ページ1に含まれる内容の要旨
W1 Series
Water resistant DECT Cordless phone
Keep this user guide
for future reference
ページ2に含まれる内容の要旨
Content Content Pack Contents ...................................................................................................... 3 IMPORTANT SAFETY INFORMATION............................................................... 4 GETTING STARTED............................................................................................ 5 Key Layout............................................................................................................ 5 LCD display on the hands
ページ3に含まれる内容の要旨
OTHER FEATURES........................................................................................... 18 Key lock.............................................................................................................. 18 Shortcut to turn handset ringer on/off ................................................................. 18 Message waiting indication................................................................................. 18 Paging the handsets....................
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the mains supply and telephone socket during a storm. • Do not use the handset in a
ページ5に含まれる内容の要旨
GETTING STARTED Key Layout LCD Display Off / Exit Talk / Recall Phonebook Redial CID / CID / Scroll backward Scroll forward # / Keylock / / Pause Ringer On-Off Page Intercom / Program / Delete / Conference OK Mute 5
ページ6に含まれる内容の要旨
LCD display on the handset Base Ringer Handset Setting Recall Registration Ringer Setting duration programming Ringer Battery Signal Menu up/down Character Display Left Arrow Right Arrow Ringer Off Message Keylock Off hook Mute New CID waiting Phonebook The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringer. Use t
ページ7に含まれる内容の要旨
Basic steps to install 1. Connect the output plug of the mains adaptor to the adaptor socket on the back of the base unit and the mains adaptor to the wall mains supply. 2. Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall Figure 1 phone socket. 3. Insert 2AAA Ni-MH rechargeable batteries (supplied) into each handset, observing the correct polarity, into the battery compartment on the handset. (Figure 1)
ページ8に含まれる内容の要旨
Wall mounting the base and charger 1. Turn the base over. 2. Attach the mounting bracket to the base as indicated. Base 64mm Charger 48mm 3. The phone base units are suitable for wall mounting. Use two screws (not supplied) for fixing. Drill two holes horizontally side by side, 64mm apart for main base and 48mm for charger. Leave the screws protruding from the wall by 5mm. Now place the base over the screws and push gently d
ページ9に含まれる内容の要旨
charge. This is normal. A handset reaching a very low battery voltage level will go into sleep mode, displaying LOW BATT on the screen. It is good practice to replace the handset on the base unit to charge when it is not in use to ensure the handset is always fully charged. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Refer to the original type supplied with this phone. Ni-MH rechargeable batteries must be disposed of in accordance with applicable waste d
ページ10に含まれる内容の要旨
Making an external call Your phone allows you to dial out a phone number in various ways. Normal dialling 1. Press and wait for the dial tone. 2. Use the number pad to dial the phone number. The display shows the digits as you enter them. 3. When you enter more than 12 digits, turns on. In this case, you only see the last 12 digits on the screen. Predialing Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. Th
ページ11に含まれる内容の要旨
The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds (MM-SS) in the first hour. After that, it will be shown in hours and minutes (HH-MM) with the “-“blinking to indicate the seconds. When you end a call, the timer will be displayed for 5 more seconds before the screen returns to the handset label. Adjusting the volume Press or to adjust the receiver volume. The di
ページ12に含まれる内容の要旨
During a call, you will hear a loud tone the two loud beeps periodically to notify you of another incoming call. If you wish to answer this call 1. Press listen for dial tone then Press 2 to put the current call on hold and talk with the second caller. 2. Subsequent presses of listen for dial tone then Press 2 will toggle you between these 2 callers. Caller information of this second call will be stored in the call log. CALLER ID If you subscribe to you
ページ13に含まれる内容の要旨
2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to save it. The record is now saved into the phonebook. The original CID record in the call list will now show the new name t
ページ14に含まれる内容の要旨
3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to save it. You have saved the number as a phonebook record. This record in the redial list will now show the name that you have assigned to this number. Deleting a previously dialled number While you are viewing a previously dialed number, you can delete it by 1. Press DEL . 2. Press
ページ15に含まれる内容の要旨
6. Press OK to confirm number change. Repeat steps 1 to 6 to edit another record. Deleting a phonebook record 1. During standby mode, press . 2. Press or to search for the record that you would like to delete. Or you can use the number keys to jump directly to the record starting with the corresponding letters of that key. 3. Press OK to select the record to be deleted. Press OK repeatedly to view the rest of the record. 4. Press DEL to delete.
ページ16に含まれる内容の要旨
6. Press OK to confirm your selection. will turn on if the handset ringer is turned off. Base Ringer Melody & volume 1. Press PROG during standby and press or until you see flashing. 2. Press to select. OK 3. Press or to listen to and select from the 5 melodies. 4. Press OK to confirm your selection and you will be prompted to volume Setting. 5. Press or to listen to and select from the different volume levels. 6. Press OK to
ページ17に含まれる内容の要旨
3. Before you enter the PIN, press and hold on the base for 2 seconds until a registration tone is emitted. The base is now in the registration mode. (If the base is full and cannot take on any more handset, it will emit a reject tone instead. See the section of Deregister to delete a currently registered handset.) 4. Enter the PIN of the base and press OK . You will hear a confirmation tone if the registration is successful. The handset label and the handset number wil
ページ18に含まれる内容の要旨
OTHER FEATURES Key lock Press and hold during standby to lock the keypad. appears whenever keypad is locked. When the keypad is locked, you can still answer an incoming call by pressing . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again. when you see To unlock the keypad, press any key and then press OK PRESS OK. Shortcut to turn handset ringer on/off You can use this shortcut to turn on/off the handset
ページ19に含まれる内容の要旨
MULTI-HANDSET OPERATION You can use these useful features if you have 2 or more handsets registered to the base. Answering an internal call When you receive an intercom call, your handset will ring with blinking. You can see the calling handset number on the screen. If you press when the phone is ringing, the handset ringer will be turned off for this incoming internal call. Press to answer. Making an internal call When the phone is in standby, 1. Press
ページ20に含まれる内容の要旨
During the conference call, pressing CONF will put the external line on hold and you can talk to the other handset in private. Press and hold to establish the conference call again. CONF Any handset hangs up during a conference call will leave the other handset still connecting with the external call. TROUBLESHOOTING Are you having trouble with your phone? Here are some of the most common problems and solutions. Problems Solutions The phone does not work • Make
