ページ1に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page i
INSTRUCTION MANUAL
CLT-D5880
CLT-D5882
CLT-D5883
5.8-GHz Cordless Telephone
with Caller ID & Visual Call Waiting
IMPORTANT
Charge the handset battery pack for a full 15-20 hours before using your
cordless handset for the first time.
SANYO Canada Inc.
www.sanyo.ca
ページ2に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page ii Introduction Congratulations on your purchase of the CLT-D5880/CLT-D5882/CLT-D5883 cordless telephone from SANYO. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 5.8 GHz technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features 5.8GHz Digital Expandable Hands-Free Duplex Speakerphone in the Handset Caller ID/Call Waiting Delux
ページ3に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 1 CONTENTS Getting Started Introduction...................inside front cover CALLER ID FEATURES Features.........................inside front cover Caller ID and CIDCW Controls and Functions...........................E2 (Caller ID on Call Waiting)....................E39 Viewing the Caller ID List.....................E41 Using the GETTING STARTED Deleting a Caller ID Message .............E42 Interface Checking the Package Contents...........E4 Using t
ページ4に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 2 Controls and Functions 1 5 13 6 2 7 3 8 END 14 TALK FLASH 15 VOL CID 9 16 1 3DEF 2ABC 4GHI 6MNO 5JKL 4 PQRS WXYZ 7 8TUV 9 TONE 10 0OPER 17 11 18 SPEAKER INTCM /HOLD 12 19 20 1. Handset Antenna 11. SPEAKER 2. Beltclip Hole 12. INTCM (intercom) /HOLD 13. Headset Jack Cover 3. Speakerphone Speaker and Ringer 14. TALK/FLASH 4. Handset Battery Compartment 15. END 5. New Message LED 16. CID (Caller ID) 6. Handset Earpiece 17. #/ (right cursor) 7. LCD Dis
ページ5に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 3 22 23 21 24 25 26 21. Base Charging Contacts 24. PAGE 22. Base Antenna 25. DC IN 9V Jack 23. Base CHARGE LED 26. TEL LINE Jack 29 27 28 For multi-handset packs only 27. Charging Contacts 28. Charger CHARGE LED 29. DC IN 9V Jack E3
ページ6に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 4 GETTING STARTED Checking the Package Contents Make sure you have received the following items in the package. For CLT-D5880 For CLT-D5882 For CLT-D5883 • Base unit (1) • Base unit (1) • Base unit (1) • AC adapter (1) • AC adapters (2) • AC adapters (3) • Telephone cord (1) • Telephone cord (1) • Telephone cord (1) • Handset (1) • Handsets (2) • Handsets (3) • Rechargeable battery (1) • Rechargeable batteries (2) • Rechargeable batteries (3) • This
ページ7に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 5 GETTING STARTED B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit or charging cradle. IMPORTANT Use only the SANYO rechargeable battery pack supplied with your cordless telephone. Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time! To maximiz
ページ8に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 6 GETTING STARTED Low Battery Alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, ¨Low Battery¨ appears on the LCD and none of the keys will operate. If the phone is in use, ¨Low Battery¨ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. Note: • Even when
ページ9に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 7 GETTING STARTED C. Connect the base unit and charge the handset 1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2 Set the base on a desk or tabletop. 3 Place the handset in the base unit for 15-20 hours without interruption. The base unit’s LED light (labeled CHARGE) illuminates once the handset is placed in the base. The LED light will illuminate whether the battery pack is connected or not. If the base CHARGE
ページ10に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 8 GETTING STARTED 4 Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. To telephone line outlet To TEL LINE Telephone line cord (supplied) Tip: If your telephone outlet isn't modular, contact your telephone Modular company for assistance. Connecting the Charger (for CLT-D5882/CLT-D5883) 1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2 Se
ページ11に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 9 GETTING STARTED Mounting the Base Unit On a Wall Standard Wall Plate Mounting This phone can be mounted on any standard wall plate. 1 Put the AC adapter and the telephone line cord through the hole on the wall mount adapter. 2 Plug the AC adapter into the DC IN 9V jack. 3 Plug the telephone line cord into the TEL LINE jack. 4 Slide the wall mount adapter into the notches on the base. 5 Plug the AC adapter into a standard 120V AC wall outlet. Hook
ページ12に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 10 GETTING STARTED Direct Wall Mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cable lengths. • Make sure the wall material is capable of
ページ13に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 11 USING THE INTERFACE Display and Icons Example of the standby mode display Ringer off icon (when the ringer is off) / day of the week and time / battery icon SUN 12:00A Handset #1 Handset ID New CID: 5 Number of new Caller ID calls received REDIAL MENU (If there are no new Caller ID messages, the Handset ID appears here.) Icon Appears During Description Battery icons indicate the handset battery status. This icon changes depending on Stan
ページ14に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 12 USING THE INTERFACE Animation Displays The handsets have a variety of animation displays. Below are examples of the animation screens and what they mean: Turning on the phone Hanging up the phone Confirmation (Done!) 1:53 Welcome! End Done! Please Wait... REDIAL MENU Find Handset/ Deleting (Deleted!) Making a call Paging the Handset Talk Paging Deleted! 1:54 MUTE CWDX PRIVACY Also, the animation display
ページ15に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 13 USING THE INTERFACE Soft Key Function "Soft" keys are keys that change function during the operation of the phone. There are three soft keys on each handset. Soft Keys allow you to: - Access the main menu - Access stored Caller ID messages - Set up CIDCW options (Caller ID on Call Waiting) - Redial one of the last three numbers dialed from the handset - Store or edit phone numbers - Access Voice mail waiting Note: The soft keys will not appear whi
ページ16に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 14 USING USING THE INTERF THE INTERFACE ACE Main Menu Options Your phone has five main menu options: Walkie-Talkie Mode, Room/Baby Monitor, Handset Setup, Global Setup and Deregister HS. Default Settings The default settings set from the factory match the features that most people use. You may not need to change them. However, there are a number of options you must set and entries you must make in memory to take full advantage of all the phone featur
ページ17に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 15 USING THE INTERFACE Setting Menu Options Below are some tips for using the software interface on your phone. • Press the MENU soft key to access the main menu. • Use VOL/ and VOL/ to scroll through options. DirectLink Mode Room Monitor • Press the OK soft key to make a selection. Handset Setup BACK BACK OK • Press the BACK soft key to return to the previous screen. • Press END to exit the menu. Walkie-Talkie Mode In Walkie-Talkie mode, a pair of
ページ18に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 16 USING THE INTERFACE Room/Baby Monitor This feature allows you to monitor sounds in another room. Place a handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room. Using Room/Baby Monitor 1 Press the MENU soft key and select the Room Monitor menu. To Room Monitor appears. 2 Select the handset you want to monitor by using VOL/ o
ページ19に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 17 USING THE INTERFACE Handset Setup The following submenu options must be set separately for each handset. Programming your Voice Mail Access Number 1 Press the MENU soft key. Select the Handset Setup Edit V_mail No. 1234567890 menu, and then the Edit Voice Mail submenu. Edit V_mail No. appears. DELETE PAUSE OK 2 Enter your personal access number using the number keypad (0-9), /TONE/ , #/ , the DELETE soft key, or the PAUSE soft key (up to 20 digits
ページ20に含まれる内容の要旨
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 18 USING THE INTERFACE Distinctive Ringer Setup Distinctive Ringer allows you to assign a designated ring tone to a stored phonebook number (100 stored locations available). When a call is received and the Caller ID information matches the information in one of the phonebook memory locations, the phone uses the distinctive ring assigned to that particular caller. You can assign distinctive rings to multiple phonebook memory locations. Switching the s
