ページ1に含まれる内容の要旨
Motorola D1010 series
Digital Cordless Phone with
Answer Machine
Warning
Use only rechargeable batteries.
ページ2に含まれる内容の要旨
Welcome... to your new Motorola D1011 Digital Cordless Phone! All handsets fully cordless for locating anywhere within range. 100 Name and number phonebook. Copy phonebook entries between other handsets. Answer machine with 12 minutes digital recording time. Caller Display shows you whos calling and see details of the last 50 callers in a 1 Calls list. Register up to 5 handsets to a single base and register each handset with up to 4 different bases. Make internal calls, transfer
ページ3に含まれる内容の要旨
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in Getting Started, on the next few pages. IMPORTANT Only use the telephone line cord supplied. This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Got everything? D1011 handset D1011
ページ4に含まれる内容の要旨
1. Getting started................................................................................ 6 Enter a pause................................................................................. 15 View an entry ................................................................................. 15 Location............................................................................................ 6 Edit an entry ................................................................................... 1
ページ5に含まれる内容の要旨
Auto hang up.................................................................................. 21 Answer machine settings................................................................27 Display language ........................................................................... 21 Ring delay ...............................................................................27 Room Monitor on/off ...................................................................... 21 Remote access ...............
ページ6に含まれる内容の要旨
WHICH POWER ADAPTOR? 1. Getting started The power adaptor with a clear connector is for the base unit and the WARNING power adaptor with a red colour connector is for the charger unit. Do not place your D1011 in the bathroom or other humid areas. Connecting up the base Location You need to place your D1011 base within 2 metres of the mains power socket and telephone socket so that the cables will reach. Make sure it is at least 1 metre away from other electrical appliances to avoid interfere
ページ7に含まれる内容の要旨
2. Insert the 2 x AAA NiMH batteries supplied into the handset. Then Date and time slide the compartment cover into place. Providing you have subscribed to your networks Caller Display service, 3. Place the handset on the charger to charge for at least 24 hours. the date and time is set automatically for all handsets every time a call is When the handset is fully charged the icon will indicate that it is received. fully charged. The date and time is recorded with each answer machine messa
ページ8に含まれる内容の要旨
C Menu key 2. Getting to know your phone Enter the main menu. Select the option displayed on screen. Confirm menu option OK is displayed on screen. Overview of your handset D Redial / Scroll right / Clear / Mute Open the redial list. Scroll to the right. Delete characters on screen when entering names and numbers. Mute / unmute the microphone during a call. Go back to previous menu level BACK displayed on screen. E Call log / Scroll Up / Volume up Open the calls log. Scroll up through l
ページ9に含まれる内容の要旨
K # / Ringer off / Pause Phonebook is open. Press and hold to switch handset ringer on or off. The alarm clock has been set. When dialling or storing a number, press and hold to enter a pause (P). Dial a #. Handsfree mode. L Loudspeaker key Activate and deactivate the loudspeaker during a call. Handset ringer is off. WARNING Answer machine On. Off when answer machine is off. Flashes Handsfree activation can suddenly increase the volume in the earpiece to when you have new messages. Flash
ページ10に含まれる内容の要旨
E Skip back Overview of the base F Answer machine On/Off G Skip forward H Stop I Play J Delete Navigating the menus The basic steps of navigating through the menu and on-screen options. 1. From the standby screen, press m. The main menu is opened. 2. Use the u or d keys to scroll through the menu. 3. Soft key options OK and BACK are displayed. Press m to select OK and open a sub-menu or validate an option. Press BACK and go back to previous menu level, correct a character or cancel an action
ページ11に含まれる内容の要旨
Menu map PHONEBOOK CLOCK/ALARM PERSONAL SET ADVANCED SET ANSW MACHINE NEW ENTRY DATE & TIME HANDSET TONE RECALL TIME PLAY LIST ENTRY SET ALARM RING VOLUME DIAL MODE DELETE ALL ALARM TONE RING MELODY CALL BARRING RECORD MEMO EDIT ENTRY GROUP MELODY EASY CALL ANSWER MODE DELETE ENTRY KEY TONE REGISTRATION ANSW ON/OFF DELETE ALL FIRST RING SELECT BASE ANSW SETTING DIRECT MEM HANDSET NAME REGIST. BASE RING DELAY PB TRANSFER* AUTO PICK-UP UNREGISTER REMOTE ACC. AUTO HANG-UP PIN HS SCREENING
ページ12に含まれる内容の要旨
Answer a call 3. Using the phone 1. When the phone rings and flashes in the display, press < or Calls press v to answer the call via the loudspeaker. Make a call WARNING When the phone is ringing, avoid holding the earpiece too close to your 1. Press <. ear as it may damage your hearing. Handsfree activation can suddenly 2. Dial the telephone number. increase the volume in the earpiece to a very high level. Make sure the Pre-dial handset is not too close to your ear. 1. Enter the phone numb
ページ13に含まれる内容の要旨
End a call If more than two handsets are registered to the base, their numbers are displayed, e.g. 2345*. Enter the number of the handset you want to 1. Press >. call or press * to ring all handsets. After you hang up, the duration the phone is off-hook is displayed for 5 seconds. 2. Press > to hang up. NOTE NOTE If auto hang-up is on (see page 21) simply replace the handset on the If the handset does not belong to D1000/1010 range, this function may base to end the call. The default sett
ページ14に含まれる内容の要旨
NOTE 4. Phonebook The voicemail number is pre-stored only if the country where the phone was purchased offers a voicemail service. If the voicemail number is not The D1011 handset phonebook can store up to 100 names and numbers. pre-stored you can add a number, or overwrite the existing stored NOTE number. See page 16. Numbers can be up to 24 digits long and names up to 12 characters long. Dial your network voicemail service Entries are stored in alphabetical order. 1. Press and hold 1. View
ページ15に含まれる内容の要旨
NOTE Enter a pause Cancel storing an entry by pressing > at any time during the process. If your D1011 is connected to a switchboard, you may need to enter a pause in a stored number. This gives the switchboard time to get an Entering names outside line. A Pause is normally stored after the switchboard access Use the alphanumeric keypad to enter names in the phonebook. code (e.g. 9) For instance to enter the name Paul 1. When storing a number, press and hold # until the display shows P. You
ページ16に含まれる内容の要旨
5. Press m to confirm. One touch keys 6. Scroll u or d to select NO GROUP, GROUP A, B or C and press m to The keys 1 to 9 enable one touch dialling of entries stored in the confirm. phonebook. 7. Press > to return to standby. Dial a one touch number Delete an entry 1. Press and hold a number key 1 to 9. 1. Press d. - The number is displayed and dialled. 2. Scroll to the entry you want to delete and press m. 2. Press > to cancel the dialling and return to standby. 3. Scroll d to DELETE ENTRY an
ページ17に含まれる内容の要旨
2. Scroll u or d through the calls log. 5. Caller display and Calls list At the end of the log, you will hear a beep. If you have subscribed to Caller Line Identification (CLI), and provided the Press e to see the number. If the number has more than 12 identity of the caller is not withheld, the number of the caller will be digits, press e to see the rest of the number. displayed together with the date and time of the call (if provided by the 3. Press > to return to standby. network). NOTE N
ページ18に含まれる内容の要旨
Delete entire calls list Delete entire redial list 1. Press u then m. The most recent call is displayed. 1. Press e then press m. 2. Scroll d to DELETE ALL and press m. 2. Scroll d to DELETE ALL and press m. 3. Display shows CONFIRM?. Press m to confirm. Press > to return 3. Display shows CONFIRM?. Press m to confirm. Press > to return to standby. to standby. Redial The D1011 lets you redial any of the last 10 numbers called. Numbers can be up to 24 digits long. Redial the last number 1. Press
ページ19に含まれる内容の要旨
Set alarm melody 6. Clock & Alarm There are three alarm ringtones. If you subscribe to your networks Caller Identification service, the time on 1. Press m and scroll d to CLOCK/ALARM. your D1011 may be set automatically each time you receive a call, Press m. depending on your network provider. 2. Scroll d to ALARM TONE and press m. You can also set or adjust the time using the Clock & Alarm menu. - Melodies are played. 3. Scroll u or dand press m. Set date and time 1. Press m and scroll d
ページ20に含まれる内容の要旨
1. Press m, scroll d to PERSONAL SET and press m. 7. Personal settings 2. HANDSET TONE is displayed. Press m and scroll d to GROUP MELODY. Press m. Handset tones 3. Scroll u or d to select: GROUP A, B or C, then press m. WARNING 4. Press u or d to select the ringtone you want for the group and press When the phone is ringing, avoid holding the earpiece too close to your m. ear as it may damage your hearing. 5. Press > to return to standby. Ring volume Key tones on/off Choose from: Ringer Off,
