ページ1に含まれる内容の要旨
Ampli DECT 150
Ampli DECT 300
CAUTION: THIS TELEPHONE PRODUCT IS SPECIFICALLY DESIGNED FOR PEOPLE
WITH HEARING DIFFICULTIES AND IS PROVIDED WITH A HANDSET EARPIECE WITH
VOLUME CONTROLFOR INDIVIDUAL REQUIREMENTS. DUE CARE MUST BE TAKEN
BY ALL USERS THAT THE HANDSET EARPIECE VOLUME CONTROL IS SET TO THE
LOWEST LEVEL ACCEPTABLE BY EACH RESPECTIVE USER. CARE SHOULD
THEREFORE BE EXERCISE TO ENSURE THAT ANY NEW USERS AR
ページ2に含まれる内容の要旨
CONTENTS CONTENTS CONTENTS 1 PHONE BOOK 25 Create a Phone Book Entry 26 INTRODUCTION 3 Dialing using the Phone Book 27 Unpacking the Telephone 4 Modify a Phone Book Entry 27 Delete a Phone Book Entry 28 DESCRIPTION 5 General Description 5 CALLER DISPLAY 29 View Caller Display 29 INSTALLATION 12 Dial a Number from the Caller Display List 30 Location 12 Delete an Entry from the Caller Display List 30 Setting
ページ3に含まれる内容の要旨
✑ ✑ ✑ INTRODUCTION INTRODUCTION Congratulations on purchasing your Geemarc Ampli DECT telephone. Unpacking the Telephone This telephone offers all the advantages of cordless technology (compliant When unpacking the telephone, you should find the following in the box: with Digitally Enhanced Cordless Telecommunications-DECT standard) coupled with features which maximize clarity and minimize feedback • 1 Ampli DECT150/300 handset throughout a telephone call and provide an overall incre
ページ4に含まれる内容の要旨
DESCRIPTION DESCRIPTION General Description Handset Description Incoming Call /New Speaker Message Indicator Belt clip Receive and end LCD display Volume button call key adjustment Confirm/Scroll key Cancel key Phonebook keys Call List key Keypad - 1 and 3 used to scroll through the menu Battery options compartment cover Menu Key Amplifier key Microphone 6 5
ページ5に含まれる内容の要旨
DESCRIPTION DESCRIPTION Base Description Answering Amplifier Shaker Machine key key switch Charge contacts Handset cradle Page key Tone adjustment 8 7
ページ6に含まれる内容の要旨
DESCRIPTION DESCRIPTION LCD Screen Description Base Ringer The LCD screen is split into two distinct areas: volume setting The icon area. This is found around the outside of the screen. This displays the various system icons which help you to use the telephone. The main area. This is found across the centre of the screen. It displays the following: • number being dialled • call display information • phonebook 1 2 3 4 5 **Line socket *Power adaptor socket
ページ7に含まれる内容の要旨
DESCRIPTION INSTALLATION Answering Machine Menu 1 Location Ringer Volume/Melody Menu 2 Ensure you situate the telephone close enough to the power socket so that Handset Registration Menu the cable will reach safely without stretching. Also, the mains power needs 3 to be easily accessible in case you need to disconnect the power. Technical Settings Menu 4 Earpiece Volume Adjustment Make sure the telephone is at least 1 metre away from other electrical 5 products e.g.TV, radio and
ページ8に含まれる内容の要旨
INSTALLATION BASE SETTINGS Setting Up Base Ringer Volume Plug the power cable into the power socket on the base. Plug the adaptor A slider switch located on the rear of the telephone base allows the base into the mains supply and switch the supply on. (*) The Power/Charging ringer volume to be adjusted. The following settings are available: indicator lights up (green). Off Connect the line cord plug to the line socket on the base. Connect the other end of the line cord to the P
ページ9に含まれる内容の要旨
HANDSET SETTINGS HANDSET SETTINGS Ringer Settings Press to activate the menu Ringer Volume Use and to scroll through the menu to find the desired ringer There is a choice of four handset ringer volume levels. icon - .The selected icon will flash on the display. Ringer Melody Press to scroll through the ringer volume/melody menu until you There is a choice of seven handset ringer melodies to notify you of reach the requiredlevel: incoming calls. 1/4 - the volume menu
ページ10に含まれる内容の要旨
HANDSET SETTINGS HANDSET SETTINGS Shaker Settings Technical Settings A switch located on the right side of the telephone handset allows the Caller Display Settings shaker to be activated when receiving an incoming call. There is a choice of two Caller Display settings: Shaker On 1 for UK 2 for France Shaker Off Dialling Mode (Tone/Pulse) Settings In the UK, all telephone exchanges now use Tone dialling. The Tone/Pulse Handset Registration setting is pre-set to Tone on your t
ページ11に含まれる内容の要旨
HANDSET SETTINGS USING THE TELEPHONE Making a Call Press to activate the menu Pick up handset. Use and to scroll through the menu to find the desired ringer Press icon - .The selected icon will flash on the display When you hear dialing tone, dial the number on the keypad. You can press to cancel an incorrect entry Press to scroll through the technical settings menu until you reach the required level: 1/5 the Caller Display Settings menu To end
ページ12に含まれる内容の要旨
USING THE TELEPHONE USING THE TELEPHONE Recalling Recent Numbers Receiving Volume and Tone Adjustment You can call back any of the last 5 numbers dialled as follows: You can alter the receiving volume and tone according to your hearing requirements. Use the Volume button at the rear of the telephone handset to adjust the Press level according to your hearing requirements. . The volume can be Use and to scroll through the list in order to find the number adjusted in fo
ページ13に含まれる内容の要旨
USING THE TELEPHONE USING THE TELEPHONE Pressing the Amplify key during a call will turn off the additional Paging the Handset amplification and tone controls. However, you can still adjust the handset If you wish to locate the handset simply follow the instructions below: receive volume with the Volume button at the rear of the handset. VOLUME Press , located on the front of the base 16db 20db 24db 28db TONE All regis
ページ14に含まれる内容の要旨
PHONE BOOK PHONE BOOK Names and phone numbers can be stored in the two phone books Create a Phone Book Entry available on the telephone. You can store 20 entries into the two phone books with the name and phone numbers of your correspondent. If you have subscribed to a Caller Display service and if the caller name and number have been stored in the phonebook, the name and the number of the caller will be displayed during the incoming call. Enter the telephone number (and code) you w
ページ15に含まれる内容の要旨
PHONE BOOK PHONE BOOK Dialling Using the Phone Book Delete a Phone Book Entry Select the desired phonebook by pressing Select the desired phonebook by pressing or or Use and to scroll through the phonebook to find the number Use and to scroll through the phonebook to find the number you wish to dial you wish to dial Press . The number will be dialled automatically Press Note: To leave the phonebook press or . The telephone
ページ16に含まれる内容の要旨
CALLER DISPLAY CALLER DISPLAY The features described in this section are only available if you subscribe to Dial a Number from the Caller Display List a Caller Display service from your network provider. Press the Call List key Caller Display means you can see who is calling on your handset display (provided the number is not withheld, unavailable or is an international call). If you have stored a name to go with the number in your handset Use and to scroll through the c
ページ17に含まれる内容の要旨
CALLER DISPLAY ANSWERING MACHINE This chapter is only relevant for the Ampli DECT 300. Store Names and Numbers into the Phone Book Your Ampli Dect 300 answering machine can be operated from either: Press the Call List key • the handset • remotely from any external telephone. Use and to scroll through the call list to find the number you wish to store The default setting for the answering is On. Select one of the two phonebooks you wish to store the number in
ページ18に含まれる内容の要旨
ANSWERING MACHINE ANSWERING MACHINE Listening to Messages Listening to Messages This icon will flash when you have a new message. The new message indicator will also be lit. Press button located on the right side of your telephone The number of messages, the day of the week This icon will be displayed, however, not flashing when you have and the time will be displayed. The telephone will messages that you have listend to but not deleted. state the number of messages re
ページ19に含まれる内容の要旨
ANSWERING MACHINE ANSWERING MACHINE Deleting a Message Listen to an Outgoing Message If you wish to delete a message, press whilst the message is playing. Press button located on the right side of your telephone A beep will be heard by means of confirmation. Deleting all Messages Press If you wish to delete all messages, press and hold the key after listening to all the messages. 00 will be displayed on the screen and a Outgoing message will be read beep will be h
ページ20に含まれる内容の要旨
ANSWERING MACHINE ANSWERING MACHINE Answering Machine Settings Press to activate the menu System Day and Time Use and to scroll through the menu to find the desired ringer Day and time of the message recording will be added automatically to icon - .The selected icon will flash on the display each message. When using the handset, the day and time of the message is also displayed on the screen. If you subscribe to your network Press to scroll through the answering machi
