ページ11に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 9 TELEPHONE OPERATION Temporary Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services. 1 Dial the number. 2 Press *. Buttons pressed after this send touch tone signals. 3 After you hang up, the phone automatically returns to dial pulse (rotary) service. Handset Ringer
ページ12に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 10 TELEPHONE OPERATION Headset Jack You can use this telephone hands-free when you install a 2.5 mm headset (AT&T SKU# 24099), purchased separately. Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely. Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this
ページ13に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 11 TELEPHONE MEMORY This cordless phone can store 10 telephone numbers, each up to 16 digits long. You can dial numbers stored in memory just by pressing M and a number button. Store Memory Numbers 1 Make sure the handset is off. 2 Press G. The PHONE light blinks. 3 Press the number button (0–9) where you want to store the telephone number. 4 Dial the telephone number (up to 16 Store a Pause digits) in a Memory — OR — Number Press R to Press to store a sto
ページ14に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 12 ANSWERING SYSTEM OPERATION AT THE BASE Audible Indicators This system gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation. About Mailboxes This answering system has three voice mailboxes. Callers using a touch tone phone can select the mailbox in which their messages will be recorded by pressing #1,#2, or #3 after the system answers the call. All other messages will be recorded in Mailbox
ページ15に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 13 ANSWERING SYSTEM OPERATION AT THE BASE Record outgoing Turn Answering announcement System on or off Delete outgoing announcement, messages Confirm/review Enter Answering feature setting System feature Select a setup and choose feature setting a feature to set Record Your Announcement NOTE: If you have assigned different mailboxes to different people, be sure to tell callers in your announcement to press #1,#2, or #3 to leave a message in the appropriate m
ページ16に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 14 ANSWERING SYSTEM OPERATION AT THE BASE Answering System Feature Setup You can set up one feature at a time, or you can set up a feature and then move on to set up another feature. 1 Make sure the answering system is on. 2 Press and release U until you hear the system announce the feature you want to set. Refer to the “Feature Summary” below for a description of the features and your choices. 3 Press S to hear the feature’s settings. 4 Press t to confirm y
ページ17に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 15 ANSWERING SYSTEM OPERATION AT THE BASE Listen To, Save & Delete Messages The system automatically saves your messages until you delete them, and can store approximately 15 minutes of messages, memos, and announcements (up to a maximum of 99 messages). After playing a message, the system announces the day and time it was received. While the message plays, the Message Window displays the number of the message. After playing the last message in a mailbox, th
ページ18に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 16 ANSWERING SYSTEM OPERATION AT THE BASE Call Screening/Intercept 1 Make sure the answering system is on, and set the message playback volume control above level 1 so you can hear the caller’s message. 2 If you decide to take the call, press P on the handset. 3 If you pick up an extension phone during the announcement and the announcement does not stop right away,press and release the telephone switchhook. Record a Memo You can record a memo up to four minu
ページ19に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 17 ANSWERING SYSTEM OPERATION AT TOUCH TONE PHONE Connect with the Answering System You can access many features of this system remotely from a touch tone phone. 1 Dial your telephone number. 2 When the system answers, press #, then enter your Remote Access Code (preset to 19). The system beeps twice. 3 Within two seconds, enter a remote command (see “Remote Access Commands” on page 18). 4 Press *0 to exit remote operation. Voice Menu The system has voice pr
ページ20に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 18 ANSWERING SYSTEM OPERATION AT TOUCH TONE PHONE Remote Access Commands Function: Command: Play messages in Press #, then the appropriate mailbox a mailbox number (1,2, or 3). The system plays new messages. If there are no new messages, the system plays old messages. Repeat a message Press #4 while message is playing; each press backs up another message. Skip a message Press #6 while message is playing; each press advances another message. Stop Press #5. S
ページ1に含まれる内容の要旨
DELETE
9351_book_2ATT 1/1/01 3:33 PM Page ii
USER’S MANUAL
Part 2
900 MHz Cordless Telephone/
Answering System 9351
REVISED
1/1/01
Please also read
Part 1 — Important
Product Information
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
ページ2に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page iii © 2000 Advanced American Telephones. All rights reserved. Printed in China. 850004375 Issue 2AT&T 12/00
ページ3に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 1 CONTENTS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ANSWERING SYSTEM OPERATION At the Base ................................ 12 Before You Install .......................... 2 Audible Indicators....................... 12 Table/Desk Installation ................. 4 About Mailboxes......................... 12 Wall Installation ............................ 5 About Announcements ............... 12 Record Your Announcement....... 13 TELEP
ページ4に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 2 INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. 2 Install the handset battery. a) Remove battery compartment cover by pressing on the indentation and sliding downward. c) Place battery pack in compartment with the wires in the lower left corner, along the bottom of the b
ページ5に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 3 INSTALLATION 3 Attach the belt clip to the cordless handset (optional). To attach To remove 3
ページ6に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 4 INSTALLATION Table/Desk Installation Standard Modular electrical outlet telephone jack 1 Connect the telephone line cord. 2 Connect the power cord. The ANSWER ON/OFF light goes on, and CL flashes in the Message Window. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111. 3 Charge the handset battery. Place the handset in the base. Charge the battery for at least 24 hours the first time. After the first charge
ページ7に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 5 INSTALLATION Wall Installation 1 Position the wall mount adapter on the base. Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place. 2 Connect the telephone line cord. 3 Connect the power cord. The ANSWER ON/OFF light goes on, and CL flashes in the Message Window. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111. 5
ページ8に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 6 INSTALLATION 4 Mount the base on the wall. a) Align holes on base with mounting studs on wall jack. b) Place power cord as shown, c) Pull base down so it hangs on mounting straight down studs until it between base locks into place. and wall. 5 Follow Steps 3–5 in “Table/Desk Installation.” 6
ページ9に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 7 TELEPHONE OPERATION Handset Volume Adjust volume of what you hear through the handset. Redial Follow the instructions under “Make or Answer a Call,” then press R to call the last number dialed (up to 24 digits). Make or Answer a Call End a Call Lift handset Place handset from base in base — OR — — OR — Press O. Press P and wait for light to Exit go on steadily. programming. Flash/ Cancel a page. Call Waiting Access special telephone company subscriber
ページ10に含まれる内容の要旨
9351_book_2ATT 1/1/01 3:33 PM Page 8 TELEPHONE OPERATION Indicates base Flashes when a call is coming Indicates Indicates is connected to in; on steadily when any spare battery handset AC power phone on this line is in use is installed is in base Page/Handset Locator Spare battery Press once to page the handset for up compartment to one minute; press twice to cancel. 8
