ページ1に含まれる内容の要旨
Loading the multipurpose feeder 1
Printing
The multipurpose feeder holds approximately 35 sheets of 20 lb paper.
Note: You can load the multipurpose feeder with or without the duplex unit
Paper handling
attached to the printer.
1 Open the multipurpose feeder.
Maintenance
Troubleshooting
Administration
Index
www.lexmark.com
Lexmark W820
ページ2に含まれる内容の要旨
Loading the multipurpose feeder 2 Printing 2 Slide the side guide all the way to the back. 3 Adjust the extension guide to the length of the print media to be used. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark W820
ページ3に含まれる内容の要旨
Loading the multipurpose feeder 3 Printing 4 Orient the stack of print media correctly for the size, type, and print method you are loading. Refer to the icons on the feeder. Paper handling Note: Do not exceed the maximum stack height indicated on the side guide. Overfilling the feeder may cause paper jams. Maintenance Maximum stack height indicator label Loading Paper size icons and orientation icons Troubleshooting Administration Index www.lexmark.com Lexmark W820
ページ4に含まれる内容の要旨
Loading the multipurpose feeder 4 Printing 5 Place the print media along the front side of the multipurpose feeder and push the print media into the printer as far as it will go. Do not force the print media. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark W820
ページ5に含まれる内容の要旨
Loading the multipurpose feeder 5 Printing 6 Slide the side guide forward until it lightly touches the stack. Paper handling Maintenance Troubleshooting Note: Once you load print media into the multipurpose feeder, set the Paper Administration Size, Paper Type, and Paper Source from the operator panel or from your software application. When you are not using the multipurpose feeder, remove any print media from the Index feeder, push the extension guide back in, and push the multipurpose feeder t
