ページ1に含まれる内容の要旨
User’s Guide
43-325, 43-326
Caller ID Cordless Phone
43-326 only
43-325 and 43-326
Thank you for purchasing your new cordless phone from RadioShack. Please
read this user’s guide before installing, setting up, and using your new phone.
ページ2に含まれる内容の要旨
Contents Contents Package Contents .........................................................................................4 Dial a Directory Entry ...................................................................................22 Features ...........................................................................................................4 Edit a Directory Entry ...................................................................................23 Delete from the Directory ...........
ページ3に含まれる内容の要旨
Telephone Setup User’s Guide Package Contents Telephone Setup Telephone Base and Charger Installation Install the telephone base and chargers as shown below. Make sure that the electrical outlet is not controlled by a wall switch. Handset n Notes: charger • If you subscribe to digital subscriber line (DSL) high-speed Internet 43-326 qty. 1 Wall bracket Telephone base service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wal
ページ4に含まれる内容の要旨
Telephone Setup n Notes: Battery Installation and Charging • When the screen shows LOW BATTERY, the backlight is off. Install the battery as shown below. For best performance, charge the • If the handset will not be used for a long time, disconnect and remove handset for at least 16 hours before use. When not in use, place the handset the battery to prevent possible leakage. in the telephone base or charger. See page 32 for battery operating times. • To purchase replacement batteries, visit
ページ5に含まれる内容の要旨
Telephone Setup Wall Mount Installation Telephone Base Layout 1. Position the telephone base as shown below. Insert the extended tabs (marked B) of the wall bracket into the slots on the back of the telephone base (marked B). Push the telephone base down until it clicks into place. 2. If you are using a DSL filter, plug the line cord into the filter now. Route the telephone line cord (or DSL filter) through the wall bracket hole. Route the power cord out of the bottom of the telephone. 3. P
ページ6に含まれる内容の要旨
Telephone Setup Handset Layout (Directory) • Press to enter the directory when the telephone is not in use. • While in a menu, press to scroll up. • During a call, press to raise the listening volume. CID (Caller ID) • Press to review the call log when the telephone is not in use. • While in a menu, press to scroll down. • During a call, press to lower the listening volume. CHARGE light On when the handset is charging in the telephone base or charger. MENU/SELECT (Speakerphone) • Press
ページ7に含まれる内容の要旨
Telephone Setup Handset Ringer Volume LCD Language You can set the ringer volume or turn the ringer off. You can select ENGLISH, FRANÇAIS or ESPAÑOL to >>L LC CD D L LA AN NG GU UA AG GE E >>R RIIN NG GE ER R V VO OL LU UM ME E be used in all screen displays. S SE ET T D DA AT TE E/ /T TIIM ME E 1. Press MENU/SELECT to show the menu. R RIIN NG GE ER R T TO ON NE E 1. Press MENU/SELECT to show the menu. 2. Press or to select >RINGER VOLUME, then press MENU/SELECT. 2 Press or
ページ8に含まれる内容の要旨
Telephone Operation Home Area Code Telephone Operation If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call Make a Call within your local area, the telephone number is automatically stored without Press /FLASH or . You will hear a dial tone. the area code in the call log. Dial the number. 1. Press MENU/SELECT to show the menu. >>H HO OM ME E A AR RE EA A C CO OD DE E 2. Press or to select >H
ページ9に含まれる内容の要旨
Telephone Operation few seconds. MUTE appears at the bottom of the To access a number in the call log while on a call: P PH HO ON NE E 0 0::0 00 0::0 00 0 screen until the mute function is turned off. M MU UT TE ED D 1. Press MENU/SELECT and then press or to highlight >CALL LOG. 2. Press MUTE/REMOVE again to resume the M MU UT TE E 2. Press MENU/SELECT to select. conversation. The handset screen temporarily 3. Scroll to the desired entry by pressing or . shows MICROPHONE ON. 4.
ページ10に含まれる内容の要旨
Telephone Operation n Notes: 2. To answer the intercom call, press /FLASH, , INT, or any dialing keys (0-9, #, *) on the other handset. Both handsets now show • If you want to cancel an intercom call and reconnect to the outside call INTERCOM. before the other handset answers, press /FLASH, or INT on your originating handset. 3. To end an intercom call, press INT, OFF/CLEAR, or place the handset • If the other handset does not answer the intercom call within 100 back in the telephone base o
ページ11に含まれる内容の要旨
Directory • Copy a number from the redial list by pressing REDIAL/PAUSE Directory and then , , or REDIAL/PAUSE to select a number. Press MENU/SELECT to copy the number. The directory can store up to 50 entries with up to 30 D DIIR RE EC CT TO OR RY Y E EM MP PT TY Y digits for each phone number and 15 characters for each 5. Press MENU/SELECT to move to the name. The screen shows name. ENTER NAME. • When there are no records in the directory, the 6. Use the dialing keys (see “C
ページ12に含まれる内容の要旨
Directory Search the Directory Edit a Directory Entry Use the following steps to edit an entry in the directory. Entries are sorted alphabetically. To search the >>R RE EV VIIE EW W directory: 1. Press when the handset is not in use. S ST TO OR RE E 1. Press when the handset is not in use. -OR- -OR- Press MENU/SELECT when the handset is not in use. Press or to select >DIRECTORY and then press MENU/SELECT twice. Press MENU/SELECT when the handset is not in R Ra ad diio
ページ13に含まれる内容の要旨
Call Log • XX MISSED CALL(S) shows when there are new call Call Log H HA AN ND DS SE ET T X X log entries (including missed and unreviewed calls). X XX X M MIIS SS SE ED D C CA AL LL LS S • CALL LOG EMPTY shows when there are no About Caller ID records in the call log. You can use this telephone with regular caller ID service or combined caller • Only one handset can review the call log at a time. C CA AL LL L L LO OG G E EM MP PT TY Y ID with call waiting. You can use the telephone
ページ14に含まれる内容の要旨
Call Log 3. Press or to select >REVIEW, then press MENU/SELECT. • Copy a number from the redial list by pressing REDIAL/PAUSE and then , , or REDIAL/PAUSE to select a number. Press 4. Press or to browse through the call log. MENU/SELECT to copy the number. • The name (if available), telephone number, date and time of all 4. Press MENU/SELECT to move to the name. incoming calls are shown on the screen. E ED DIIT T N NA AM ME E The screen displays EDIT NAME. • You hear a double be
ページ15に含まれる内容の要旨
Additional Info Call Log Display Screen Messages Additional Information Displays When Handset Display Screen Messages The caller is blocking the name. PRIVATE NAME The telephone number entered is already ALREADY SAVED PRIVATE NUMBER The caller is blocking the telephone number. stored in the directory. PRIVATE CALLER The caller is blocking the name and number. There are no call log entries. CALL LOG EMPTY This caller’s name is unavailable. UNKNOWN NAME Calling another handset. CALLING H
ページ16に含まれる内容の要旨
Additional Info MUTE is turned off and the person on the Handset and Telephone Base Indicators MICROPHONE ON other end can hear you. Handset Lights MUTED You have turned off the handset microphone. The other party cannot hear you but you can On when the handset speakerphone is in use. hear the other party. CHARGE On when the handset is charging in the telephone NEW VOICEMAIL There are new voicemail messages from your base or charger. telephone company. NO LINE There is no telephone lin
ページ17に含まれる内容の要旨
Additional Info Battery Expanding Your Telephone System It takes up to 16 hours for the battery to be fully charged. When it is fully The handsets provided with your telephone system are pre-registered. charged, you can expect the following performance: Each handset is assigned a number that shows on the handset display. Additional handsets registered to the telephone system are assigned in Operation Operating time sequential order. For instance, if the telephone system already has HANDSET
ページ18に含まれる内容の要旨
Additional Info Replace a Handset Troubleshooting If you want to replace a handset or re-assign the designated handset If you have difficulty with your telephone, please try the suggestions number of a registered handset, you must de-register all the handsets and below. For Customer Service, go to your local RadioShack store or visit then individually register each handset. www.RadioShack.com. To make de-registration easier, read all of the instructions on this page My telephone does not wo
ページ19に含まれる内容の要旨
Additional Info • If the handset is in the telephone base or charger but the CHARGE light devices such as: wireless routers, radios, cellular telephones, digital on the handset is not on, refer to “The CHARGE light is off” in this section. telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones. • If the battery is completely depleted, it can take up to 10 minutes to charge the handset before PLACE IN CHARGER or LOW BATTER
ページ20に含まれる内容の要旨
Additional Info There is interference during a telephone conversation. My caller ID features are not working properly. My calls fade out when I am using the cordless handset. • Caller ID is a subscription service. You must subscribe to this service • The handset might be out of range. Move it closer to the telephone from your local telephone company for this feature to work on your base. telephone. • If you subscribe to high-speed Internet service (digital subscriber line - • The caller might
