ページ1に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page II
USER’S MANUAL
P a rt 2
2.4 GHz Two-Line Cor d l e s s
Speakerphone 1412 with
Caller ID/Call Waiting on Handset
Please also read
Part 1 — Important
Product Information
© 2002 A d vanced A m e rican T e l e p h o n e s . All Rights Reserve d .
AT&T and the Globe Symbol are tr a d e m a rks of A T & TC o r p., licensed to A d vanced A m e rican T e l e p h o n e s .
ページ2に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page III Visit us at www.telephones.att.com © 2002 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 12/02
ページ3に含まれる内容の要旨
1412updatedmanual 2002.12.7 9:20 AM Page IV CONTENTS BEFORE YOU BEGIN.................. 1 DIRECTORY........................... 33 Parts List........................................... 1 Store a Number and Name in About Caller Identification the Directory.............................. 33 (Caller ID).................................... 2 Store a Number from Handset About Call History........................... 2 Redial in the Directory.............. 35 Keypad Characters........................
ページ4に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 1 BEFORE YOU BEGIN P a rts List Your box should include: This User’s Quick Manual Start Guide Base unit Handset 2 Telephone NiCd line cords battery pack Power cord 1
ページ5に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 2 About Caller Identification (Caller ID) This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting,but as separate services (you may need comb
ページ6に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 3 INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. NOTE: Install the base unit away from electronic equipment, ¥ such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 2 Install the handset battery. Use only AT&T Battery 3301:SK
ページ7に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 4 Table/Desk Installation 1 Connect the power cord. Use only the power cord supplied with this product. If you need a replacement,call 1 800 222–3111. 2 Connect the telephone line cord(s). If you have a two-line jack, use only the four-wire (RJ-14) line cord. Connect the line cord from the wall jack to the jack labeled L1/L1+L2 on the base. Make sure the plugs snap firmly into place. Standard electrical outlet Power L1/L1+L2 Jack Cord L1/L2 Modular telephone ja
ページ8に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 5 If you have two separate jacks, use both long line cords. Connect a line cord from the wall jack you wish to designate as your Line 1 to the jack labeled L1/L1+L2 on the back of the base. Connect the other line cord from the remaining wall jack to the jack labeled L2 on the back of the base. Make sure the plugs snap firmly into place. Line 2 Standard Modular electrical telephone outlet jack Power L1/L1+L2 Jack Cord L2 Jack Line 1 Modular telephone jack 3
ページ9に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 6 Wall Installation 1 Reverse the wedge under the base. Place your fingers in the holes as shown and swing the top of the wedge down. 2 Connect the power cord and place the cord as shown. Use only the power cord supplied with this pr o d u c t . If you need a re p l a c e m e n t , call 1 800 222–3111. 3 Connect the telephone line cor d ( s ) . If you have a two-line jack, use only the four-wire (RJ-14) line cord. Connect the line cord from the wall jack to the ja
ページ10に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 7 If you have two separate jacks, use both long line cords. Connect a line cord from the wall jack you wish to designate as your Line 1 to the jack labeled L1/L1+L2 on the back of the base. Connect the other line cord from the remaining wall jack to the jack labeled L2 on the back of the base. Make sure the plugs snap firmly into place. L1/L1+L2 Jack L2 Jack Line 1 Modular telephone Standard jack electrical outlet Line 2 Modular telephone jack 4 Mount base on
ページ11に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 8 Belt Clip You may choose to use the optional belt clip with your handset. To attach To remove H e a d s e t You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purc h a s e d s e p a ra t e ly ) . For best results use an AT&T 2.5 mm headset. Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection,but make sure the plug fits securely. 8
ページ12に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 9 Data Port If you want to connect another device (such as a modem or fax machine) to the wall jack, you can use the jack on the phone labeled DATA. A call picked up at another extension may interrupt a fax, modem or message transmission. DATA Port 9
ページ13に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 10 F E ATURE SETUP F e a t u re Setup Menu Press to enter the Feature Setup Menu. Use or to scroll through choices,then press to enter your selection. Press at any time during Feature Setup to exit Feature Setup and return to the idle screen. 1 0
ページ14に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 11 Set Line 1 Ringer Turn the handset ringer for Line 1 on or off and choose the ringer type when the handset ringer is turned on. The phone comes with the handset ringers for both lines turned on and set to . 1 Press . The screen displays AM 2 Press . The screen displays the current setting and looks similar to AM 3 Use or to switch between and . 4 If you set the Line 1 Ringer to , press to save the setting. — OR — If you set the Line 1 Ringer to , press , , or o
ページ15に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 12 Set Line 2 Ringer Turn the handset ringer for Line 2 on or off and choose the ringer type when the handset ringer is turned on. The phone comes with the handset ringers for both lines turned on and set to . 1 Press , then press . The screen displays AM 2 Press . The screen displays the current setting and looks similar to AM 3 Press or to switch between and . 4 If you set the Line 2 Ringer to , press to save the setting. — OR — If you set the Line 2 Ringer to ,
ページ16に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 13 Set Voice Messages Indicators If you subscribe to Voice Mail service with your local telephone service provider, you can choose how you want this phone to indicate that you have Voice Mail messages for each line. Choosing or affects the handset voice messages indicator for that line and the MESSAGES light on the base.Choosing will turn off the handset voice messages indicator and the MESSAGES WAITING light on the base will not show messages waiting. The phone co
ページ17に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 14 Set T i m e The date and time are automatically set with incoming call information. You can set the clock manually if you wish. NOTE: After you replace the handset batteries ¥ and base AC power, the date and time will be reset to . 1 Press . The screen displays AM 2 Press or until the screen displays AM 3 Press . The screen displays AM and the component to be changed blinks. 4 Use the keypad to enter the correct hour and minutes setting. Then use or to switch be
ページ18に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 15 Set Date The date and time are automatically set with incoming call information. You can set the date manually if you wish. NOTE: After you replace the handset batteries ¥ and base AC power, the date and time will be reset to . 1 Press . The screen displays AM 2 Press or until the screen displays AM 3 Press . The screen displays AM 4 Use the keypad to enter the correct month and day setting. 5 When the desired date is displayed,press to save the setting. 1 5
ページ19に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 16 Set Dial Mode This phone comes set for touch tone ( ) dialing. If you have dial pulse (rotary) service, you must set the dial mode to . 1 Press . The screen displays AM 2 Press or until the screen displays AM 3 Press . The screen displays AM 4 Use or to switch between and . 5 When your desired setting is displayed,press to save the setting. 1 6
ページ20に含まれる内容の要旨
1412 2002.12.7 9:20 AM Page 17 TELEPHONE OPERA T I O N Idle Scr e e n When the handset is within range of the base and not on a call or in feature setup mode,the screen displays AM Other icons may also be displayed. See “Display Screen Icons” for more information. Make a Call At the handset 1 Press a or , then dial the number —OR— Dial the number, then press a or . 2 To end the call,press the button again —OR— Place the handset in the base. At the Base 1 Press a or , then dial the number. The
