ページ1に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 1
User Manual (Part 2)
2.4 GHz Cordless
Telephone
E2715B/E1215B
with Caller ID & Call Waiting
ページ2に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 2 You must install and See page 7 charge battery before STOP! for easy instructions. using the telephone. For customer service or product Please also read information, visit our web site at Important Product Information www.telephones.att.com Enclosed in product package. or call 1-800-222-3111. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use on
ページ3に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 1 User Manual (Part 2) 2.4 GHz Cordless Telephone E2715B/E1215B with Caller ID & Call Waiting Table of contents Getting Started Caller ID Logs Quick reference guide ........................2 How Caller ID works .......................20 Parts checklist.......................................4 To review your call log.....................21 Before you begin ..................................5 Telephone base installation...............
ページ4に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 2 Getting Started Quick reference guide Handset Select/Menu V CID Press to display menu, or to select Press to scroll down in menus. highlighted item from menu. Press when phone is not in use to display Caller ID information (see page 21). While entering names, press to move the cursor ^ DIR to the left. Press to scroll up in menus. Press when phone is not in use to display phone book entries (see page 16). While entering names, p
ページ5に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 3 Getting Started Quick reference guide Telephone Base Handset Locator New Voice Mail Press to locate handset if lost Flashes when you have new voice mail (see page 10). (requires voice mail service from your local telephone company). Charging In Use On when handset battery is On when handset is in use. Flashes when another phone charging. is in use on the same line. 3
ページ6に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 4 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Telephone handsets Charger Power adapters Belt clips Batteries Telephone line cord Wall mount bracket 4
ページ7に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 5 Getting Started Before you begin About Caller Identification Telephone operating range Caller ID with Call Waiting features in This cordless telephone operates with this telephone let you see who’s calling the maximum power allowed by the before you answer the phone, even Federal Communications Commission when you’re on another call. These (FCC). Even so, this handset and base features require services provided by can communicate
ページ8に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:37 PM Page 6 Getting Started Telephone base installation Install the telephone base as shown below. Choose a base location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug power cord Plug telephone transformer into line cord into electrical outlet. telephone jack. NOTE: Use only the power cord supplied with this product. If you need a replacem
ページ9に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 7 Getting Started Battery installation & charging After battery installation, place the handsets in their base unit or charger and allow to charge for 12 hours before use. You can keep the batteries charged by returning the handsets to their base unit or charger after each use. When the battery is fully depleted, a recharge takes about 10 hours. Average talk time on a fully charged battery is about six hours depending on environmen
ページ10に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 8 Getting Started Wall mounting The base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Install the line cord as shown in the diagram. Connect cords as shown on page 6, then press and slide down firmly so base is held securely on outlet mounting pegs. Plu
ページ11に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap). 9
ページ12に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 10 Telephone Operation Elapsed time Basic operation Making and answering calls PHONE 00:00:12 To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER, then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial. Press DELETE or CLEAR at any time to make corrections as you are entering numbers. The scr
ページ13に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 11 Telephone Operation Options while on calls Volume control Press the VOLUME buttons on the side of the handset to adjust listening volume. Each button press raises or Volume lowers volume by one level. When you change the volume level, the new setting becomes the default. The new volume level will be Flash applied each time you use the handset, speakerphone or headset. Call waiting If you have Call Waiting service, you will hear
ページ14に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 12 Telephone Operation Intercom calls Intercom calls Use the intercom feature to have conversations between the handsets. Press the INTERCOM button on a handset to initiate an intercom call. This handset will call the other handset. Press PHONE, INTERCOM, SPEAKER or any dial pad key on the handset being paged to enter intercom mode with the first handset. Press OFF or INTERCOM at the handset (or place the handset in the charger or
ページ15に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 13 Telephone Operation Call Forward and Call Transfer Call Forward and Call Transfer An external call can be forwarded or transferred from one handset to the other. The difference between for- ward and transfer depends on if the sending handset needs to talk with the receiving handset before the external call is sent to the other handset. Call Forward • The first handset (HS1) can forward an external call to the other handset (HS2)
ページ16に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 14 Telephone Operation Highlighted menu item Handset settings At the feature menu you can change settings to > DIRECTORY customize how the telephone works. CALL LOG Press MENU, then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > symbol. Press SELECT to select the highlighted item. Press OFF at any time to cancel an operation, back up
ページ17に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 15 Telephone Operation Handset settings Handset name HANDSET NAME AT&T_ At this menu you can customize the name that appears on the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 17 to enter letters). Press SELECT to confirm. Language LANGUAGE At this menu you can select the language used in all ENGLISH menus and screen displ
ページ18に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 16 Phone book Shared phone book directory Pat Williams The phone book directory is stored in the base, and is 555-1234 shared by both handsets. Changes made at either hand- set will be reflected in both. Only one handset at a time can use the phone book. If a second handset attempts to use the phone book, the screen will display NOT AVAILABLE AT THIS TIME. Memory capacity The phone book directory can store up to 50 entries. Each en
ページ19に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 17 Phone book AT&T New phone book entries To create a new phone book entry Press MENU twice to select DIRECTORY. Press V to highlight STORE. Press SELECT, then enter the telephone number when prompted. > DIRECTORY CALL LOG Use the dial pad to enter up to 32 digits, then press SELECT. You will be notified if the number is already in your phone book. To insert a number from your redial list, press REDIAL, then ^V to find the number
ページ20に含まれる内容の要旨
91-000272-010-000_E2715B&E1215B_R0.qxd 2/23/2005 5:38 PM Page 18 Phone book AT&T Phone book search Press DIR to display the first listing in the phone book. You can then use the ^ or V to browse through the phone book, or search to find a specific entry. Press OFF at any time to exit the directory. Andrew 555-6789 To browse through the directory To browse, press ^ or V to scroll through all entries one by one. Entries will be displayed alphabeti- cally by the first letter in the name. Barbara
