ページ1に含まれる内容の要旨
Motorola D1000 Series
For D1001, D1002, D1003 and D1004
Digital Cordless Phone
Warning
Use only rechargeable batteries.
ページ2に含まれる内容の要旨
Welcome... to your new Motorola D1000 Digital Cordless Phone! All handsets fully cordless for locating anywhere within range. 100 Name and number phonebook. Copy phonebook entries between other handsets. 1 Caller Display shows you whos calling and see details of the last 50 callers in a Calls list. Register up to 5 handsets to a single base and register each handset with up to 4 different bases. Make internal calls, transfer external calls, hold 3-way conversation between two inter
ページ3に含まれる内容の要旨
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in Getting Started, on the next few pages. IMPORTANT Only use the telephone line cord supplied. This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Got everything? D1000 handset D100
ページ4に含まれる内容の要旨
4.6 View an entry......................................................18 1. Getting started ................................................6 4.7 Edit an entry .......................................................18 2. Getting to know your phone..........................9 4.8 Delete an entry ...................................................18 4.9 Delete all entries.................................................19 3. Using the phone............................................14 4.10Copy ph
ページ5に含まれる内容の要旨
8.3 Call barring......................................................... 28 6. Clock & Alarm .............................................. 23 8.3.1 Switch call barring on/off ....................... 28 6.1 Set date and time ...............................................23 8.3.2 Set a number to be barred .................... 29 6.2 Set alarm............................................................24 8.4 Easy call............................................................. 29 6.3 Set alarm
ページ6に含まれる内容の要旨
If you are on a call, the line will hang up if the handset moves 1. Getting started out of range of the base. Move back within in range. The WARNING handset will automatically re-connect to the base. Do not place your D1000 in the bathroom or other humid Setting up areas. IMPORTANT Location The base station must be plugged into the mains power at all times. Do not connect the telephone line cord into the wall You need to place your D1000 base within 2 metres of the socket until the handset
ページ7に含まれる内容の要旨
the other end into the mains power wall socket and switch 3. Place the handset on the charger to charge for at least the power on. 24 hours. When the handset is fully charged the icon will indicate that it is fully charged. Connecting the handset and charger (Multi- 4. When the handset is fully charged after 24 hours, plug pack only) the telephone line cord from the large base into the If you have purchased a multiple pack, this process will need to be carried out for all handsets and char
ページ8に含まれる内容の要旨
To keep your batteries in the best condition, leave the Date and time handset off the base for a few hours at a time. Providing you have subscribed to your networks Caller Display service, the date and time is set automatically for all Running the batteries right down at least once a week will handsets every time a call is received. help them last as long as possible. If you do not have a Caller Display service you can set the The charge capacity of rechargeable batteries will reduce date
ページ9に含まれる内容の要旨
A Earpiece 2. Getting to know your phone B Display See page 10 for an overview of the display icons. Overview of your handset C Menu key Enter the main menu. Select the option displayed on screen. Confirm menu option OK is displayed on screen. D Redial / Scroll right / Clear / Mute Open the redial list. Scroll to the right. Delete characters on screen when entering names and numbers. Mute / unmute the microphone during a call. Go back to previous menu level BACK displayed on screen. E C
ページ10に含まれる内容の要旨
H Phonebook / Scroll Down / Volume down Handset display Open the phonebook. Scroll down through lists and menus. Decrease the earpiece volume. I Navigator glow ring Illuminates when the phone is in use. Flashes to indicate new Voicemail. J * / Keypad lock Press and hold to lock/unlock the keypad. During a call, press and hold to switch from pulse dialling to tone dialling. Dial a star. K # / Ringer off / Pause A Display icons Press and hold to switch handset ringer on or off. When diall
ページ11に含まれる内容の要旨
Handset ringer is off. D Back ! displayed Press e to go back to the previous menu option, to Steady when the handset is registered and within cancel an action or to delete a character. range of the base. Flashes when the handset is out of range or searching for base. Overview of the base The approximate power levels of your battery are indicated as below: Battery is fully charged. Battery is partially charged. Battery is running low. Battery is almost empty. The battery icon will flash
ページ12に含まれる内容の要旨
Navigating the menus The basic steps of navigating through the menu and on- screen options. 1. From the standby screen, press m. The main menu is opened. 2. Use the u or d keys to scroll through the menu. 3. Soft key options OK and BACK are displayed. Press m to select OK and open a sub-menu or validate an option. Press BACK and go back to previous menu level, correct a character or cancel an action. 4. Press > to return to standby. If you do not press any button on the handset for 15 secon
ページ13に含まれる内容の要旨
Menu map PHONEBOOK CLOCK/ALARM PERSONAL SET ADVANCED SET NEW ENTRY DATE & TIME HANDSET TONE RECALL TIME LIST ENTRY SET ALARM RING VOLUME DIAL MODE RING MELODY ALARM TONE CALL BARRING EDIT ENTRY GROUP MELODY EASY CALL DELETE ENTRY KEY TONE REGISTRATION DELETE ALL FIRST RING SELECT BASE REGIST. BASE DIRECT MEM HANDSET NAME PB TRANSFER* AUTO PICK-UP UNREGISTER AUTO HANG-UP PIN LANGUAGE RESET UNIT ROOM MONITOR PREFIX BACKLIGHT SEL. COUNTRY INTRUSION ECO MODE *This option is only available
ページ14に含まれる内容の要旨
3.1.5 Call from the calls list 3. Using the phone NOTE 3.1 Calls You need to subscribe to your networks Caller Line 3.1.1 Make a call Identification service to be able to see the callers number in the calls list. See Calls list on page 20 for more details. 1. Press <. 1. Press u to enter CALL LOG menu. You have the options 2. Dial the telephone number. to access CALL LIST. Press m to enter CALL LIST. The 3.1.2 Pre-dial first entry in the call list is displayed. 1. Enter the phone number
ページ15に含まれる内容の要旨
ringtone as soon as the call is received then once the callers NOTE identity is displayed, the assigned ringtone will start. See If auto hang-up is on (see page 26) simply replace the handset First ring on page 25. on the base to end the call. The default setting is ON. TIP 3.1.10 Switch handset on/off If Auto Pick up mode (see page 26) is on, simply lift up the handset 1. Press and hold > until the handset switches off. from its base to answer the call. The default setting is On. 2. Press
ページ16に含まれる内容の要旨
3.2.2 Transfer an external call to another handset 4. Phonebook 1. During an external call, press I. The D1000 handset phonebook can store up to 100 names - Your caller is put on hold. and numbers. 2. Enter the number of the handset you want to call or NOTE press * to ring all handsets. Numbers can be up to 24 digits long and names up to 12 - If there are only two handsets, the other handset is characters long. Entries are stored in alphabetical order. called automatically. 3. When the other
ページ17に含まれる内容の要旨
5. Enter a number. Press m to save. Press u or d to To enter a space press 1 select NO GROUP, GROUP A, B or C and press m to Press e to delete a character or press and hold e to confirm. delete all characters. 6. Press > to return to standby. 4.4 Character map NOTE Use the keypad to enter names and characters. You can assign individual contacts to specific groups of your 1 Space 1 - < > * choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specif
ページ18に含まれる内容の要旨
display the number. If there are more than 12 digits, 4.5 Enter a pause press e again to see the rest of the number. If your D1000 is connected to a switchboard, you may need to enter a pause in a stored number. This gives the 3. Press > to cancel the phonebook display. switchboard time to get an outside line. A Pause is normally 4. Press > again to end the call. stored after the switchboard access code (e.g. 9) 1. When storing a number, press and hold # until the 4.7 Edit an entry display
ページ19に含まれる内容の要旨
5. Press > to return to standby. 4.11 One touch keys The keys 1 to 9 enable one touch dialling of entries 4.9 Delete all entries stored in the phonebook. 1. Press m twice. 4.12 Dial a one touch number 2. Scroll d to DELETE ALL and press m. 1. Press and hold a number key 1 to 9. 3. Display shows CONFIRM?. Press m. - The number is displayed and dialled. 4. Press > to return to standby. 2. Press > to cancel the dialling and return to standby. 4.10 Copy phonebook to another handset 4.13 Store a pho
ページ20に含まれる内容の要旨
4.14 Delete a one touch number 5. Caller display and Calls list 1. Press m twice then scroll u or d to DIRECT MEM and If you have subscribed to Caller Line Identification (CLI), and press m. provided the identity of the caller is not withheld, the number 2. Scroll u or d to select KEY 1- 9. of the caller will be displayed together with the date and time of the call (if provided by the network). 3. Press m to display the current entry. Press m NOTE again to open the options menu. If the ca
