ページ1に含まれる内容の要旨
_
Digital Cordless Phone
Expandable
Speakerphone
Lighted Display
User Guide
EM6000
ページ2に含まれる内容の要旨
In the box Handset Base Line Cord Bracket Expandable Speakerphone Lighted Display Rechargeable AC User Battery Adapter Guide
ページ3に含まれる内容の要旨
Getting started Installing the battery 1. Open the battery cover. 2. Insert the battery. Be sure to insert exactly as shown. 3. Close the battery cover. 4. Place the handset on the base to charge. Before using for the first time, charge the handset for 12-16 hours Installing the bracket 1. Before installing the bracket, connect the line cord and AC adaptor to the back of the base (see “Connecting”). 2. Snap the bracket to the back of the base as shown below. 3. Place the base on a
ページ4に含まれる内容の要旨
Connecting 1. Plug one end of the line cord into the jack at the back of the phone’s base, and the other end into a modular phone jack. line cord modular phone jack insert here Jack AC adapter AC Outlet 2. Connect the AC adaptor as shown above, and plug into a standard AC outlet. 3. The handset will display “Searching” , wait until “Handset 1” is displayed. 4. Press on the handset and confirm you hear the dial tone. Wall Mounting To mount your telephone on a wall plate (not in
ページ5に含まれる内容の要旨
The handset Standby Screen
ページ6に含まれる内容の要旨
Using the phone Speaker • to use the speakerphone, press the button, this can be done before or during a call volume screen Volume • during a call or while using the speakerphone, use the ▲ and ▼ buttons to increase or decrease the volume Redial • to redial a number, press and HOLD the button, then use the ▲ and ▼ buttons to select from a list of recently dialed numbers, and press to make the call redial screen 555-555-1111 555-555-2222 555-555-333
ページ7に含まれる内容の要旨
Phonebook The phone can store up to 50 names and numbers in its phonebook. Caller information may be saved from the received calls in the Caller ID memory (see "Reviewing Caller ID information"), or entered manually. Dialing a number from the phonebook: 1. Press the button to enter the phonebook. 2. Use the ▲ and ▼ buttons to navigate up or down. 3. Press the button to dial the selected number. phonebook screen John Smith Mike Hayes Paul Williams Angela Dotson • to redi
ページ8に含まれる内容の要旨
Connecting 1. Plug one end of the line cord into the jack at the back of the phone’s base, and the other end into a modular phone jack. 2. Connect the AC adaptor as shown above, and plug into a standard AC outlet. 3. The handset will display “Searching” , wait until “Handset 1” is displayed. 4. Press on the handset and confirm you hear the dial tone. Wall Mounting To mount your telephone on a wall plate (not included), follow the instructions below: 1. Plug the line cord into
ページ9に含まれる内容の要旨
Answer calls • answer a call • start a call • dial a number from the phonebook or Caller ID history End calls • end a call • in the menu, escape to talk screen the standby screen Press the soft key to mute or disable mute 00:30 Mute Soft Key spk To answer an incoming call while having a conversation: After you hear the Call Waiting tone, press and release the button. The first call is placed on hold and the second call is an
ページ10に含まれる内容の要旨
Caller ID / Call Waiting Caller ID IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service from your local telephone company. This telephone automatically displays an incoming caller’s name and telephone number, as well as the date and time of the call. It can record and store the information of up to 30 calls into the phone’s Caller ID memory. Reviewing Caller ID information: • In th
ページ11に含まれる内容の要旨
Call Waiting / Flash The Flash feature is used to activate calling services available through your local phone company, such as Call Waiting, and Three Way Calling. To use the features below you must subscribe to these services from your local telephone company. To answer an incoming call while having a conversation: After you hear the Call Waiting tone, press and release the button. The first call is placed on hold and the second call is answered. press to flash To return to
ページ12に含まれる内容の要旨
Intercom The intercom feature is only available for cordless phone systems with multiple handsets (see “Adding additional handsets” on the reverse side of this user guide). 1. To use the intercom, press and HOLD the button. 2. Dial the number of the handset you would like to call. intercom screen Handset 2 Jan 1 12:00 Internal_ Paging • Press and the handset will emit an alarm making it easy to find page handset
ページ13に含まれる内容の要旨
Adding additional handsets NOTE: It is possible to register up to 4 additional handsets to the base unit for a total of 5 handsets. If you would like to purchase additional handsets, please contact our Customer Service department at: 1-877-768-8483 (Toll Free) Monday – Thursday: 9AM-5PM (EST) Friday: 9AM – 3PM (EST) or via e-mail at: cs@southerntelecom.com *Includes 1 handset & base in the package, additional handsets sold separately Handset 1 Handset 2 Handset 3 Handset 4 Handset 5 Jan 1 1
ページ14に含まれる内容の要旨
Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of elect
ページ15に含まれる内容の要旨
When using your telephone equipment, basic safety precautions should Rechargeable battery warning always be followed to reduce the risk of fire, electric shock and injury to ● This equipment contains a rechargeable battery. persons, including the following: ● Rechargeable batteries are known to the State of California to cause cancer. ● Do not short-circuit the battery. 1. Do not use this product near water, for example, near a bath tub, wash ● The rechargeable batteries contained in this equ
ページ16に含まれる内容の要旨
Compliance information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. FCC Part 68 information 1. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must
ページ17に含まれる内容の要旨
FCC Part 15 information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectio
ページ18に含まれる内容の要旨
FCC RF exposure information This product complies with FCC radiation exposure limits under the following conditions: ● The base must be placed to allow a minimum of 20cm (8 inches) between the antenna and all persons during normal operation. ● The base must not be collocated or operated in conjunction with any other antenna or transmitter. ● The handset is designed for body-worn operation and meets FCC RF exposure guidelines when used with any belt clip, carrying case, or other
ページ19に含まれる内容の要旨
Limited Warranty FCC RF exposure information 90 Days Limited Warranty This product complies with FCC radiation exposure limits under the following In the unlikely event that this product is defective, or does not perform conditions: properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. ● The base must be placed to allow a minimum of 20cm (8 inches) between the antenna and all persons during normal
ページ20に含まれる内容の要旨
Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. FCC Part 68 information 1. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provid
