ページ1に含まれる内容の要旨
21011
2.4 GHz Digital Dual-Handset
Caller ID with Call Waiting
Cordless Speakerphone
User’s Guide
We bring good things to life.
ページ2に含まれる内容の要旨
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provi
ページ3に含まれる内容の要旨
TABLE OF CONTENTS EQUIPMENT APPROVAL INFORMATION........ 2 CORDLESS PHONE BASICS.................... 26 INTERFERENCE INFORMATION ................... 2 SPEAKERPHONE .............................. 26 HEARING AID COMPATIBILITY................... 2 CHARGE INDICATOR ......................... 26 INTRODUCTION ..................................... 5 MAKING A CALL ............................. 27 HANDSET AND CHARGE CRADLE LAYOUT .. 7 HANDSET ............................... 27 BASE LAYOUT ................
ページ4に含まれる内容の要旨
RECEIVING AN INTERCOM CALL ... 36 REVIEWING CALL RECORDS ............... 44 RECEIVING AN EXTERNAL TELEPHONE TRANSFERRING CID RECORDS CALL DURING AN INTERCOM CALL ..... 36 TO MEMORY................................... 45 BETWEEN HANDSETS ................ 36 DIALING A CALLER ID NUMBER ......... 46 BETWEEN BASE AND HANDSET .. 36 DELETING THE CALLER ID RECORD USING INTERCOM OR SHOWING IN THE DISPLAY ................. 47 CONFERENCE WITH DELETING ALL CALLER ID RECORDS .. 48 EXTERNAL CALLS .............
ページ5に含まれる内容の要旨
INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on purchasing this GE Dual Cordless Handset Telephone System. This system operates in the 2.4 GHz frequency range, and is unique to conventional cordless telephones. When the base is connected to electrical power and a telephone line, it can support up to
ページ6に含まれる内容の要旨
Your Caller ID Call Waiting phone allows you to: • view the name and telephone number of a caller while you are on the phone (Call Waiting Caller ID). • identify callers before you answer the phone. • view the time and date of each incoming call. • record up to 40 Caller ID messages sequentially in each handset and the base. • know who called while you are on the other line or when you were away. • screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answeri
ページ7に含まれる内容の要旨
c l t a a r i o e i h d n m k c g n a t s b l l f e a redial . c e n c e r HANDSET AND CHARGE CRADLE LAYOUT soft key Display buttons AC power supply format/ conference button handset charge cradle TALK/callback cid/vol v format button TALK button v page ringer redial def 1 abc 3 2 flash button 4 ghi jkl mno 6 5 button charge wxyz 7 pqrs tuv 8 9 tone pause oper # * 0 page/int ringer button button charge indicator # pause button * tone button BASE LAYOUT soft key buttons Display redial button ring
ページ8に含まれる内容の要旨
c l t a a r i o e i i h d n n m k k c c g n a t a t s b b l l l l f e e a redial a redial . c c e n n c c e e r r BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the items shown here. v v CID def v format v 1 2 abc 3 format TALK v TALK v v ghi mno 4 5 jkl 6 page ringer volume page ringer v wxyz abc def 1 2 abc 3 def 7 pqrs 8 tuv 9 1 2 3 4 ghi jkl 6 mno pause 4 ghi 5 jkl 6 mno 5 charge * tone 0 oper # pqrs tuv wxyz page/int. 7 pqrs 8 tuv 9 wxyz 7 8 9 speaker tone oper #pause * to
ページ9に含まれる内容の要旨
IMPORTANT INSTALLATION INFORMATION • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. •Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems. IMPO
ページ10に含まれる内容の要旨
INSTALLING THE PHONE Choose the best location to install your base and handset charge cradle. Your base and handset charge cradle should be placed on a level surface such as a desk or table top, or you may mount the base on a wall. charge CONNECTING THE AC (ELECTRICAL) POWER 1. Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. When the handset is placed on the cradle the charge indicator turns on to indicate the battery is chargin
ページ11に含まれる内容の要旨
WALL MOUNTING THE BASE NOTE: For best results, leave the phone on a flat surface during initial charging before you hang the phone on the wall. 1. Turn the base over. 2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place. 3. Slip the mounting holes (on the back of the pedestal) over the wall plate posts and slide the unit down into place. (Wal
ページ12に含まれる内容の要旨
2. Press cid/vol (up and down arrow) button on the handset or the CID (up and down arrow) button on the base to scroll to LANGUAGE. 3. Press the OK soft key and SET LANGUAGE 1ENG 2 FRA 3ESP shows in the display. 4. Use the touch tone pad on your handset to select 1ENG, 2FRA, or 3ESP, or use the cid/vol (up or down arrow) button on the handset or the CID (up or down arrow) button on the base to move the arrow to your selection. English is the default setting. SET LANGUAGE 1 ENG 2 FRA 3 ESP OK
ページ13に含まれる内容の要旨
1. Press the CID (up or down arrow) button to scroll to CONTRAST. LANGUAGE CONTRAST OK EXIT 2. Press the OK soft key and SET CONTRAST 1 2 3 shows in the display. 3. Use the touch tone pad on your base to select 1, 2, or 3, or use the CID (up or down arrow) button to move the arrow to your selection. Contrast level 1 is the default setting. SET CONTRAST 1 2 3 OK EXIT 4. Press the OK soft key to save your selection and return to the main menu. The selected contrast level displays for two
ページ14に含まれる内容の要旨
AREA CODE Make sure your handset or base is at the main mode. If you enter a 3-digit area code in the area code menu, your local area code will not appear in Caller ID messages you receive. Instead, you will see only the local seven digit number. Calls you receive from outside your local area code will show the full ten-digit number. This setting may be made with the handset or the base. Make sure your phone is OFF (not in TALK mode). 1. Press the cid/vol (up or down arrow) button on the handset
ページ15に含まれる内容の要旨
LANGUAGE AREA CODE AREA CODE RINGER TONE OK EXIT OK EXIT HANDSET DISPLAY BASE DISPLAY RINGER TONE Make sure your handset or base is at the main menu. This setting may be made with the handset or the base. You may choose from six different ringer tones. Make sure your phone is OFF (not in TALK mode). 1. Press the cid/vol (up or down arrow) button on the handset or the CID (up and down arrow) button on the base to scroll to RINGER TONE. AREA CODE RINGER TONE RINGER TONE REGISTRATION OK EXIT OK EX
ページ16に含まれる内容の要旨
4. Press the OK soft key to save your selection, and return to the main menu. The new ringer tone is displayed for two seconds. RINGER TONE - 2 NOTE: Press the EXIT soft key to keep the previous setting and return to the main menu screen. AREA CODE RINGER TONE REGISTRATION RINGER TONE OK EXIT OK EXIT HANDSET DISPLAY BASE DISPLAY TONE/PULSE Most telephone systems use tone dialing, however, some may still use pulse dialing. Depending on your telephone system, set the dialing mode as follows: T
ページ17に含まれる内容の要旨
3. Use the touch tone pad on the base to select 1TONE or 2PULSE, or press the CID (up or down arrow) button to move the arrow to your selection. The default setting is 1. 4. Press the OK soft key to save your selection, and return to the main menu. The dialing mode displays for two seconds. TONE NOTE: Press the EXIT soft key to keep the previous setting and return to the main menu screen. TONE / PULSE TIME OK EXIT NOTE: If you aren’t sure which dialing system you have, set the telephone to ton
ページ18に含まれる内容の要旨
3. Press the OK soft key and HANDSET NEEDS REGISTRATION shows in the display. HANDSET NEEDS REGISTER REGISTRATION HANDSET ? OK EXIT OK EXIT 4. Press the OK soft key and HOLD, BASE PAGE WAIT FOR BEEP shows in the display. HOLD BASE PAGE WAIT FOR BEEP EXIT 5. Press and hold the page/int button on the base until you hear a long beep and the handset displays CONFIRM REGISTRATION? CONFIRM REGISTRATION ? OK EXIT 6. Press the OK soft key on the handset to confirm the registration. HANDSET # REGIST
ページ19に含まれる内容の要旨
BILL SMITH HANDSET 2 MENU DIR 7. Use the touch tone pad to enter the name. More than one letter is stored in each of the number keys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B. Briefly pause and the cursor moves to the next field. Press the 4 key 3 times for the letter I. Briefly pause and the cursor moves to the next field. Press the 5 key 3 times for the letter L. Briefly pause and the cursor moves to the next field. Press the 5 key 3 times for the seco
ページ20に含まれる内容の要旨
HANDSET DE-REGISTRATION This setting may be made with the handset only. Deregistration cancels a handset’s registration. If you do not know a handset’s name, you should deregister the handset according to the steps below. During the de- registration process, keep the handset near the base. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-re
