ページ1に含まれる内容の要旨
USER’S MANUAL
Pa rt 2
2.4 GHz Cordless Telephone
2320 with Caller ID/Call W a i t i n g
Please also read
Part 1 — Important
Product Information
© 2002 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp. licensed to Advanced American Telephones.
ページ2に含まれる内容の要旨
Visit us at www.telephones.att.com © 2002 Advanced American Telephones. All rights reserved. AT&T and the Globe Design are trademarks of AT&TCorp. licensed to Advanced American Telephones. Printed in China. Issue 2AT&T 08/02
ページ3に含まれる内容の要旨
CONTENTS BEFORE YOU BEGIN . . . . . . 1 PHONE BOOK . . . . . . . . . . 26 Parts List . . . . . . . . . . . . . . . 1 Store a Number and Name About Caller Identification in Phone Book . . . . . . . . . 26 (Caller ID). . . . . . . . . . . . . 2 Dial a Number About the Call Log . . . . . . . . 2 in Phone Book . . . . . . . . . 29 About Adding Handsets . . . . . 2 Edit a Number/Name in Phone Book . . . . . . . . . 30 INSTALLATION . . . . . . . . . . 3 Delete a Number/Name Base Installation .
ページ4に含まれる内容の要旨
BEFORE YOU BEGIN P a rts List Your box should include: This User’s Quick Manual Start Guide Power Handset adapter Telephone line cord NiCd battery pack Base unit 1
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN About Caller Identification (Caller ID) This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting,but as separate services (you may need combined service) •
ページ6に含まれる内容の要旨
INSTALLATION Base Installation NOTE: Install the base unit away from electronic equipment, ¥ such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 1 Connect the power cord to the base and an electrical outlet not controlled by a wall switch. Standard Modular electrical telephone 2 Connect the outlet jack telephone line cord. Use only the power cord supplied with this product. If you need a replacement,call 1 800 222–3111. 3
ページ7に含まれる内容の要旨
3 Install the handset battery. Use only AT&T Battery 3301,SKU# 91076. a) Remove battery b) Plug the battery pack compartment cover by connector into handset. pressing on indentation Place the battery pack and and sliding downward. wires in the compartment. c ) Replace cover by sliding it on its t ra ck up over b a t t e ry case until it snaps f i rm ly into place. 4 Charge the handset battery. • Place the handset in the base. • Charge the battery for at least 12 hours. After the first charge,th
ページ8に含まれる内容の要旨
Headset You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely. 5
ページ9に含まれる内容の要旨
FEATURE SETUP F e a t u re Setup Menu NOTE: When you follow the directions to “Clear ¥ Message Waiting”or “Set Dial Method” you change settings for ALL registered handsets.All other features must be set separately at each handset. (See “About Adding Handsets”on page 2 for details about additional handsets.) Press to enter the Feature Setup menu. Use or to choose features,then press to save your choice. Press at any time to return to the previous menu item. Press repeatedly to exit Feature Setu
ページ10に含まれる内容の要旨
Ring V o l u m e Adjust the volume of the handset r i n ge r. Setting v o l u m e to t u rns the ri n ger off and displays the r i n ger off icon ( ) on scre e n . The default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Use the keypad to enter a volume setting ( – ) — OR — Press or to hear samples of ring volumes. 5 Press to save desired setting. 7
ページ11に含まれる内容の要旨
Ring Pattern The external ring pattern sets which ringer you hear when you have an outside call. The internal ring pattern sets which ringer you hear when you have an intercom call from another registered handset (if installed). External ring pattern default setting is ; intercom ring pattern default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Press or then to choose or . 5 Use the keypad to enter a ring pattern selection ( – )
ページ12に含まれる内容の要旨
Key Click When this feature is on,each key press makes a sound. Default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Press or to select . — OR — Press or to select . 5 Press to save the displayed setting. 9
ページ13に含まれる内容の要旨
Handset Name You can customize the handset to display a name or word of your choice (up to 16 characters) in place of • on the idle screen and • (during intercom calls). The default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Use the keypad and the ch a rt on page 27 to enter a handset name. 5 Press to save the displayed name. To change the name again at any time,simply repeat Steps 1-5. 1 0
ページ14に含まれる内容の要旨
Language Setting You can set each registered handset so the display appears in English, Spanish, or French. The default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays the current language 4 Press or to scroll through the language choices. 5 Press to save the displayed language. The display will show in the language you have selected. 1 1
ページ15に含まれる内容の要旨
Clear Message W a i t i n g If you subscribe to telephone company voice mail service,and the message waiting indicator remains on even after you have reviewed all messages, follow the directions below to turn off the indicator. NOTE: These steps will clear the message waiting ¥ indicator for ALL registered handsets (See “About Adding Handsets”on page 2 for details about additional handsets.) 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Pre
ページ16に含まれる内容の要旨
Set Dial Method NOTE: When you change the dial method setting ¥ ALL registered handsets are affected. (See “About Adding Handsets”on page 2 for details about additional handsets.) This phone comes set for touch tone ( ) dialing. If you have dial pulse (rotary) service, you must set the dial method to . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Press or to select — OR — Press or to select . 5 Press to save the displayed setting. 1 3
ページ17に含まれる内容の要旨
TELEPHONE OPERATION Idle Screen When the handset is within range of the base and not on a call or in Feature Setup mode,the screen displays If you assign a name to the handset (see “Handset Name”on page 10),that name will be displayed instead of . Make a Call 1 Press , then dial the number — OR — Dial the number, then press . 2 To end the call,press again — OR — Place the handset in the base. Answer a Call 1 Press to answer a call. 2 To end the call,press again — OR — Place the handset in t
ページ18に含まれる内容の要旨
Call Timer When the handset is on a call,the screen displays a timer whether the call is external or intercom. For example: Speakerphone When the handset speakerphone is activated, you can use the phone hands-free. Stand the handset on a flat surface (not in the base) and continue your conversation. Make a Call 1 Press , then dial the number — OR — Dial the number, then press . 2 To end the call,press again — OR — Place the handset in the base. Answer a Call 1 Press to answer a call. 2 To end th
ページ19に含まれる内容の要旨
Redial The last five phone numbers dialed at the handset are stored in redial memory. Press repeatedly until the number you want to call is displayed,then press to dial the displayed number — OR — Press , then press repeatedly until the number you want to call is displayed. Press to dial the displayed number. Flash/Call Waiting If you subscribe to Call Waiting service with your local telephone service provider, you can answer a new incoming call without losing your current call. 1 Press to con
ページ20に含まれる内容の要旨
Page/Handset Locator NOTE: If you have installed additional A T & T ¥ 2300 handsets (purchased sep a ra t e ly) with y o u r 2320 base, p ressing will signal A L L r e gi s t e red handsets. Page the handset(s) from the base by pr e s s i n g . The handset will sound a r e p e a t i n g t o n e . To cancel the page press any key on the handset,or on the base,or wait 60 seconds. T e m p o r a ry Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone di
