Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
English TABLE OF CONTENTS IMPORTANT PRODUCT SAFETY INSTRUCTIONS ...................................................................... 1 SAFETY GUIDELINES............................................................................................................................... 2 FCC COMPLIANCE STATEMENT .............................................................................................................. 2 CLEANING THE LCD MONITOR....................................................
Résumé du contenu de la page N° 3
English IMPORTANT PRODUCT SAFETY INSTRUCTIONS Follow and obey all warnings and instructions marked on the LCD Monitor. For your safety, please read all the safety and operating instructions before you operate the LCD Monitor Keep this user’s manual for future reference. Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on
Résumé du contenu de la page N° 4
English Safety Guidelines CAUTION: The power supply outlet should be located near the LCD Monitor and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Switzerland .........SEV Canada.............CSA Britain .................BASE/BS Germany..........VDE Japan .................Electric Appliance Control Act IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
Résumé du contenu de la page N° 5
English Cleaning the LCD Monitor • MAKE SURE THE LCD MONITOR IS TURNED OFF • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2. If it still is not clean, a
Résumé du contenu de la page N° 6
English FEATURES • Bright Display Image • Lightweight • Ultra Fast Response Time • Stereo Speakers • Power Saver • Kensington Security Lock Compatible • Safety Certifications Power Saver A power control system, Power Saver, is installed inside the LCD monitor. If the LCD monitor has not been used for a certain period of time, the system will turn the LCD monitor to low voltage mode to save electrical power. Slight movement of the mouse or pressing any key on the keyboard will return th
Résumé du contenu de la page N° 7
English INSTALLATION Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and practical, this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution. Package Contents Your product package includes: • 19” Westinghouse LCD Monitor • Detachable Base Stand • AC Power Cord • VGA (HD15) Male – Male Cable • 3.5 mm Male – Male Stereo Audio Cable • User’s Manual • Warranty Card 5
Résumé du contenu de la page N° 8
English Front View of the LCD Monitor Use the buttons on the front of the LCD Monitor to display the On Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 11. 7 7 1 6 2 5 3 4 • Switch between picture, text and economy modes. 1. Turbo/ • Move a selection up when the OSD is displayed. • Automatically optimize positions, phase, and clock when the OSD is not displayed. 2. Auto/ • Move a selection down when the OSD is displayed. • Quick contrast adjustment or decr
Résumé du contenu de la page N° 9
English Rear View of the LCD Monitor 1 4 5 23 • Connect the power cord from AC IN to a power 1. AC IN (Power) source. • Using the cable provided, connect to the Audio out 2. Audio-IN (Green) from a computer. • Using a 24-pin DVI cable, connect to a computer or 3. DVI-D other device with a DVI output. • Use the enclosed 15-pin VGA cable, connect to a 4. D-SUB (VGA) computer or other device with a VGA output. 5. Lock Hole • For use with Kensington security locks. 7
Résumé du contenu de la page N° 10
English Installation 1. Attaching the Base Stand to the LCD Monitor Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and snap into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base. 2. Connect Audio and Video Cables to a PC Connect one or all of the following into the back of the LCD Monitor IMPORTANT: Before beginning, make sure all devices are turned off. AUDIO CONNECTION: Connect a stereo mini cab
Résumé du contenu de la page N° 11
English 3. Connect Power Cables Connect the AC power adapter cord to the LCD Monitor (to the connector labeled “AC-IN”) and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet. 4. Turn the Power On Press the power button on the front of the LCD monitor. The LED light will turn blue if a signal input is detected or it will be orange if no input is detected. 9
Résumé du contenu de la page N° 12
English Mounting the Monitor on a Wall 1. Remove the base from the LCD monitor. 2. Remove the plastic covers and screws to remove the LCD monitor stand neck. 3. Use the 100mm VESA hole pattern on the back of the monitor to secure a Westinghouse Décor Wall Mount to the monitor and mount it on a wall. 10
Résumé du contenu de la page N° 13
English OSD Menu Functions All the function settings for the LCD monitor are controlled via the control keys located on the bottom part of the front panel. To display the OSD main menu, press the “Menu” keypad button on the control keys. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.) The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the monitor settings can be made using the OSD menu.
Résumé du contenu de la page N° 14
English Image Menu Function Description Brightness Adjust the brightness of the screen. Contrast Adjust the contrast of the image. Sharpness Adjust the picture sharpness of low resolution pictures. Clock Adjust the LCD monitor clock. (Optional) Phase Adjust the LCD monitor phase. (Optional) H. Position Move the image left or right on the screen. (Optional) V. Position Move the image up or down on the screen. (Optional) 12
Résumé du contenu de la page N° 15
English Audio Menu Function Description Volume Adjust the volume of the audio. Mute Disable the audio. 13
Résumé du contenu de la page N° 16
English Color Menu Function Description Color temp User/9300K/7500K/6500K/sRGB Red Adjust red color. Green Adjust green color. Blue Adjust blue color. 14
Résumé du contenu de la page N° 17
English Misc Menu Function Description English, Français, Italiano, Deutsch, Español, , Language , , Русский, OSD time-out Adjust OSD display time setting. Move OSD display position to any one of the following 5 OSD position positions within the overall screen. 1 2 3 4 5 Reset Restore LCD monitor to factory settings. Input Select Analog / Digital Auto setting Adjust clock, phase and positions automatically. (Optional) CM Engine Color Management Engine. (Optional) 15
Résumé du contenu de la page N° 18
English Info Menu Function Description Resolution Displays resolution. Horizontal Displays horizontal frequency. frequency Vertical Displays vertical frequency. frequency 16
Résumé du contenu de la page N° 19
English Quick Adjustments You can skip the Menu pages and display an adjustment scale directly by using the following button operations: • Brightness: Press the Brightness button when the Menu is not displayed. • Contrast: Press the Contrast button when the Menu is not displayed. • Auto Setting: Press the Auto button when the Menu is not displayed. • Turbo: Press the Turbo button when the Menu is not displayed to switch between picture modes. 17
Résumé du contenu de la page N° 20
English Display Modes The monitor backlighting can be controlled by using the Turbo button on the control keypad. There are 3 modes: Economy, Text, and Picture. To toggle between these modes, press the Turbo key until the mode you desire is selected. These modes automatically change the backlighting levels between bright, brighter, and brightest. 1. Economy Mode – Reduced brightness 2. Text Mode – Normal 3. Picture Mode – High brightness NOTES: • Changing to a lower brightness mode ca
