ページ1に含まれる内容の要旨
DPH-150S
VoIP Phone
User Manual
Ver.1.00
2008/01/02
ページ2に含まれる内容の要旨
Table of Contents INTRODUCTION ..................................................................................................................................................................4 1. GETTING STARTED...................................................................................................................................................4 1.1. PACKAGE CONTENTS................................................
ページ3に含まれる内容の要旨
4. OPERATING THE PHONE ......................................................................................................................................17 4.1. DIALING AN IP ADDRESS.....................................................................................................................................17 4.2. DIALING A SIP NUMBER .....................................................................................................................................17 4.3. SPEED DI
ページ4に含まれる内容の要旨
6.18. ADVANCE – PHONE SETTINGS (PHONE SETTING)..............................................................................................34 6.19. ADVANCE – PHONE SETTINGS (TIMER)..............................................................................................................36 6.20. ADVANCE – PHONE BOOK...................................................................................................................................37 6.21. ADVANCE – SPEED DIAL ................
ページ5に含まれる内容の要旨
Introduction VoIP (Voice over Internet Protocol; also known as Internet Phone) is a technology that allows anyone to make a telephone call over the Internet environment. This is an operation manual for the DPH-150S IP Phone. It is intended to help you configure the telephone. Please follow the user guide carefully as troubleshooting the telephone can be very difficult and time consuming. 1. Getting Started 1.1. Package Contents The following materials are included in the package. Please
ページ6に含まれる内容の要旨
1.2. Phone Specifications Protocol Pre-dial before sending NAT Traversal IETF SIP (RFC3261) Hot Line UPnP Handset / Speakerphone STUN Network Interface Volume adjustment Static port mapping RJ45 x 2, 10/100BaseT Speed dial (10 records) Phone book (200 records) TCP/IP LCD Display Call history (Incoming calls / IP/TCP/UDP/DHCP/RTP/ 2 x 16 characters Outgoing calls / Missed FTP//HTTP/NTP/TFTP/DNS calls) Key Pad MP3 Ringer Configuration 25 keys Internet Radio Key
ページ7に含まれる内容の要旨
1.3. Phone Diagram No. Key Function 2 x 16 Characters LCD Displays menu, time, clock, name, phone number, call status (1) Display Indicates that phone is currently in use or ringing LED Indicator (2) Cycle through the phone menu, adjust volume (3) Up Enable 3-way conference 3-Way Conference (4) Confirm setting change, exit menu, dial, save changes (5) OK / Right Access the phone menu (6) Menu Disable user’s microphone so that the person on the other line can
ページ8に含まれる内容の要旨
1.4. Key Pad Definition and Text Entry You can use alphanumeric characters to enter details into the phone, including the phone book and other settings. The table below shows the characters that you can enter in the different text modes. Text Mode Text Mode Key Normal (ABC) Numeric (0-9) Key Normal (ABC) Numeric (0-9) 1 pqrsPQRS 7 PQRS abcABC 2 tuvTUV 8 ABC TUV defDEF 3 wxyzWXYZ 9 DEF WXYZ ＠ . ＿ － ＊ ＃（） ghiGHI 4 0 GHI @ ％ ＆ ＋ ／ ＄ , jklJKL 5 . * JKL mnoMNO 6 # MNO
ページ9に含まれる内容の要旨
2. Connecting the IP Phone Connect the IP Phone as in the following diagram: Wide Area Network / Internet Cable/xDSL Modem Router/HUB/ Switch Ethernet Cable Ethernet Cable Power Adapter LAN WAN DC IN 5V 8
ページ10に含まれる内容の要旨
3. Initial Setup 3.1. IP Phone Setup Map 9
ページ11に含まれる内容の要旨
SNTP Cycle: 01 Do Not Disturb: ENABLE/DISABLE CF Unconditional: ENABLE/DISABLE CF User Busy: ENABLE/DISABLE CF No Answer: ENABLE/DISABLE Anonymous Call: ENABLE/DISABLE Anony Call Rej: ENABLE/DISABLE Ring Type: 1~4: Tone Ringing1/2/3/4/5~8/9 5~8 : Melody 9: MP3 WAN MAC Address: 00D0E9000001 LAN MAC Address: 00D0E9000002 Version: V: 01.00 UPDATE CHANGES? OR 10
ページ12に含まれる内容の要旨
NOTE 1: If you made any modifications, you may quit setup at any time by pressing MENU + OK to save and exit or MENU + CANCEL to quit without saving. The phone will automatically exit from the menu screen if there are no inputs from the user. NOTE 2: Use or to select ENABLE or DISABLE. NOTE 3: The left arrow key can be used as the Backspace key. 3.2. Display Name Press Enter the display name Display Name: Your name 3.3. ADSL Dialup Some Internet Service Providers (mostly
ページ13に含まれる内容の要旨
3.3.4. Disable ADSL Dialup Press ADSL DIALUP: Use to select “Disable” DISABLE 3.4. DHCP (Dynamic Host Configuration Protocol) DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network. If your ISP provides a static IP address, you must disable DHCP and enter the IP address provided. 3.4.1. Enable DHCP Press DHCP: ENABLE Use or to set DHCP “Enable” Press IP Address: IP address automa
ページ14に含まれる内容の要旨
3.4.2. Disable DHCP Press DHCP: Use or to set DHCP “Disable” DISABLE Press IP Address: Enter the IP address 192.168.001.161 Press Enter the subnet mask Subnet Mask: 255.255.255.000 Press Router IP: Enter the router IP address 192.168.001.001 3.5. DNS Server IP The domain name system (DNS) is the way that Internet domain names are located and translated into Internet Protocol addresses. There is probably a DNS server within close geographic
ページ15に含まれる内容の要旨
3.7. Do not Disturb This setting allows the user to reject all incoming phone calls. Press Do Not Disturb: Use or to select “Enable” or “Disable” ENABLE /DISABLE 3.8. CF (Call Forward) Unconditional Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable. You will need to use a web-browser to input the forwarding phone number. Refer to section 6 for more information on using the web configuration. Press CF Unconditional:
ページ16に含まれる内容の要旨
3.11. Anonymous Call Enables the caller (user) to hide the name and phone number from the receiver. Press Anonymous Call: Use or o select “Enable” or “Disable” ENABLE / DISABLE 3.12. Anony Call Rej. (Anonymous Call Rejection) Reject any anonymous incoming calls. Press Anony Call Rej: ENABLE / DISABLE Use or to select “Enable” or “Disable” 3.13. Ringing Type Select the ring tone. There are 9 ring tones in total. Press Ring Type: Use or to select the ring t
ページ17に含まれる内容の要旨
3.15. Version The version menu displays the firmware version. You cannot modify the version number. Press The firmware version is displayed on the screen Version: V: 01.00 3.16. Language Selection The VoIP Phone supports 2 languages: English and Russian. Language: English Press followed by Use or to select the preferred language 3.17. Time Format You may select the 12hr or 24hr time format. ABC Press followed by Use or to select the time format Ti
ページ18に含まれる内容の要旨
3.18.3. Handset Volume Pick up the handset and press to increase the volume or press to decrease the volume 4. Operating the Phone 4.1. Dialing an IP Address Speaker Lift the handset or press the SPEAKER button Dial an IP address For example: dialing 192.168.0.1 MNO WXYZ ABC TUV @ Press OK or wait until the timer expires to dial. 4.2. Dialing a SIP Number Speaker Lift the handset or press the SPEAKER button Dial a SIP Number For example: dialing 1866 MNO
ページ19に含まれる内容の要旨
4.4. Answer a Phone Call Note: The CANCEL key may be used to reject a call. When the phone rings: Speaker Lift the handset or press the SPEAKER button to begin your conversation. 4.5. Switch to another Line While having a conversation: Hold Press Hold to switch to another line. 4.6. Mute Note: While mute is activated, sound from the caller can be heard from your speaker but your sound can’t be heard by the caller. While having a conversation: Press Mute Press the M
ページ20に含まれる内容の要旨
Redial Press Redial to dial the last dialed number. 4.8.2. Through Call History Redial Press Redial . Do not lift the handset when you press Redial. Redial Press Redial again to cycle through the dialed, missed, and received calls. Press DOWN key to scroll down through the dialed, missed, or received lists until the number is displayed on the screen. Pick up the handset or press OK 4.9. On Hold Note: To transfer a call while on hold, press the TRANSFER key. Dial the extension
