16に含まれる内容の要旨
If you experience trouble with this equip- phone cord and modular plug is provided ment, contact the manufacturer (see the with this product. It is designed to be cover of this manual for contact informa- connected to a compatible modular jack tion) or an authorized agent. If the equip- that is also compliant. See installation ment is causing harm to the telephone instructions for details. network, the telephone company may The REN is used to determine the request that you disconnect the
ページ17に含まれる内容の要旨
accordance with the instructions, may Industry Canada (I.C.) Notice cause harmful interference to radio Terminal equipment communications. However, there is no NOTICE: This equipment meets the guarantee that interference will not occur applicable Industry Canada Terminal in a particular installation. If this equip- Equipment Technical Specifications. This ment does cause harmful interference to is confirmed by the registration number. radio or television reception, which can The abbrev
ページ18に含まれる内容の要旨
OR PAYMENT OF INCIDENTAL OR craftsmanship with only the limitations or CONSEQUENTIAL DAMAGES. Some exclusions set out below. states do not allow this exclusion or WARRANTY DURATION: This warranty limitation of incidental or consequential to the original user shall terminate and damages so the above limitation or exclu- be of no further effect 12 months after the sion may not apply to you. date of original retail sale. The warranty is invalid if the Product is (A) damaged LEGAL REMEDIES
