ページ1に含まれる内容の要旨
Model 28225
DECT6.0
Cordless Handset
Speakerphone
Answering System
User’s Guide
ページ2に含まれる内容の要旨
Important Information NOTICE: This product meets the applicable Industry Canada technical specifications. Operation is subject to the following two conditions: (1) This device may not cause interference, and () This device must accept any interference, including interference that may cause undesired operation of the device. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degrada
ページ3に含まれる内容の要旨
Telephone Network Information Should your equipment cause trouble on your line which may harm the telephone network, the telephone company, where practicable, may notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. The telephone company may make changes in its communications facilities, equipment, operations or procedures w
ページ4に含まれる内容の要旨
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Information for DECT Product This telephone is compliant with the DECT 6.0 standard which operates in the 1.9GHz to 1.9G
ページ5に含まれる内容の要旨
Table of Contents Important InformatIon ................2 seleCt Base ................................ 20 Interference InformatIon ............2 tones on/oFF ......................... 20 telephone network InformatIon 3 reset hanDset ........................... 21 ren number ..............................3 hanDset DisPlay settings........ 21 hearIng aId compatIbIlIty (hac) 3 wallPaPer .................................. 21 lIcensIng ....................................3 hanDset name ..............
ページ6に含まれる内容の要旨
Table of Contents caller Id (cId) ........................31 changIng the batterIes .............37 Call waiting Caller iD ........... 31 Battery saFety PreCautions .... 37 reCeiVing CiD reCorDs ............ 31 dIsplay messages ......................38 reViewing CiD reCorDs answerIng system dIsplay (in CiD memory) .................... 32 messages ...............................38 Dialing a CiD numBer ............. 32 handset sound sIgnals ............39 storing CiD reCorDs troubleshootIng guI
ページ7に含まれる内容の要旨
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for 28225xx2 Model) Make sure your package includes the items
ページ8に含まれる内容の要旨
Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interferen
ページ9に含まれる内容の要旨
Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. • Avoid areas of excessive dust, moisture and low temperature. • Avoid other cordless telephones or personal computers. • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wire
ページ10に含まれる内容の要旨
Base Layout display page (button) volume p / q do not disturb (button) (button) charge/ ans on/off delete in use (answerer play/stop (button) indicator on/off (button) button) menu (button) skip memo/ (button) repeat record (button) (button) 10
ページ11に含まれる内容の要旨
Handset Layout redial/p (button) mute t (button) CID/q (Caller ID button) format u display (button) Soft Key speaker Left/menu (button) OK (button) Soft Key Right/intercom talk/flash (button) (button) end repeat (button) (button) mem (phonebook button) stop (button) skip (button) *tone/ringer # Key Lock (button) (button) pause (button) microphone Display Icons Battery Status Ringer OFF Keypad Locked In Range Icon Active Call Alarm ON Icon Handsfree Active CID New Calls TAM
ページ12に含まれる内容の要旨
Installing the Phone Installing the Handset Batteries NOTE: You must connect the handset batteries before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Model 5-2825 NiMH 1.2V 600mAh rechargeable batteries, that are compatible with this unit. 1. Locate batteries and batteries door which are packaged together inside a plastic bag and are separate from the handset. . Locate the batteries compartment on the back of the handset. . Insert the
ページ13に含まれる内容の要旨
Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your telephone base on a level surface, such as a desktop or tabletop. . Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the base and the other end into a modular jack. . Plug the AC power converter into the electrical outlet and the DC connector into the jack on the bottom of the base. 4. Place the handset in the cradle on the base. 5. The charge indica
ページ14に含まれる内容の要旨
Answering System Setup This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system. Answering System ON/OFF When you first plug in and activate your phone, the answering system will be in the ON mode. NOTE: The MESSAGES indicator illuminates when the answering system is on. The indicator blinks when you have new messages. The indicator displays “- -” when the system is off. 1. Press the an
ページ15に含まれる内容の要旨
NOTE: If you choose not to record an outgoing announcement, a default announcement plays instead. To return to the default announcement after you have recorded your own outgoing announcement, press the delete button while the announcement is reviewing. Sample Outgoing Announcement Hi, this is (use your name here), I can’t answer the phone right now, so please leave your name, number and a brief message after the tone, and I’ll get back to you. Thanks. NOTE: The maximum recording time for
ページ16に含まれる内容の要旨
Rings to Answer This feature lets you select the number of times you want the phone to ring before the answering system answers a call. 1. Press the menu button repeatedly until you hear “Number of rings selected is 3,4,5,6 or TS”. The indicator displays nr. . Press the repeat or skip button to choose your desired setting. . Press the menu button to confirm your setting. NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there are NEW messages, OR the unit answers
ページ17に含まれる内容の要旨
Programming Your Phone Main Menu The main menu on the handset provides easy access to most of your phone settings. The following table outlines the Main menu items: Answering Access the answering system to listen to your System messages. Adjust many of your answering system settings from the handset menu. Calls List A list of all incoming calls. Display Setup Customize the wallpaper, name, display contrast, and language used on the handset. Base Setup Program the area code and dialing mode.
ページ18に含まれる内容の要旨
Ringer Setup Ringer Volume 1. Use the or button to scroll to Ringer Setup through the submenu HS Settings. . Press the OK (SKL) button. . Use the or button to scroll to Ringer Volume. 4. Press the OK (SKL) button. 5. Use the or button to select the ringer volume: Ringer Volume 1, Ringer Volume 2, Ringer Volume 3, Ringer Volume 4, Ringer Volume 5 or OFF. 6. Press the OK (SKL) button to confirm. Ringtone 1. Use the or button to scroll to Ringtone through the submenu Ringer Setu
ページ19に含まれる内容の要旨
Set Alarm 1. Use the or button to scroll to Set Alarm through the submenu HS Settings. . Press the OK (SKL) button. . Use the or button to choose Set Alarm or Alarm Tone. 4. Press the OK (SKL) button . If you select [Set Alarm]: 1. Use the or button to select OFF, Once or Daily. . Press the OK (SKL) button. Enter the time (HH:MM). . Press the OK (SKL) button to confirm the setting. If you select [Alarm Tone]: 1. Use the or button to select one type of ring tone (14 ring melodi
ページ20に含まれる内容の要旨
NOTE: 1. Once the registration procedure is complete, the handset will automatically be allocated the next available handset number. 2. Once the Page button is pressed and held for more than 10 seconds on a base station, the base stays in registration mode for approx. 2 minutes. While the handset searches for an available base station, the screen displays SEARCHING. Deregister Handset WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because on
