ページ1に含まれる内容の要旨
FREE STANDING
ELECTRIC COOKER
WITH GAS HOB
ZCM 1000X
INSTRUCTION BOOKLET
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the information in this book contact the Customer Care Department. Telephone 0870 5 727727. Ensure that the vents at the top of the oven are INSTALLATION not obstructed to ensure ventilation of the oven The appliance must be installed according to the c
ページ3に含まれる内容の要旨
CONTENTS FOR THE USER Important Safety Information 2 Description of the Appliance 4 Rating Plates 5 Before Using the Appliance 5 Location 5 The Gas Hob 6 Uses of the Hob 6 To Light the Hob Burners 7 Things to Note 7 Hints & Tips 7 The Timber Surround 7 Accessories – Chopping board 7 Helpful Hints When Buying and Preparing Food 8 Care and Cleaning 9 Cleaning Materials 9 Cleaning the Hob 9 Cleaning the Hob Burner Parts and Pan Support 10 Hints & Tips 10 Replacing the Hob Burner Parts 10 Replacing
ページ4に含まれる内容の要旨
DESCRIPTION OF THE APPLIANCE SLOT IN ELECTRIC COOKER WITH GAS HOB The appliance contains a multifunction oven which comprises a number of different cooking functions and a full width grill. The gas hob with five burners is fitted with automatic ignition. RATING PLATES The Hob: This is situated on the underside of the right hand side of the hob, above the towel rail. The Oven: This is situated on the front fame of the oven upon opening the door. The appliance must be protected by a suitably rate
ページ5に含まれる内容の要旨
BEFORE USING THE APPLIANCE IMPORTANT Please read both this and the accompanying ZBM 799 Instruction Book before installing or using this appliance and retain for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owners can get to know the functions of the new appliance and the relevant warnings. FOR OPERATING INSTRUCTIONS ON THE USE AND INSTALLATION OF THE OVEN PLEASE REFER TO THE ZBM 799 INSTRUCTION BOOK.
ページ6に含まれる内容の要旨
THE GAS HOB USES OF THE HOB The gas hob has four different burner sizes to suit different types of cooking: To ensure maximum burner efficiency only use pots and pans with flat bases appropriate to the burner size used. Burner Minimum Maximum Pan Size Pan Size Ultra Rapid 160mm (6½”) 300m (11½”) Rapid 120mm (5”) 200mm (8”) Normal 120mm (5”) 200mm (8”) Simmer 120mm (5”) 200mm (8”) Ensure the pan support is correctly fitted before using the hob. See page 11. HOW TO LIGHT THE HOB BURNERS The hob i
ページ7に含まれる内容の要旨
THINGS TO NOTE THE TIMBER SURROUND If you are having any difficulty lighting a hob There will be some pattern, colour and grain burner turn all the hob controls off and make differences over the timber surfaces. This is a sure the burner parts have been replaced normal characteristic of the appearance of correctly. wooden products. See page 11 for more information. Please note that timber surfaces will weather over time as they are exposed to light. HINTS AND TIPS Keep flames under the b
ページ8に含まれる内容の要旨
HELPFUL HINTS WHEN BUYING AND PREPARING FOOD Care must be taken when handling foods in the 11. If not eaten straight away after cooking, food home. Always follow the basic rules of food hygiene should be cooled as quickly as possible (within to prevent bacterial and microbial growth and cross one hour) and then refrigerated or frozen as contamination when preparing, reheating, cooking, required. Do not put hot food into a refrigerator cooling, defrosting and freezing foods. or freezer. 12. In
ページ9に含まれる内容の要旨
CARE AND CLEANING For hygiene and safety reasons you must keep this cooker clean. A build up of fat or other foodstuff could cause a fire. Before cleaning the cooker always ensure the cooker is cool before switching off the supply. Do not use any polishes, caustic cleaners, abrasives, washing soda or soap powder except those recommended in this book. If you own a dishwasher please read the operating instructions for the machine before you wash any part of your appliance in it. Clean the applian
ページ10に含まれる内容の要旨
CLEANING THE HOB BURNER PARTS AND PAN SUPPORT Take care not to damage the spark electrodes. If damaged they will not light. Please note that due to the nature of stainless steel the pan support will tarnish through use over a period of time. Some of this discolouration may be removed by using proprietary cleaning agents. Remove the burner parts carefully taking care not to damage the spark electrodes. Clean the pan support, burner caps and burner crowns in hot water to which a little washing
ページ11に含まれる内容の要旨
REPLACING THE HOB BURNER PARTS 1. Crown to burner body Do not force the crown on to the burner body. Make sure the hole in the crown is over the electrode. Check that the location pegs sit in the slots in the body. Check that the crown can be moved slightly from side to side. 2. Cap to crown Place the burner cap centrally on top of the crown with the enamel side up. Move sideways and front to back to check the cap is properly fitted. 3. Check for ignition If a burner will not light, check the
ページ12に含まれる内容の要旨
SOMETHING NOT WORKING? Please carry out the following checks on your appliance before calling a Service Engineer. It may be that the problem is a simple one which you can solve yourself without the expense of a service call. If our Service Engineer finds that the problem is listed below you will be charged for the call whether or not the appliance is under guarantee. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. PROBLEM POSSIBLE SOLUTION F
ページ13に含まれる内容の要旨
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you have
ページ14に含まれる内容の要旨
GUARANTEE CONDITIONS STANDARD GUARANTEE CONDITIONS We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has be
ページ15に含まれる内容の要旨
TECHNI TECHNIC CA AL L DET DETA AIIL LS S Loading info : Gas hotplate Natural gas L.H.F. – Simmer - 1.0 Kw ( 3412 Btu/h ) Injector marking 070 L.H.R. / R.H.R. – Normal- 1.8 Kw ( 6142 Btu/h ) Injector marking 096 R.H.F. – Rapid - 2.8 Kw ( 9554 Btu/h ) Injector marking 119 Centre. – Ultra Rapid - 3.5Kw ( 11942 Btu/h ) Injector marking 136 Physical Characteristics – Height: 940 mm Width: 1050 mm Depth: 600 mm (excluding handles) Weight: 100 Kg Net Gas connection :- Rear right hand side of appli
ページ16に含まれる内容の要旨
INSTALLATION INSTRUCTIONS For Instructions relating to the oven please refer to the ZBM 799 Instruction Book WARNINGS This appliance must be installed by a qualified electrician/competent person (CORGI Registered). Safety may be impaired if installation is not carried out in accordance with these instructions. Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. The rating plate can be seen by opening the ov
ページ17に含まれる内容の要旨
INSTALLATION INSTRUCTIONS MOVING THE APPLIANCE You may damage some soft or badly fitted floor coverings when you move the appliance. The floor coverings under the appliance should be securely fixed so it does not ruck up when you move the appliance across it. Two people may be required to move the appliance. 1. Remove all oven furniture. 2. Close the oven door. 3. Lift the appliance by holding the bottom of the wooden side panels. 4. This appliance is heavy and care must be taken when moving it
ページ18に含まれる内容の要旨
INSTALLATION INSTRUCTIONS LOCATION OF APPLIANCE This appliance is not for commercial use and must only be installed in domestic premises. 3 This appliance must not be installed in a bed-sitting room of volume less than 20m or in a bathroom, shower or garage. This is a type ‘X’ appliance, it is essential that the appliance is positioned as stated below i.e. shelves, wall cabinets and cooker hoods must be fitted a minimum of 750mm directly above the top of the hotplate (or greater for cooker hoo
ページ19に含まれる内容の要旨
INSTALLATION INSTRUCTIONS CONNECTING TO THE ELECTRICITY SUPPLY WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING. This appliance must be connected to 230V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug, fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. If this is not long enough, the supply cable can be replaced 2 totally by a longer cable at least
ページ20に含まれる内容の要旨
INSTALLATION INSTRUCTIONS CONNECTING TO GAS This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be 3 less than R /8. Connection is made to the Rc ½ (½” B>S>P>) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE: ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply
