Résumé du contenu de la page N° 1
CARE & INSTRUCTIONS MANUAL
INDUCTION COOKTOP
� IFA-90 AL
Note: To avoid accident and damage, please read these instructions carefully before operating the appliance.
Résumé du contenu de la page N° 2
EN GUIDE TO INSTALLATION AND USE Cooking Hob IMPORTANT : Save this manual for the local electrical inspector’s use. INSTALLER: Please leave this manual with the unit for the owner. OWNER: Please keep this manual for future reference. IMPORTANT: Local codes vary. Installation, electrical connections and grounding must comply with all applicable codes. IFA-9 90AL
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1 - Proper Installation - Be sure your appliance is properly grounded and installed by a qualified technician. 2 - Never Use your Appliance for Warming or Heating the Room. 3 - Do Not Leave Children Alone - Children should not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance. 4 - Wear Proper Apparel - Loose-fitting or hanging garments should never be worn while using the appli
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS 14. Utensil Handles Should Be Turned inward and Not Extend Over Adjacent Surface Units - To reduce the risk of burns, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units. 15. Do not Cook on Broken Cooktop - If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Cont
Résumé du contenu de la page N° 5
Table o of C Contents Before IInstallation 5 5 Installation 6 6 Other IInstallation R Requirements 7 7 Electrical C Connection 8 Safety P Precautions 9 9 Principle o of IInduction 1 10 Glass T Top, C Coil S Size a and C Controls 1 11 Controls a and O Operation 1 12 Heating Z Zones, C Coil S Sizes & & U Utensils 1 12 Power S Sharing 1 12 Utensils f for Y Your IInduction U Unit 13 Matching P Pots & & P Pans w with C Coils e etc. 1 13 To D Do o or N Not t to D Do 1 14 Cleaning R Recommendations 15
Résumé du contenu de la page N° 6
Before Installation If you are receiving the unit from a transportation company, it is customer’s obligation to inspect thepackage and note any damage on the delivery receipt. After delivery, have your induction cooktop carefully unpacked, and again check forany visible damage. If you find any damage onthe unit at this point, immediately inform your dealer or distributor. Although the responsibility for shipping lies with the carrier, your dealer/ distributor will assist you with your claim. If
Résumé du contenu de la page N° 7
10 m mm 4 cm mini 49 cm 1 / INSTALLATION To install the cooktop, cut out a rectangular IApply the gasket only along the front rim opening in the counter as shown on the and on both sides. Do not put this gasket on drawing and table below. Also, ensure that the rim in the back. This gasket will prevent you have a minimum of 10 mm (3/8”) of most of the spills from entering the cabinet space in the back of the unit, between the below and will keep the unit in place. Once rim and backsplash on your
Résumé du contenu de la page N° 8
Other IInstallation R Requirements etc.) which could obstruct the air inlet under Cabinet Above Cabinet Above your induction cooktop. Cross Although induction-cooktop heat rejection is Section minimal and the unit does not create any fumes in operation, such unit must be 750 mm 30” 750 mm (30”) installed underneath a properly sized ventilation hood for exhausting any smell, vapor and smoke created by cooking itself. Minimum 10 [3/8”] 40 [1 5/8" ] Clearance Also, a proper downdraft system can b
Résumé du contenu de la page N° 9
Electrical Connection cooktop e electrical c characteristics a are: Operating voltage................................................... 240 V~ 60 Hz Maximum power output .............................................. 9600 W 40A Connect to .............. 240 V, 60 Hz, 50 A minimum supply, (3 conductors #8 AWG) Electrical w wiring iinformation •240 V Connect the 3 wires as per the following An adequate electrical supply must be provi- ded for this unit. All wire connections and colour code grou
Résumé du contenu de la page N° 10
Safety P Precautions - R Read b before o operating y your c cooktop Your induction-cooking unit has been will disable the heating section of the unit. designed for residential use and food This occurrence is called ‘long press’ and preparation, and all of the safety parameters when it happens “-” signs will appear on have been rectified accordingly. power displays. The unit will act the same if there is an accumulation of some liquid on The unit incorporates numerous safety the keypad area, or i
Résumé du contenu de la page N° 11
The p principle o of iinduction When an induction element - also called: ‘a heating zone’, or simply: ‘a coil’ - is switched on, the appropriate utensil is used, and a desi- red level of heating power selected, the elec- tronic circuit unit (‘induction generator’ or ‘in- verter’) powers up the induction coil which creates a magnetic field. This magnetic field C continuously changes in terms of frequency and intensity, and this creates induced cur- B A rents in the bottom of the utensil and ultim
Résumé du contenu de la page N° 12
Glass Top, Coil Size and Controls 1/2 16 c cm(6” ) 22 cm (9”) 50 W à 2200 W 50 W à 2800 W 28 c cm Cooking zone 50 W à 3600 W 22 cm ( (9”) 1/2 Control zone 50 W à 2800 W 16 c cm ( (6” ) 50 W à 2200 W • DESCRIPTION OF THE CONTROL POWERING ON • PANEL Press the start/stop touch control for the zone you want to use. A flashing "0" indicates that the zone is on. You can then choose the desired power level. If you do not select a power level, the cooking zone will automatically shut off. ADJUSTING THE
Résumé du contenu de la page N° 13
• WHICH COOKING ZONE • POWER SHARING SHOULD YOU USE BASED ON Under the pretense that only one zone is YOUR COOKWARE? used with an adequate utensil covering the whole surface of the coil, and that power on the zone is adjusted to the maximum (‘12’): - the maximum power output of 22 cm (9”) heating zone is 2.8 kW; - the maximum power output of 16 cm (6 1/2”) heating zone is 2.2 kW. If only one coil is employed, it can be utilized at its maximum power, but as soon A as the other coil is turned on,
Résumé du contenu de la page N° 14
Utensils for Your Induction induction cooking, but most manufacturers Induced current can be created only in make such utensils in layers for better heat materials which have magnetic properties. distribution, and a good number of such Thus, utensils for use with an induction unit pots and pans can be used with induction. must be made from a ferromagnetic material To make sure if a stainless steel utensil can or have inserts with magnetic properties. be used perform the utensil test. Your househ
Résumé du contenu de la page N° 15
To Do or Not To Do You must: - Avoid storing flammable products in the cabinets under your cooktop. - Always place your utensil such that its center is aligned with the centre of the coil. - Never leave an empty utensil on an induction heating element, even when the - Avoid hitting the vitroceramic glass with element is turned OFF. utensils or any hard objects - the glass surface is highly resistant but not - Only use maximum power for boiling and unbreakable. frying. - Pick-up your utensils whe
Résumé du contenu de la page N° 16
3 / DAILY CARE OF YOUR APPLIANCE • MAINTAINING YOUR APPLIANCE Cleaning of an induction cooktop is easy. Read and follow these recommendations: TYPE O OF S STAINS/SPOTS WHAT T TO D DO ACCESSORIES o or AGENTS E EMPLOYED Soak the area to be cleaned with Minor Cleaning sponges & mild soapy water, then wipe it. detergents Soak the area to be cleaned with Accumulated burn-on Cleaning sponges, mild warm soapy water. Use a special stains. detergents and cleaning scraper for vitroceramic glass to agents
Résumé du contenu de la page N° 17
4 / SPECIAL MESSAGES, DIFFICULTIES You have doubts about whether your hob is working correctly. This does not necessarily mean that there is a breakdown. Nevertheless, check the following points. PROBLEM POSSIBLE E CAUSES WHAT T SHOULD D YOU U DO? When you switch the unit on, the Your unit may be connected Have the connection checked supply-line breaker trips off or the incorrectly,or there is an first. If the connection is OK, supply-line fuse burn. internal problem. contact your service agent.
Résumé du contenu de la page N° 18
FAGOR AMERICA, INC. PO BOX 94 LYNDHURST, NJ 07071 Toll Free: 1.800.207.0806 Email: infoappliances@fagoramerica.com www.fagoramerica.com The manufacturer reserves the right to modify the items described in this manual.
