ページ1に含まれる内容の要旨
KM-C2230
Enlarge Display Mode User’s Guide
Please read the User’s Guide before using the
copier.
Keep it close to the copier for easy reference.
ページ2に含まれる内容の要旨
Introduction Introduction This User’s Guide contains details on the operation of the various functions available in the Enlarge Dis- play mode and on the various operating precau- tions. In order to ensure that this machine is used correctly and efficiently, carefully read this guide before using the machine. After reading this guide, store it in the designated holder so that it can easily be referred to when questions or problems arise during operation. The model illustrated in this guide
ページ3に含まれる内容の要旨
✎ Contents Contents The topics listed below are described in the Enlarge Display Mode Operations Guide. For details on oth- er topics, refer to the User’s Guide. Additional Information The descriptions in this guide show sample screens with inch measurements. The same setting in screens with metric mea- surements can be specified using the same pro- cedure. 1 Before Making Copies 1.1 Explanation of Guide Conventions.. 1-2 1.2 Control Panel Parts and Their Functions ...........................
ページ4に含まれる内容の要旨
Contents Paper type icons.................................1-15 Paper supply icons.............................1-17 To use the Volume Track mode .........1-18 2 Paper Settings 2.1 Paper Settings ....................................2-2 To specify a non-standard (custom) paper size for the 1st drawer................2-2 To store a non-standard (custom) paper size for the 1st drawer................2-7 To specify a paper size setting for the 1st drawer...........................................2-11
ページ5に含まれる内容の要旨
Contents 4 Useful Operations 4.1 Basic Copying ................................... 4-2 To make copies ................................... 4-2 4.2 Stopping Copying ............................. 4-6 To stop a copy job ............................... 4-6 To restart the copy job......................... 4-7 4.3 Queuing a Copy Job for the Multiple Bypass Tray ....................................... 4-8 To queue a copy job for the multiple bypass tray .......................................... 4-8 4
ページ6に含まれる内容の要旨
Contents To specify different vertical and horizontal scaling proportions (X/Y Zoom settings)............................5-21 5.4 Selecting a Paper Setting ................5-23 To select the Paper setting.................5-24 5.5 Selecting Original Setting................5-26 To select an Original setting...............5-27 5.6 Selecting Copy Settings ..................5-30 To select a Copy setting.....................5-31 5.7 Selecting a Photo/Density Setting ..5-33 To select an Original Imag
ページ7に含まれる内容の要旨
Contents 6.2 Setting the “Enlarge-Display Notice” Function ............................................. 6-5 To specify whether the confirmation message for canceling the Enlarge Display mode appears ........... 6-6 Operations for the confirmation message for canceling the Enlarge Display mode ......................... 6-8 Outline of the Confirmation to Cancel the Enlarge Display Mode ....... 6-9 7 Managing Jobs 7.1 Overview of Jobs............................... 7-2 Jobs..................
ページ8に含まれる内容の要旨
1Before Making Copies 1 This chapter provides information that is important to know before mak- ing copies. Before Making Copies Chapter 1
ページ9に含まれる内容の要旨
✎ ✎ 1.1 Explanation of Guide Conventions 1 1.1 Explanation of Guide Conven- tions CAUTION Failure to observe instructions highlighted in this manner may result in serious injuries or property damage. ➜ Observe all cautions in order to ensure safe use of this machine. Reminder! Text highlighted in this manner indicates opera- tion precautions. Carefully read and observe this type of information. Additional Information Text highlighted in this manner provides more de- tailed information concer
ページ10に含まれる内容の要旨
1.1 Explanation of Guide Conventions 1 [ ] This indicates a key either on the touch panel or on the control panel. 1-3 Before Making Copies Chapter 1
ページ11に含まれる内容の要旨
1.2 Control Panel Parts and Their Functions 1 1.2 Control Panel Parts and Their Functions } Reference For details, refer to “Control Panel” on page 2-12 of the User’s Guide. 1 2 12 3 4 11 8 10 7 6 5 9 No. Part Name Description 1 Touch panel Displays various screens and messages. Specify the various settings by directly touching the panel. 2 Keypad Use to type in the number of copies to be produced. Use to type in the zoom ratio. Use to type in the various settings. 1-4 Before Making Copi
ページ12に含まれる内容の要旨
1.2 Control Panel Parts and Their Functions 1 No. Part Name Description 3 [Access] key If Volume Track mode has been set, press this key after entering the account number and access code in order to use this machine. 4 [Interrupt] Press to enter Interrupt key mode. While the machine is in Interrupt mode, the indicator on the [Interrupt] key lights up in green and the message “Now in Interrupt mode.” appears on the touch panel. To cancel Interrupt mode, press the [Interrupt] key agai
ページ13に含まれる内容の要旨
1.2 Control Panel Parts and Their Functions 1 1 2 12 3 4 11 10 8 7 6 5 9 No. Part Name Description 8 [Start] key Press to start copying. When this machine is ready to begin copying, the indicator on the [Start] key lights up in green. If the indicator on the [Start] key lights up in orange, copying cannot begin. Press to continue an interrupted job. For details on jobs, refer to “Managing Jobs” on page 7-1. 9 [Enlarge Press to enter Enlarge Display] key Display mode. 10 Contrast- Use
ページ14に含まれる内容の要旨
1.2 Control Panel Parts and Their Functions 1 No. Part Name Description 12 [Mode Press to display screens Check] key showing the specified settings. 1-7 Before Making Copies Chapter 1
ページ15に含まれる内容の要旨
1.3 Adjusting the Angle of the Control Panel 1 1.3 Adjusting the Angle of the Con- trol Panel } Reference For details, refer to “Adjusting the Angle of the Control Panel” on page 2-23 of the User’s Guide. The control panel can be adjusted to any of three angles. Adjust the control panel to the angle that al- lows for easy operation. ➀ Upper position (base position) ➁ Middle position ➂ Lower position 1-8 Before Making Copies Chapter 1
ページ16に含まれる内容の要旨
1.3 Adjusting the Angle of the Control Panel 1 To lower the angle of the control panel ➜ Pull the control panel release lever toward you, and then push down on the control panel. To raise the angle of the control panel ➜ Pull the control panel release lever toward you, and then pull up on the control panel. 1-9 Before Making Copies Chapter 1
ページ17に含まれる内容の要旨
1.4 Touch Panel 1 1.4 Touch Panel Displaying the enlarged Basic screen } Reference For details, refer to “Touch Panel” on page 2-14 of the User’s Guide. When this machine is turned on (the power switch is set to “I”), the standard-sized Basic screen ap- pears in the touch panel. ➜ Press the [Enlarge Display] key in the control panel. 1-10 Before Making Copies Chapter 1
ページ18に含まれる内容の要旨
✎ 1.4 Touch Panel 1 The enlarged Basic screen appears in the touch panel. Additional Information Press the [Enlarge Display] key in the control panel to return the Basic screen to its standard size. 1-11 Before Making Copies Chapter 1
ページ19に含まれる内容の要旨
1.4 Touch Panel 1 Touch panel operation To activate a function or to select a setting, lightly touch the desired function or setting shown on the touch panel. CAUTION Do not apply extreme pressure to the touch panel, otherwise it may be scratched or dam- aged. ➜ Never push down on the touch panel with force, and never use a hard or pointed object to make a selection in the touch panel. 1-12 Before Making Copies Chapter 1
ページ20に含まれる内容の要旨
1.4 Touch Panel 1 Keys displayed in the touch panel Touch this key to display the Basic screen. This key appears when there are jobs queued to be printed. Touch this key to display the Job List screen. For details on jobs, refer to chapter 7 “Managing Jobs”. This key appears when there is a mes- sage indicating that a print error oc- curred. Touch this key to display the message, and then perform the neces- sary steps. This key appears when there is a mes- sage indicating that maintenance
