ページ1に含まれる内容の要旨
� �
3 Squeeze the rear guide tab, and slide the guide 6 Touch Submit.
Lexmark™ X642
to the correct position for the size media you are
7 Touch Paper Type.
loading.
8 Touch the left or right arrow to change the
Quick Reference
media type for the desired tray.
9 Touch Submit.
10 Touch the home icon.
Loading paper and
specialty media
Loading the multipurpose feeder
1 Push the release latch, and lower the
Loading standard trays and
multipurpose feeder.
4 Flex the sheets back and forth to loosen
ページ2に含まれる内容の要旨
� � � 3 Slide the width guide to the far right. Follow the illustrations for loading the paper Closing the multipurpose feeder according to your options. 1 Remove print media from the multipurpose feeder. 2 Push the extension tray in. 3 Close the multipurpose feeder cover. 4 Flex the sheets or envelopes back and forth to Simplex (single sided) loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. Copying 5 Load the media in the tray. Loa
ページ3に含まれる内容の要旨
3 Change the copy options to meet your 6 Touch Copy It. The scanner will identify the different size pages requirements. as they scan, and then print them on the correct size paper. 4 Touch Copy It. Copying on both sides of the Paper Example 2: the MFP has one paper tray, loaded with 1 Place your original document in the automatic letter-size paper. A document mixed with letter and Copying using the scanner glass document feeder faceup, short-edge first. legal pages needs to be copied. 1 Op
ページ4に含まれる内容の要旨
Printing a confidential job Printing from a USB flash memory Faxing device 1 With the file open, select File Print. 2 Click Properties. (If there is no Properties 1 Make sure the MFP is on and Ready or Busy Sending a fax button, click Setup, and then click Properties.) appears. 1 Place your original document in the automatic 3 Depending on the operating system, you may 2 Insert a USB flash memory device into the USB document feeder faceup, short-edge first. have to click the Other Options
ページ5に含まれる内容の要旨
Maintaining the printer Cleaning the scanner glass 1 Open the document cover. 2 Dampen a clean, lint-free cloth or cotton swab with isopropyl alcohol (95%). 3 Wipe the flatbed and backing material by moving the cloth or swab from side to side. Backing material Scanner glass 4 Close the document cover.