ページ1に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page II
USER’S MANUAL
Part 2
5.8 GHz Cordless Telephone
Answering System 3358
with Caller ID/Call Waiting
3358
Please also read
Part 1 — Important
Product Information
© 2003 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced American Telephones.
ページ2に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page III Visit us at www.telephones.att.com © 2003 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 05/03
ページ3に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page V CONTENTS BEFORE YOU BEGIN .............. 1 Conference Calling............................... 35 Parts List .......................................................... 1 PHONE BOOK .................... 36 About Caller Identification Store a Number and Name in (Caller ID)............................................... 2 Phone Book ....................................... 36 About the Calls Log ............................... 2 Keypad Characters.
ページ4に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 1 BEFORE YOU BEGIN Parts List Your box should include: Wallet Card This User’s Manual Quick Start Guide 2 Remote Chargers Base Unit 3358 3 Cordless Handsets 3 Belt Clips 2 Remote Charger 3 NiMH Battery Packs Wall Mount Adapters Power Cord Telephone Line Cords Wall Mount Adapter 1 BEFORE Y BEFORE Y OU OU BEGIN BEGIN
ページ5に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 2 About Caller Identification (Caller ID) This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting, but as separate service
ページ6に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 3 INSTALLATION Table/Desk Installation NOTE: Install this telephone away from electronic equipment, such as ¥¥ personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 1 Connect the telephone line cord. 2 Connect the power cord. CCLL flashes in the message window. Standard Modular electrical telephone outlet jack Use only the power cord supplied with this product. If you need a replacement, call 1
ページ7に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 4 3 Install the handset battery. Use only AT&T Battery 2401, SKU# 91077. a) Remove battery b) Align the contacts and place compartment cover by the battery pack in the pressing on indentation battery compartment. and sliding downward. c) Replace cover by sliding it on its track up over battery case until it snaps firmly into place. 4 Charge the handset battery. • Place the handset in the base or remote charger. • Charge the battery at least 12
ページ8に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 5 About Handset Registration 1 The cordless handsets that came with your system are automatically registered as Handset 1,Handset 2, and Handset 3.There is no need to re-register. 2 You may register up to a total of six Expansion Handsets to this telephone system(Model 5800 handset sold separately). 3 Additional handsets will be assigned Handset 4, Handset 5, and Handset 6. 4 When you install the handset battery pack, the handset will disp
ページ9に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 6 Wall Installation 1 Connect the power cord and telephone line cord to the underside of the base, as shown (figure a). 2 Position the mounting bracket as shown (figure b). 3 Feed the telephone line cord through figure a the hole in the center of the mounting bracket (figure b), align the bracket with the base, and slide it into the hole on the base as shown (figure c). 4 Lock the mounting bracket in place (figure d). 5 Plug the telephone line c
ページ10に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 7 Spare Battery/Power Failure Backup You can buy a spare handset battery (AT&T Battery 2401, SKU# 91077, sold separately) and keep it charged in the base at all times. In the event of a power failure, a fully charged battery in the spare battery compartment will allow you to make and receive calls from the cordless 1 handset only for up to 2 / hours. 2 The spare battery will fully charge in 24 hours. 7 INSTALLATION INSTALLATION
ページ11に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 8 Belt Clip You may choose to use the optional belt clip with your handset. b) Press tabs a) Slide c) To remove, down on belt clip lift one side into into slots with your on back of grooves. thumbnail handset to and push reattach. back. Headset You can use this telephone hands-free when you install any industry standard 2.5 mm headset . For best results use an AT&T 2.5 mm headset. Plug the headset into the jack located on the left side of the h
ページ12に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 9 FEATURE SETUP – HANDSET Feature Setup Menu MENU Press the softkey under to enter the Feature Setup menu. Use or to choose features, then select OK to save your choice. NOTE: If you wait more than 20 seconds without ¥¥ pressing a key, the handset returns to the idle screen. NOTE: If you receive an incoming call while in ¥¥ feature setup, the phone automatically exits the menu to let you take the call. Set Time You can choose to set the time man
ページ13に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 10 Clock Mode You can choose to display the time when the phone is idle at the handset, or you can turn this feature off. The default setting is ON. 1 Press MENU . 2 Press until the screen highlights INTERCOM HANDSET SETTINGS SET TIME CLOCK MODE CLOCK MODE OK iiiiiiiii iiiiii OK 3Press .The screen displays CLOCK ENABLE ON OFF OK ON OFF ON 4Press or . OK 5 Press to save the displayed setting. REGISTER You can refer to page 5. 10 FEATURE SETUP
ページ14に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 11 Sound Select This telephone uses the latest acoustic receiver design, providing you with four different sound quality settings. During a call, you can adjust the quality of the sound. Pressing repeatedly will cycle you through four different responses. NOTE: The mid-boost setting is hearing-aid ¥¥ compatible. BASS – Low frequency sounds enhanced. MID – Mid-range sounds enhanced. ppp pp TREBLE – High frequency sounds enhanced. NATURAL – No fre
ページ15に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 12 Ringer Volume Adjust the volume of the handset ringer. Setting the volume so that no bars show on the graph turns the ringer off. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. OK 2 Press . OK 3Press when RRIINNGGEERR VVOOLLUUMMEE is highlighted. The screen displays RINGER iiiiiiiii iiiiii VOLUME OK 4 Press or to hear samples of ring volumes. OK 5 Press to save the displayed setting. 12 FEATURE SETUP – HAND
ページ16に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 13 Ringer Melody The Ringer Melody sets which ringer you hear when you have an outside call. The Ringer Melody default setting is #01; there are eight Ringer Melody selections. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. 2 Press OK , then until the screen highlights RRIINNGGEERR MMEELLOODDYY. OK 3Press .The screen displays iiiiiiiii iiiiii RINGER #01 OK 4Press or to display desired setting. A sample of the
ページ17に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 14 Low Batt Tone You can set the handset to sound a tone when battery power is low, or you can turn the tone off. Default setting isOONN. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. OK 2 Press , then until the screen LLOOWW BBAATTTT TTOONNEE highlights . OK 3Press The screen displays LOW BATTERY TONE iiiiiiiii iiiiii ON OFF OK ON OFF ON 4Press or . OK 5 Press to save the displayed setting. 14 FEATURE SETUP
ページ18に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 15 Range T one You can set the handset to sound a tone when you are approaching the range limit, or you can turn this tone off. The default setting isOONN. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. OK 2 Press , then until the screen RRAANNGGEE TTOONNEE highlights . OK 3Press The screen displays RANGE TONE iiiiiiiii iiiiii ON OFF OK ON OFF ON 4Press or . OK 5 Press to save the displayed setting. 15 FEA FEA
ページ19に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 16 Keypad T one When this feature is on, each key press makes a sound. The default setting is OONN. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. OK 2 Press , then until the screen KKEEYYPPAADD TTOONNEE highlights . OK 3Press The screen displays KEYPAD TONE ON iiiiiiiii iiiiii OFF OK ON OFF ON 4Press or . OK 5 Press to save the displayed setting. 16 FEATURE SETUP – HANDSET FEATURE SETUP – HANDSET
ページ20に含まれる内容の要旨
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 17 Set Contrast You can adjust the screen contrast for easy viewing. 1 Press MENU , then until the screen highlights HHAANNDDSSEETT SSEETTTTIINNGGSS. OK 2 Press , then until the screen CCOONNTTRRAASSTT highlights . OK 3Press The screen displays CONTRAST iiiiiiiii iiiiii OK 4 Press or to decrease or increase contrast. OK 5 Press to save the displayed setting. 17 FEA FEATURE SETUP – HANDSET TURE SETUP – HANDSET
