ページ1に含まれる内容の要旨
®
Motorola S12
Digital Cordless Telephone
S1201, S1202, S1203 and S1204
Warning
Charge the handset for 24 hours before use.
ページ2に含まれる内容の要旨
Welcome... to your new Motorola S12 Digital Cordless Telephone! All handsets are fully cordless for locating anywhere within range. 50 Name and Number phonebook. Speakerphone for hands-free conversations. 1 Caller ID shows you whos calling and see details of the last 40 callers in a Calls list. Redial up to 10 of the last numbers called. Register up to 5 handsets to a single base and register each handset with up to 4 different bases. Make internal calls and transfer external call
ページ3に含まれる内容の要旨
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call, you need to set up your phone. Follow the simple instructions in Getting Started, on the next few pages. IMPORTANT Power Adaptor for the base Only use the telephone line cord supplied. Telephone line cord This equipment is not designed for making If you have purchased a S12 multiple pack you emergency telephone calls when the power fails. will also have the
ページ4に含まれる内容の要旨
3.8 Lock/unlock the keypad...................................16 1. Getting started ................................................6 3.9 Paging/Find handset........................................16 2. Getting to know your phone..........................9 4. Phonebook....................................................17 3. Using the phone............................................13 4.1 Store a name and number...............................17 3.1 Switch the handset on / off ...................
ページ5に含まれる内容の要旨
6.8 Eco mode ........................................................23 10. Help................................................................29 6.9 Default settings................................................24 11. General information .....................................31 7. Clock & alarm............................................... 24 7.1 Set the date.....................................................24 7.2 Set the time .....................................................24 7.3 Se
ページ6に含まれる内容の要旨
The line will hang up if the handset moves out of range of the 1. Getting started base. Move closer to the base. The handset will automatically reconnect to the base. IMPORTANT Do not place your S12 in the bathroom or other humid areas. Setting up IMPORTANT Location The base station must be plugged into the mains power at all You need to place your S12 base within 2 metres of the times. Do not connect the telephone line cord into the wall mains power and telephone wall sockets so that the c
ページ7に含まれる内容の要旨
Installing and charging the handset 1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH battery cells supplied. Please note the + and - markings inside the battery compartment and insert in the correct direction. 2. Clip the battery cover back into place. 3. If you are charging the batteries for the first time, place the handset on the base to charge for at least 24 hours continuously. 4. When the handset is fully charged, icon will 2. Remove th
ページ8に含まれる内容の要旨
Please do not use alkaline or non rechargeable batteries. It After charging your handset for the first time, subsequent may cause permanent damage to the product and void the charging time is about 68 hours a day. Batteries and warranty. handset may become warm during charging. This is normal. BATTERY LOW WARNING Date and time If icon flashes on the display and you hear a warning If you have subscribed to a Caller ID Service, the date and beep every minute during a call, you will need to r
ページ9に含まれる内容の要旨
A Earpiece 2. Getting to know your phone B Display See page 10 for an overview of the display icons. Overview of your handset C Up During a call, press to increase earpiece volume, page 14. When the phone is ringing, press to increase the handset ringer volume, page 20. Press to scroll through the menu options, redial list, calls list and phonebook entries. D Menu / OK Press to open the Menu, page 12. Press to select menu options and to confirm a displayed option. E Talk / Handsfree Press to swi
ページ10に含まれる内容の要旨
J Calls list / Down Display icons In standby mode, press to open the calls list, page 27. During a call, press to decrease earpiece volume, page 14. Flashes to indicate an incoming external call When the phone is ringing, press to decrease the handset External call in progress ringer volume, page 20. Press to scroll through the menu options, redial list, calls list Flashes to indicate an incoming internal call and phonebook entries. K End Call / Exit / Switch Handset on/off Internal call in pr
ページ11に含まれる内容の要旨
1 Flashes to indicate new calls list entries received Overview of the base 1 Answered call (when viewing the Calls list) 1 Unanswered call (when viewing the Calls list) Keypad is locked Displayed number is longer than 12 digits The approximate power levels of your battery are indicated as follows: Battery is fully charged Battery is partially charged Battery is running low APage In standby mode, press to ring the handset(s), page 17. Flashes when battery is almost fully discharged Press and ho
ページ12に含まれる内容の要旨
Navigating the menus Your S12 has an easy to use menu system. Each menu has a list of options, which you can see on the menu map on the following page. When the handset is switched on and in standby: 1. Press m to open the main menu. 2. Then use u or d buttons to scroll through the available options. 3. Press m to select an option. To return to the previous menu level, press B. To exit the menu and return to standby, press n. NOTE If no buttons are pressed for 20 seconds, the handset returns
ページ13に含まれる内容の要旨
Menu map PHONEBOOK SETUP HANDSET DATE - TIME REGISTER ADD ENTRY BASE VOLUME BEEP DATE SET SELECT BASE MODIFY ENTRY BASE MELODY INT RING VOL CLOCK SET REG BASE DELETE ENTRY DEL HANDSET EXT RING VOL ALARM SET PIN CODE INT MELODY DIAL MODE EXT MELODY RECALL AUTO ANSWER DEFAULT NAME ECO MODE LANGUAGE KEYLOCK ? Getting to know your phone 13
ページ14に含まれる内容の要旨
1. If the handset is off the base then press < to answer 3. Using the phone the call, or if the handset is on the base simply lift the NOTE handset to answer the call. Your handset will automatically time the duration of all NOTE external calls. The call timer will display after the first 15 If you prefer to press < when you lift up the handset to seconds of your call. When the call ends, the total duration answer a call, you will need to switch Auto answer off, see of your talk time is s
ページ15に含まれる内容の要旨
1. Press I followed by the number (1-5) of the handset During a call with an external caller: you want to call. 1. Press I followed by the handset number (1-5) that you 3.5.2 Receive an internal call want to establish a conference call. When you receive an internal call, icon flashes and the 2. When the other handset answers, press # to connect handset number that is calling you is displayed. all three callers to begin the conference call. 1. Press < to answer the call. icon is displayed.
ページ16に含まれる内容の要旨
3.6.2 Answer a call hands-free 3.7.2 Copy a Redial list number to the phonebook If the handset is on the base and auto answer is switched on, 1. Press S to open the Redial list. lift the handset and press <. 2. Scroll u or d to the entry you want. If the handset is off the base or auto answer is switched off, 3. Press m. press < twice to answer the call. The display shows ADD ?. 3.6.3 Switch to hands-free during a call 4. Press m again. During a call, press < to put the call on the loudspeake
ページ17に含まれる内容の要旨
3.7.4 Delete the entire Redial list 3.9 Paging/Find handset 1. Press S to open the Redial list. You can alert a handset user that they are wanted or locate a missing handset. 2. Press and hold B. The display shows DELETE ALL ?. Paging calls cannot be answered by a handset. 3. Press m to confirm or B to cancel. 1. Press a on the base. All handsets registered to the base will ring. 3.8 Lock/unlock the keypad 2. To stop the ringing, press a on the base again or press You can lock the keypad so
ページ18に含まれる内容の要旨
5. Press u or d to select the ringer melody you want and 4. Phonebook press m. You can store up to 50 names and numbers in the The display shows ADD ENTRY. phonebook. Names can be up to 12 characters long and numbers up to 24 digits. You can also select different ringer 6. Enter the next name and number entry that you wish to melodies for the phonebook entries. store in your phonebook or press B twice to return to standby. 4.1 Store a name and number ENTERING NAMES If you have subscribed t
ページ19に含まれる内容の要旨
2. Scroll u or d to the entry you want. 5. Press B to delete the number if required, then enter OR the new number and press m. Enter the first letter of the name to search alphabetically. 6. Scroll u or d to select a new ringer melody and press m. The first name that starts with this letter or the nearest The display shows ADD ENTRY. letter in the alphabet will be displayed. 7. Enter the next name and number entry you wish to store in Scroll u or d to the entry you want. your phonebook or
ページ20に含まれる内容の要旨
4. Press m to confirm or B to return to the previous menu. 5. Handset settings NOTE 5.1 Handset ringer volume If you subscribe to your network providers caller ID service, You can adjust the ring volume and set different volume calls from the numbers that you have stored in the levels for your internal and external calls. Choose from 5 phonebook will ring using the ringer melody you have set volume levels or Off. when you store the entry. 1. Press m, scroll d to HANDSET and press m. 5.3 Aut
