Résumé du contenu de la page N° 1
RC77
Ceramic Hob
User Guide
&
Installation & Service Instructions
U109916 - 02
Résumé du contenu de la page N° 2
Contents 1. Before You Start... 1 2. Ceramic Hob Overview 3 3. Cleaning Your Hob 8 4. Troubleshooting 9 5. Installation 10 6. Circuit Diagram 13 7. Technical Data 14 8. Warranty/After Sales Service 15
Résumé du contenu de la page N° 3
DocNo.012-0001 - Introduction - BI hob ceramic 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you Never operate the hob with wet hands. many years trouble-free cooking if installed and operated Never heat unopened food containers. Pressure correctly. It is important that you read this section before you build up may make the containers burst and cause start, particularly if you have not used a ceramic hob before. injury. This appliance is designed for do
Résumé du contenu de la page N° 4
Hob Care Cleaning Never cook directly on the hob surface. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. Do not use the hob surface as a cutting board. In the interests of hygiene and safety, the hob should be kept Do not leave utensils, foodstuffs or combustible items on clean at all times as a build up in fats and other foodstuffs the hob when it is not is use (e.g. tea towels, frying pans could result in a fire. containing oil). Clean
Résumé du contenu de la page N° 5
DocNo.022-0002 - Overview - RC77 ceramic 2. Hob Overview Fig.2-1 � ���� � ���� ������������� � � ��� ����� ����� �� �������������� ��������������� ����������� ��������������� �������� � ���� ������������������������� Art No. 315-0007 RC77 hob ����� ����� �� �������������� ����� � ���� ����������� ������������� ����������������� �� ������� ������� �� ���� ����������������� �� ������� � ������������� ��� ���� �������� The ceramic hob comprises of four cooking zones containing Fig.2-2 heating elem
Résumé du contenu de la page N° 6
Fig.2-5 � � � � �� � �� �� �� Art No. 315-0006 RC77 ceramic controls � � � � � � 1. Power ON/Power OFF 4. Dual element indicator 7. ‘–’ key 11. Key lock 2. Cooking zone lights (2 off) 8. Timer key 12. Key lock indicator light 3. Zone digital displays (4 off) 5. Dual element selector key 9. Timer digital display including zone selector light 6. ‘+’ key 10. Timer indicator lights (4 off) Using a lid will help the contents boil more quickly. Fig.2-6 Always take care before touching the surface,
Résumé du contenu de la page N° 7
Note: The ‘+’ keys have a repeat function: holding the key Fig.2-8 pressed down will increase the power setting by one level every 0.3 seconds. To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required. Note: The ‘–’ key has a repeat function: holding the key Art No. 315-0009 H indicator pressed down will reduce the power setting by one level every 0.3 seconds. To shutdown a cooking zone: Make
Résumé du contenu de la page N° 8
To adjust the preheat power level: Fig.2-11 Select the cooking zone (make sure the dot is illuminated) and then press the ‘+’ key to increase the power level. Pressing the ‘–‘ key after the preheat is underway will interrupt the operation, switching off the preheat and leaving the cooking zone operating at one power level lower. Art No. 315-0012 RC77 Timer on Timer Function The timer has two settings: Zone timer Minute timer Fig.2-12 Zone timer � ��������������� �� ����������� This allows one
Résumé du contenu de la page N° 9
Turning off the timer alarm: Power level Operating limit At the end of the cooking time the hob will beep steadily for 1 10 hours 2 minutes. Press any key to stop the alarm. 2 5 hours Deactivating the timer: 3 5 hours Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display 4 4 hours will return to ‘00’. 5 3 hours 6 2 hours Child Lock Function 7 2 hours This allows the control panel to be locked to prevent any 8 2 hours accide
Résumé du contenu de la page N° 10
DocNo.041-0002 - Cleaning gas 5-element 3. Cleaning Your Hob Essential information Fig.3-1 Allow the cooker to cool and then isolate the electricity � supply before carrying out any thorough cleaning. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not � mix different cleaning products – they may react � together with hazardous results. All parts of the hob can be cleaned with hot soapy wate
Résumé du contenu de la page N° 11
Cleaning Table � � � ������� �� � � � � � ����� ���� ���������� � Refer to the cleaning tables (Table 3-1 and Table 3-2) for details on cleaning the hob. ������� ��� �� ������������ ������� �������� ��� �� ������������� ��������� The cleaners listed are available from supermarkets or ����� � ��� � ������������������������� �������� ������� ��� �� � electrical retailers. For enamelled surfaces use a cleaner that is approved fro use on vitreous enamel. The Vitreous � ��������� �� �������� ���
Résumé du contenu de la page N° 12
DocNo.052-0001 - Troubleshooting ceramic & induction 4. Troubleshooting If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. A crack has appeared in the hob surface. Isolate the hob immediately from
Résumé du contenu de la page N° 13
INSTALLATION Check the appliance is electrically safe you have finished. DocNo.062-0002 - Installation - RC77 ceramic 7. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT BELOW. in a room containing a bath or shower. Should your customer have a problem relating to your This appliance is designed for domestic cooking only. Use for installation they will be able to contact you
Résumé du contenu de la page N° 14
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 The hob should be fitted into a work surface, which is at ������ ��� least 600mm deep. In position, the hob has a maximum ���� thickness of 5mm from the top of the work surface, and an overall thickness of 45mm (65mm max depth including the connection block). The cut-out dimensions are shown in (Fig.5-1), and the minimum clearances in (Fig.5-2). ����� ��������������� � ����� ������� �� N
Résumé du contenu de la page N° 15
INSTALLATION Check the appliance is electrically safe you have finished. Electrical Connections Fig.5-4 This appliance must be installed by a qualified electrician ��� to comply with the relevant Institute of Electrical � ���� �� Engineers (I.E.E.) regulations and also the local electricity supply company requirements. ����� WARNING: THIS APPLIANCE MUST BE EARTHED Note: All external wiring must comply with the IEE ����� � Regulations for the Electrical Equipment of Buildings. Connection to
Résumé du contenu de la page N° 16
DocNo.092-0002 - Circuit diagram - RC77 6. Circuit Diagram L N L N L N L N � � � � � � � � � � ��� �� �� �� � ��������� � � � � � ArtNo.080-0012 RC77 circuit diagram � ��� � �� � �� ��� � � � � �� � �� �� � � � � � �� � �� � �� � � � � � � � � �� � �� �� �� ��� ��� � � �� � � ��� �� �� �� �� �� �� �� � �� N L � ������� ��� �� ���� ��� �� � �� ��� ����� ��� �� ���� �� � �� �� � ����� � � ArtNo.050-0015 - Wiring colour �� � ��� � code table �� � ���� � � � ���� �� ����� ���� � ��� �� �� 14
Résumé du contenu de la page N° 17
DocNo.102-0002 - Technical data - RC77 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob COUNTRY OF DESTINATION: GB/IE Dimensions Overall: 45mm; Above worktop: 5mm; Height (65mm including connection box) Below worktop: 40mm Overall width 770mm; see ‘Positioning of the hob’ Overall depth 510mm Space for fixing See ‘Positioning of the hob’ Minimum space above hotplate 600mm Connections Electric 220 – 240V 50Hz Ratings Maximum electr
Résumé du contenu de la page N° 18
DocNo.111-0001 Warranty 8. Warranty/After Sales Service If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please
Résumé du contenu de la page N° 19
17
Résumé du contenu de la page N° 20
DocNo.000-0001 - Back cover Rangemaster � � �� � ����������� �������� ������� ������� �� w w w . r a n g e m a s t e r . c o . u k ArtNo.000-0003 CE logo
