Instruction d'utilisation Legacy Car Audio LCDCS94

Résumé du contenu de la page N° 1

LEGACY
LCDCS94
CD CHANGER DIN SOCKET
INSTRUCTION MANUAL
When you want to play the CD changer, plug the CD changer DIN into
the socket of the back of the car audio unit.
ANTI-THEFT DETACHABLE PANEL
FULL LOGIC TAPE AND DISC PLAYER
AM/FM STEREO DIGITAL PLL TUNING RADIO
WITH CDC CONTROL

Résumé du contenu de la page N° 2

LOCATION AND FUNCTION OF CONTROLS SPECIFICATION GENERAL Power Supply The Main Unit..................DC 13.8 Volts.Negative Ground Maximum Output Power........................................................4 x 35W Unit Dimension.............................................178(W) x 167(D) x 50(H) FM TUNER SECTION Frequency Range.......................................87.5MHz - 107.9MHz(USA) Usable Sensitivity......................................................................10dB Frequency Respo

Résumé du contenu de la page N° 3

TROUBLE SHOOTING Before going through the check list, finish wiring connection. If there still are 9. TUNE/SEEK/TRACK UP OR DOWN, FF/RW BUTTONS any question after finish testing the items in the following list, consult your In radio mode, press UP or DN button, it will start automatic tuning and nearest service dealer. stop at the next receivable station; press UP or DN button for more than 2 seconds to research for the higher or lower frequency station. In tape mode, press U

Résumé du contenu de la page N° 4

INSTALLATION 13.LOUD/SUB WOOFER Press it shortly to enhance the bass effect during bass mode. Press it more than 2 seconds, SUB WOOFER will be turned on. then press SEL button to select the sound mode such as volume, bass, treble, balance and fader, and then press + or - button to increase or decrease the volume level of the selected sound mode. Press it more than 2 seconds again to turn off the SUB WOOFER. 14.TAPE BUTTON Press it to switch from radio

Résumé du contenu de la page N° 5

PRECAUTIONS AND MAINTENANCE 17.RPT/METAL BUTTON In tape play mode, If a metal tape is used, press METAL button .1.This unit is designed for negative ground operation only. The equipment can to make the player in metal play mode, and MTL is indicated on LCD. be used safely, if the negative terminal of the battery is connected to the In CD player mode, press it to play the current track repeatedly. Press vehicle metal work. it again or eject the disc to cancel this mo

Résumé du contenu de la page N° 6

DISC PLAY: SPEAKER CONNECTION Cleaning discs: CDC SOCKET Before playing, clean the disc with a clean, lint-free. ANTENNA PLUG Flip the disc in the direction of the arrow. YELLOW WOOFER LINE OUT MEMORY B+ FUSED YELLOW FILTER BLACK(GND) BOX RCA LINE OUT RED R 0.5A &10A FUSES RED (B+) WHITE L 1 A BLUE AUTO ANT FUSE + + + + FRONT WHITE GRAY FRONT NOTE: RIGHT WHITE/BLACK GRAY/BLACK . Do not use so solvents such as benzine, thinners. Commercially available cleaners LEFT SP SP + + + +